josh.evans
18 July 2015 17:0118.07.2015 17:01
Hi just got neo whilst setting it up we have come across a problem with the esc output with it not outputting what the transmitter is doing but yet showing correctly on the wizard on the pc? Using a Spektrum dx8
Hope you can help
RV
18 July 2015 21:0018.07.2015 21:00
The ESC outpu does what you have set up as outgoing signal in each bank / autorotation.
If the Motor switch is on - the ESC banked value will be set.
If it is togggled to AR after "on" - the AR will be set.
It fit is off - the Value fro Motor off (gov2) is set.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
josh.evans
19 July 2015 12:0419.07.2015 12:04
Sorry could you explain in a bit more detail. So it doesn't work the same a the old v5.3
RV
19 July 2015 15:2819.07.2015 15:28
The ESC output handling for 3rd party radios works in the same way as it does with VBar Control. and this is different from 5.3 - of course.
We need the same switch status infos etc. because there are used in the control loops too for better performance (e.g. Autorotation is different than Motor on).
Just see it as flight condition setup in VBar.
Anyway - if you want to get several Headspeeds with a ext. Gov and non-VBC Radio in one bank - just give us the inputs needed for Bank and Motor switch status - and e.g. use AUX3 independently for "your" output to ESC with values you like from TX.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 19.07.2015 15:29 von RV.
josh.evans
19 July 2015 17:1019.07.2015 17:10
So am I reading this correctly do I need to plug the esc into aux 3 and change than into channel select on the vbar wizard?
Thanks for your help sorry to be a pain trying to get my head round all this new information
Josh
RV
19 July 2015 17:4419.07.2015 17:44
Yep - but keep in mind to assign the Motor channel in the NEO too - with its 3 needed values. You may possibly need another channel to get this correctly.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.