← Setups

Roban B412 800 Size Help translated

Public Talk › Setups · Started by Nate_Dallas on 13 October 2025 17:5913.10.2025 17:59
Nate_Dallas 13 October 2025 17:5913.10.2025 17:59
Hello all,

I recently purchased a Roban B412 from a friend who was previously flying it with a Bavarian Demon flight controller. I am having a difficult time with making the transition over to the VBAR Neo (I have several 3D helis all using VBAR though). The blades are balanced, weighed correctly, and I have confirmed all linkage lengths and leveled the swashplate.

I have also watched Rainer's video on how to adjust the phasing, and attempted to follow it every step of the way. Even though I have limited the elevator and aileron movements to their respective blades, upon trying to take off, the helicopter wobbles uncontrollably and I have to shut the heli down.

Was wondering if anyone else is flying a Roban 700 or 800 size heli and if so, whether they could help me troubleshoot?

Thanks,
Nate



Edited 1 time(s). Last edit at 10/13/2025 07:10PM by Nate_Dallas.
RV 13 October 2025 20:0613.10.2025 20:06
Hello Nate,

please provide us more info ... what does the heli do, what do you expect, what is the stick movement at the "issue"?

Also - some basic data about servos, headspeed, weight, basic setup values etc. would be nice.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Nate_Dallas 13 October 2025 21:3713.10.2025 21:37
Thank you Rainer! Absolutely will do. I'll respond back this evening when I get home with detailed responses/recorded parameters. But I do know that the headspeed is set at 1100 RPM.

At a very rudimentary level, the heli wobbles around like an off balance frisbee when applying sufficient cyclic to get it off the skids and begin to hover. I have the pitch set at 3.5 at mid stick with a max of 11 positive, and 4 negative.
Nate_Dallas 14 October 2025 03:3714.10.2025 03:37
Attached are photos of the current swashplate, linkages and swash timer. Upon looking at it closely I do not think this is set up correctly. The linkages from the blade grips to the uniballs on the swash plate are angled instead of being vertical, and the swash timer appears to be off. Should the swash timer be equidistant between the uniballs to the linkages? The Roban manual unfortunately does not have any information on this.

The servos are all Savox SV-1254MG.

Before going further down the troubleshooting, can someone please confirm whether the linkages from the swashplate to the rotor head appear correct?

JMalberg 14 October 2025 18:0514.10.2025 18:05
Hi Nate,

as written in FB you have to turn the SP about 40°.

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
machine-translated from German · Show original
Nate_Dallas 14 October 2025 18:1214.10.2025 18:12
Thank you! I will do that this evening and upload photos.
RV 14 October 2025 19:1414.10.2025 19:14
Yep - turn the swash driver on the main shaft unless the rods go straight first. Then rotate the swash in the setup as in my video to have the 90 deg "leading" input. Small hint ... most helis have 85 or 80 only - so clicking 1-2 clicks backwards after the 90 deg is done is a good point to start.

After this redo the collective setup, probably the rods are too long now and need some shortening with the ball links.

I would start having all at 0deg in center (Trim) tab as per instructions here:

https://www.vstabi.info/en/node/2551

After all is done you can dial in your collective curves as likely - but as last step please. Don't forget to set the 0deg point again if you don't have 0deg at stick center then.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 2 time(s). Last edit at 10/14/2025 07:20PM by RV.
Nate_Dallas 15 October 2025 03:0715.10.2025 03:07
OK, I think I have it set up correctly now. I entered into the trim menu (long click) to hold everything at dead center. I then removed the links from the swashplate to the blade grips, and loosened the set screw on the swash timer. At that point I rotated the swashplate until they appeared correct. At that point I adjusted each link rod until each blade measured at 0 (+/- .1) degree. What's interesting to me is that the 8 degree calibration required a value of 64. Is that amount concerning?

Once I had everything level, I then adjusted the phasing.

The odd thing is that going two clicks to the right gave me a near perfect result as shown in my video here: https://youtu.be/qYUR_QuTbgI

Phasing troubleshooting

Attached are photos of how things now look as well. Am I on the right track?



Edited 1 time(s). Last edit at 10/15/2025 03:14AM by Nate_Dallas.

Fingolf 15 October 2025 06:5815.10.2025 06:58
Yes, it looks better now.
64 sounds valid.

Stephan
machine-translated from German · Show original
Nate_Dallas 15 October 2025 16:3515.10.2025 16:35
Thank you Stephan! Should I be concerned that the phasing required me to go two clicks to the right? In Rainer's video he mentioned adjusting to the left for CCW rotation.
RV 15 October 2025 21:1615.10.2025 21:16
The video is perfectly done.

The direction of CW/CCW click to 80 instead 90deg ... it should be usually as i said in the video - but - if all the movements are correct (stick, gyro) and it is in opposite direction - just do it.

@ Stephan: could you check the rotation with your Airwolf (has 2 blades, but same mechanics and also ccw)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Nate_Dallas 22 October 2025 06:1622.10.2025 06:16
One question for the group - does anyone know if I can use vbar Evo with a fly wing H1 gps controller? If so, any guidance on how to do this would be very much appreciated.
Eddi E. aus G. 22 October 2025 10:0722.10.2025 10:07
Hi Nate,

from what I understand, this gadget goes between a receiver with a suitable single line output, and outputs dedicated servo signals to three swash plate servos plus tail plus throttle.

So technically, you could program a VBar RX-Only or VBar VBasic to output e.g. S.BUS to it, program the gadget accordingly, and let it do its thing.

But the VBar in this configuration would only be YaR, yet another receiver, not a flybarless, and without Rescue or other features.
Same as if you put one onto of those onto an OMP M# or Goosky S#, use their own flight control, or put any other flybarless flight control behind it.

I think with Beginner Mode of VBar (part of the Rescue update), you're not missing out on much but coming home, plus in my most humble opinion, you have the way better flight control.

—Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless