Transmitter zero check

If you have some effects like drift or unknown commands it would be a idea to check the transmitter signals too. We had some bad pots in the past as reason for VBar issues and so we decided to create a transmitter check plugin.

You may be able to detect drift issues and changing neutral points with this tool.

First download the file:

Download TX_analyze plugin

Unzip it into the "plugins folder of your VBar installation (V5.3 and more required). E.g. c:\program_files\vstabi_53\plugins - after this move the lupe.png to the /images folder in your VBar installation.

Then open the PC software and click on the plugin menue, select the TX plugin.

 plugin

 plugin_screen.preview

After this the plugin will start and show the current TX values in 3 different ways:

  • a continiously ongoing graph
  • a number with the digital value used by the VBar
  • a bar with the current value

The graph can be used to discover drift effects, e.g. from cold to warm or running the TX for a long time. It can also be used to discover effects on other (untouched) channels while moving a stick. The range is set up with +- 125 digits around center.

The number shows the raw data going into the VBar from your TX/RX. 1600 digits are 100% in Vbar.

The bar shows the same as the raw number but scaled to +-125 digits max.

Bar and numbers can be used to check the zero position after stick moves or interactions with other functions.

VStabi VStabi Pioneer of Flybarless