jamesf
9 April 2026 17:2709.04.2026 17:27
Equipment list below:
BK117 Heli-factory (based on Robbe?) PHT3 v1
CCW rotation
M-Blades on head and tail
headspeed 1250
EVO vbar running latest firmware
EVO Control running latest firmware
Heli was purchased secondhand with a different fbl installed.
Added the EVO and went to test fly.
(For background I also have EVO in starwood turbine lama, hirobo 30size convereted electric lama, align dfc 550)
Issue:
At the point of lift off the heli does a sudden and violent roll to the right.
Occasionally after the roll to the right, then then nose would lift until boom touched floor.
As you can imagine, this is scary!
To try and sort the issue:
re-checked balance of heli.
Changed 4 swash servos for brand new ones (0.06s , 22kg).
went through complete mechanical swash linkage setup from scratch.
re-checked swash rotation in vcontrol. rotated using 'left' button, as same setup as Rainer's bo105 video.
ensured not too much counter torque tail pitch - thought originally that the high position of tail and too much 'left rudder' might have caused this. have adjusted tail so now nose is drifting to right at point of lift off so not that.
played with head gain and agility etc across the range, played with tail gain and agility etc across range, but still does it.
Is it possible to extract logs from the Vbar to find what the cause of this might be, or better, to find what i need to change to stop it happening?
Thanks in advance for any assistance,
James
RV
9 April 2026 21:2209.04.2026 21:22
Hello,
for first please lets check basics:
- is the VBar orientation setting in setup OK?
- attach some photos of the VBar where we can see its mountig place etc.
- in Setup mode, one blade above tail, when applying elevator nose down - does it move, and if - does it increase pitch or decrease?
- in Setup mode, one blade above tail, when applying aileron to right - does it move, and if - does it increase pitch or decrease?
- save setup file on VBC, await cloud sync and let me know.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jamesf
9 April 2026 23:1609.04.2026 23:16
Rainer, thanks for reply.
So yes orientation correct, upright with wires fwd.
Attached photo, its mounted on glass fibre plate on front of mechanics. Previous fbl mounted there also.
Blade over tail - No movement on elevator nose down.
Blade over tail - decreases in pitch with right aileron input.
setup saved as "BK117"
Eddi E. aus G.
10 April 2026 09:1710.04.2026 09:17
Hi James,
just the photo: how's that mount mounted? It looks almost as if it's hovering in the air ...
I suppose, just with the front end, to the mechanics?
This is imo probably one of the worst ways to do it, if so: the plate can and will spring with resonance like a diving board, and the VBar and its sensors with it. Shake it, baby! Even worse with the VBar mounted in this orientation, because in the VBar, the sensors are placed close to the USB port, so more or less at the end of the spring board, where it springs most.
In anticipation of the argument ;-) different FBL have different layouts, are of different size and mass, and therefore react differently.
But in the end, they're all doing the same, and would suffer or benefit from the same, just to a different degree.
Apart from what Rainer's feedback will be, I'd strongly recommend mounting the VBar differently or elsewhere, e.g. on the wooden framework.
Best,
Eddi
Born to fly ...
forced to work.
Eddi E. aus G.
10 April 2026 09:2210.04.2026 09:22
jamesf
10 April 2026 09:5210.04.2026 09:52
HI Eddi,
Thanks for reply.
That's a 2mm thick solid g10 plate, bolted to the mechanics. There is absolutely no movement in it.
Possibly could be effect of very high frequency interference from the turbine mechanics, that would be damped by mounting the EVO to the fuselage.
Bernhard at HF has been mounting FBL in this way on these mechanics for many years it appears, but indeed as you already anticipate, he uses different manufacturer of FBL.
For the photo you provide, i have always been told that due to measuring angular velocity the FBL should be on the centreline, but these photos prove me wrong... is it because there are 2 units connected, one either side of the body shell, or can the EVO be mounted out towards the side of the model?
I'll make the change to move the EVO to similar position to Rainers, but as i'm sure you'll be aware, this will be a complete reinstall
Eddi E. aus G.
10 April 2026 11:0610.04.2026 11:06
Hi,
well, just my 2 cts :-) I can't touch or wiggle it to see how sturdy it actually is.
Also Henseleit pilots were experiencing odd effects, on models where the gyro mount was a carbon spring board (I like the word ^^).
Rotating the NEO by 180° (sensors closer to the actual mount) did the trick there (mind to change it in Setup, too ;-) )
And right, it's actually the high frequency stuff which messes with the sensors, not what low frequency bounce you'd correlate with an actual spring board.
If an fbl would have to be in the exact rotational center, it would have to be on all axis, which is ... not possible.
In fact, the angular velocity (°/sec) is the same close to the rotational center and like one meter out.
It's just that close to the center, the distance travelled is less, and that swing, spring or flex of the mount won't cause as much deviation.
Rainer actually has a master EVO (the one mounted flat as expected), of which the gyros are used, and an Extender (the one mounted at an odd angle), of which only the receiver and the servo ports are used.
In practice, it makes little to no difference where the gyros are mounted, as long as the mount moves the same as the axis which are to be controlled/stabilized. Else it would already cause ill effects if the gyros were mounted behind or in front of the mast (both for elevator and tail), only aileron would be aligned, and then possibly even not in the exact rotational axis of the model but also with an offset.
Long story short :-) nae bother.
Best,
Eddi
Born to fly ...
forced to work.
Edited 1 time(s). Last edit at 04/10/2026 11:07AM by Eddi E. aus G..
RV
10 April 2026 22:0510.04.2026 22:05
Quote:Attached photo, its mounted on glass fibre plate on front of mechanics
Worst Case here - really. Please visit the Links above how to do this "best practice". Stick it to the bottom on the plywood.
I mention this also here:
https://www.vstabi.info/en/node/2549
Quote:The installation location of the Master EVO should be chosen so that there are as few entries as possible from disruptive things (e.g. vibrations, electric magnetic fields or even static discharges). It would therefore be good to mount it on a plywood board, for example, which is securely glued to the dome or fuselage floor.
Quote:setup saved as "BK117"
Which VBC SN? - There is no VBC registered for the email address used in the forum.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jamesf
10 April 2026 23:4110.04.2026 23:41
27002770 is serial.
kind regards
James
27002770 is serial.
kind regards
James
jamesf
10 April 2026 23:4410.04.2026 23:44
can you advise what issue mounting on g10 material in that location would cause? Is the EVO not shielded against turbine interference?
RV
10 April 2026 23:4810.04.2026 23:48
Hello James,
the online files (Log and setup) seem to be okay.
So - please change the position of the EVO as recommended.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Hello James,
the online files (Log and setup) seem to be okay.
So - please change the position of the EVO as recommended.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
jamesf
13 April 2026 12:5413.04.2026 12:54
so changed position of Evo over the weekend, to under the cockpit at the front, went to test fly this morning and ... well... it was another 10 mins of trying to launch itself into the ground.
Changed various gains etc but didn't seem to make any difference.
So pretty sure that where it was mounted was not the issue.
Is it possible to see logs of what the gyro is seeing/doing when this is happening?
My only option now is to pull another EVO out of a model and fit to this one to see if its the hardware?
Eddi E. aus G.
13 April 2026 13:2413.04.2026 13:24
Hi,
hm, OK, but still one thing checked off the imaginary list.
You can see the logs on your transmitter (Flight finder) or in the cloud, after your transmitter was idling and on a WiFi for some time, has pushed them out there. Last logs from April fifth, and the one log with engine runtime has nothing particular in it. Probably older than the first time it actually happened, probably only a test run.
What could be more interesting is the live vibration analysis (see Model Status, on your transmitter), particularly the live graph there.
Better have someone watch or video it so you can concentrate on keeping the model alive.
Please describe a bit more:
. just after power up, all good?
. when the turbine has spooled up into idle, still all good? (check/screenshot vibration analysis now)
. when you spool up for takeoff, still all good? (again vibration analysis)
. when (at 0° collective) you gently touch the cyclics, does the main rotor tilt into the expected direction?
. when you make the model go light on the skids, do you feel that the model is already leaning to the right, or better, do you see the servos/swash plate doing uncontrolled things..?
If in doubt, a cross check with a different EVO would of course help narrowing down if it's the EVO itself (issue gone) or something on the model (issue remains).
Careful at all times ... but I guess I don't have to point that out :-)
Best,
Eddi
Born to fly ...
forced to work.
jamesf
13 April 2026 14:0413.04.2026 14:04
Helicopter very smooth even on spool up.
can't see the swash as hidden within the bell housing - hence why wanting to see what movement it has been commanded to give as the collective comes up.
only tries to kill itself just at point of lifting up, looks like a sudden pure alieron or pure elevator input is given - honestly i can't believe its still in one piece such is the suddeness and angle it goes over.
it doesn't start leaning as the collective comes up, not like holding an input and adding collective - its more like it's at the point of just lifting off, then someone heaves the stick over.
Perhaps Rainer can provide his values used on his BO105 - a very simliar setup - and i'll do a swap between models..
Eddi E. aus G.
13 April 2026 15:5013.04.2026 15:50
Hi,
I see. Thing is, the swash plate can be a tell tale for vibration issues (of the more serious kind), when it becomes wobbly when the drive system is running, or at certain rpm, moving unmotivated, or (repeatable) moves to one direction every time you trigger it with the right (or wrong ...) vibration.
There's a video from a competitor where you could see the swash plate level in bank 1 (1,800 1/min in this case), level in bank 2 (2,000) and –ssst– move right-forward in bank 3 (2,200 1/min), –ssst– back to level in bank 2 or 1. Cause in this case: high frequency and hard/steep vibration from a multi stage gearbox.
But that happened also at 0° collective, not only and not only suddenly when the model got light on the skids.
What you describe sounds somehow like something what Rainer experienced some years back: he made a change to his helicopter setup and accidentally changed the orientation of the VBar sensor (back in the day when there was still computer software, and even more back when there was no safety-confirmation pop-up, like, (Do you really want to do that? (y) (n)).
Model spooled up just fine, but when he lightened it, it almost nosed-in, with the sensors coming into play.
No way to control it, but luckily he just hit throttle hold, the model bounced onto it's undercarriage, no harm done.
I guess you triple-checked already, but does the swash plate counter the movements properly (direction-wise), when you roll or pitch the model in your hands? Same goes obviously for the control inputs, also with the swath plate rotation in mind.
Or maybe it's time to start over with a different unit, and at that time, triple-check everything (again) ...
Best,
Eddi
Born to fly ...
forced to work.
Fingolf
13 April 2026 16:2313.04.2026 16:23
It is possible to do a video?
And maybe a start without blades and check the vibration status.
Stephan
RV
13 April 2026 19:0913.04.2026 19:09
@Eddi:
The gearbox is a 2-stage belt drive here ...
Please watch the Blade angles in correlation of the rotation direction. Therer is where it counts - independend from any blade count - we have checked this above but would be good to see in a video.
So - we need to know again for cross check:
- Rotation direction (i assume CCW)
- photo of the VBar palcement now (should see all orientation in fuselage)
- setup file (through cloud)
- Blade over tail boom, aileron to left, which movement? (should increase positive)
- Blade on the left side 90deg, aileron to left, which movement? (should be none)
- Blade on the left side 90deg, moving model aileron nose up, which movement? (should increase positive)
Asking for my BO105 - You can't compare the rotation as it has a 3x120deg swashplate. But let check above first before trying to lift off again.
If this is all correct - 'll go also with anothe runit, but lets see first.
- Blade over tail boom, elevator nose down, which movement? (should be none)
- Blade on the left side 90deg, elevator nose down, which movement? (should increase positive)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 2 time(s). Last edit at 04/13/2026 09:37PM by RV.
jamesf
13 April 2026 20:4913.04.2026 20:49
for your Bo105, it was more regarding gains/expo/response
I've swapped EVO to different one 27006493
I'll put a video up shortly for you, thanks for your help and time on this.
jamesf
13 April 2026 21:1213.04.2026 21:12
RV
13 April 2026 21:3613.04.2026 21:36
First - thanks for the video - looks good with the sticks.
Second - have a look at the VBar orientation. the cloud says upright, cable to front. But it is mounted cable to tail ... please check the gyro directions as asked above too ;-)
About the values for my 105 - i have copied my setup to your cloud, just have a look there ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 04/13/2026 09:38PM by RV.
jamesf
13 April 2026 22:4313.04.2026 22:43
Eddi E. aus G. Wrote:
-------------------------------------------------------
>
> What you describe sounds somehow like something
> what Rainer experienced some years back: he made a
> change to his helicopter setup and accidentally
> changed the orientation of the VBar sensor (back
> in the day when there was still computer software,
> and even more back when there was no
> safety-confirmation pop-up, like, (Do you really
> want to do that? (y) (n)).
>
Seems Eddi was right on the money!
And for me, well if it wasn't that the actual Mikado guys have had the same mistake then I'd feel even worse :-) :-)
Yep, such a simple mistake to make, i guess my brain just saw the antenna cables sticking out the new receiver and ...
no wonder it was trying to kill itself, and to think i'd spent about 20 mins of spool up time trying to get it off the ground :-)
Some classic "Pilots Confirmation Bias" for me, what a fool I am, thanks Rainer and Eddi for sticking with me on this. :-)
J
Edited 1 time(s). Last edit at 04/13/2026 10:44PM by jamesf.
Eddi E. aus G.
14 April 2026 08:5414.04.2026 08:54
Happy now :-) brilliant!
It's like, been there, done that, and sometimes you miss the forest for the trees ...
And the credit actually goes to Rainer, first post:
Quote:RV
- is the VBar orientation setting in setup OK?
Cheers!
Eddi
Born to fly ...
forced to work.
Fingolf
14 April 2026 10:1814.04.2026 10:18
Perfect
Stephan
Perfect
Stephan
jamesf
20 April 2026 10:1420.04.2026 10:14
amazing how much more fun it is when everything installed correctly :-)
first flight all good!
https://youtu.be/Q86fyFb0hwI
Eddi E. aus G.
20 April 2026 11:4820.04.2026 11:48
:-)
Born to fly ...
forced to work.
:-)
Born to fly ...
forced to work.