So I recently bought a brand new 250 Pro DFC. I can get rid of a collective problem. Now, I have two other 250s flybarless but with the original longer main shaft. I love the way they fly with vbar mini. So, I setup my brand new just like the others in vstabi and same pitch and throttle curves. The problem with this one is that I have a scary collective bounce. In other words, I raise collective and achieve a stable hover. But when I change altitude I can’t control the stop. It’s as if there is a dead zone where collective has no effect. So I’m always overshooting. I’ve been playing with all sorts of settings and pitch throttle curves. Now, this heli has a low profile head meaning a shorter main shaft. The manual says to use the last hole on the servo arms but i figured that was giving me too much throw and causing the problem. I moved the ball links as far in as possible to reduce the amount of throw for the same stick travel. That didn’t help either. Giving up. Not sure if there is a setting in vstabi or a magical pitch curve.
Trex 250 Pro DFC Issues translated
Public Talk › Setups ·
Started by alparmer on 9 November 2020 21:2609.11.2020 21:26
alparmer
9 November 2020 21:2609.11.2020 21:26
RV
9 November 2020 21:3209.11.2020 21:32
Hello,
could you please check the thrust bearings? - probably a mechanical issue, i had this on another heli with the same effect you describe.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 11/09/2020 09:32PM by RV.
could you please check the thrust bearings? - probably a mechanical issue, i had this on another heli with the same effect you describe.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 11/09/2020 09:32PM by RV.
Eddi E. aus G.
10 November 2020 08:5610.11.2020 08:56
Morning,
in another thread, a customer reported similar issues but on a LOGO 200. In the end, he found that one servo was acting up, for which the VBar was compensating with the other two, to keep the model level. Than in turn affected the collective response.
Kind regards
Eddi
Born to fly ...
forced to work.
in another thread, a customer reported similar issues but on a LOGO 200. In the end, he found that one servo was acting up, for which the VBar was compensating with the other two, to keep the model level. Than in turn affected the collective response.
Kind regards
Eddi
Born to fly ...
forced to work.