VBar NEO for external transmitters
Helico helicopters with NEO that still fly without VBar Control
| Subject | Views | Posts | Last post |
|---|---|---|---|
| NEO electric governor translated by dedge | Views: 0 | Posts: 15 |
26 July 2015 21:3926.07.2015 21:39 by RV |
| Setting up rescue function on Graupner MX20 (third-party transmitter)??? translated by UdoP | Views: 0 | Posts: 14 |
26 July 2015 12:3926.07.2015 12:39 by Wolfram |
| Some NEO questions translated by tsv | Views: 0 | Posts: 6 |
26 July 2015 10:3826.07.2015 10:38 by tsv |
| Graupner MC32 @Neo with rescue translated by Fingolf | Views: 0 | Posts: 5 |
26 July 2015 01:2126.07.2015 01:21 by ikarus991 |
| Engine idling, does that matter? translated by linken98 | Views: 0 | Posts: 4 |
25 July 2015 22:2725.07.2015 22:27 by stefan_heli |
| Servos are not working after resetting VBar NEO translated by AKOE | Views: 0 | Posts: 12 |
25 July 2015 17:0025.07.2015 17:00 by RV |
| Serial number translated by helicopter-fan | Views: 0 | Posts: 8 |
24 July 2015 22:1424.07.2015 22:14 by RV |
| VBar Neo: No connection with PC software for Mac translated by robert-galitz | Views: 0 | Posts: 5 |
24 July 2015 18:3924.07.2015 18:39 by robert-galitz |
| How to test the rescue function on the workbench? translated by UdoP | Views: 0 | Posts: 7 |
24 July 2015 05:3724.07.2015 05:37 by UdoP |
| Pitch and roll sensor out of measuring range translated by Thomas.J | Views: 0 | Posts: 13 |
23 July 2015 14:1123.07.2015 14:11 by Thomas.J |
| Vstabi NEO PC software translated by benben | Views: 0 | Posts: 21 |
23 July 2015 08:2523.07.2015 08:25 by Alex1971 |
| Key file cannot be downloaded translated by mgstt | Views: 0 | Posts: 4 |
22 July 2015 16:5422.07.2015 16:54 by mgstt |
| Pitch path changed (compared to the old vstabi) translated by linken98 | Views: 0 | Posts: 5 |
22 July 2015 12:3022.07.2015 12:30 by linken98 |
| Neo PC Software - Heck Gain / Optimizer - Labeling translated by exxe26 | Views: 0 | Posts: 6 |
22 July 2015 11:2322.07.2015 11:23 by RV |
| Fail Safe with spectrum translated by Uzzi | Views: 0 | Posts: 2 |
22 July 2015 11:1222.07.2015 11:12 by RV |
| Signals pass through AUX2 and AUX3 translated by fabfour | Views: 0 | Posts: 11 |
21 July 2015 04:1321.07.2015 04:13 by fabfour |
| Re: neo esc channel output translated by 3Daemon | Views: 0 | Posts: 3 |
21 July 2015 01:2121.07.2015 01:21 by 3Daemon |
| neo no default translated by Christoph | Views: 0 | Posts: 9 |
20 July 2015 21:0220.07.2015 21:02 by Christoph |
| Neo without VLink translated by samoht80 | Views: 0 | Posts: 5 |
20 July 2015 14:4320.07.2015 14:43 by Eddi E. aus G. |
| NEO - "no connection" with PC software translated by UdoP | Views: 0 | Posts: 17 |
20 July 2015 09:2520.07.2015 09:25 by Eddi E. aus G. |
| VBar Neo, Castle ESC, Futaba T8FG with S-Bus receiver translated by TomD | Views: 0 | Posts: 18 |
19 July 2015 21:1819.07.2015 21:18 by RV |
| Neo saved my 480. translated by snafu9241 | Views: 0 | Posts: 1 |
19 July 2015 17:5319.07.2015 17:53 by snafu9241 |
| neo esc channel output translated by josh.evans | Views: 0 | Posts: 6 |
19 July 2015 17:4419.07.2015 17:44 by RV |
| Cyclical and collective pitch at Neo translated by ben1 | Views: 0 | Posts: 7 |
19 July 2015 10:5619.07.2015 10:56 by ulrich |
| Governor (external or Neo-internal)??? translated by UdoP | Views: 0 | Posts: 3 |
19 July 2015 08:3419.07.2015 08:34 by UdoP |