← Setups

Hobbywing telemetry translated

Public Talk › Setups · Started by victor gomez on 26 January 2021 16:2226.01.2021 16:22
victor gomez 26 January 2021 16:2226.01.2021 16:22
hello I would like to know if it is possible to have Hw telemetry in Vcontrol (non touch) and update the ESC with the vbar version
Eddi E. aus G. 26 January 2021 16:4326.01.2021 16:43
Hi,

the HW telemetry App is available for the classic VBar Control, check out vstabi.info/devices and the App Store for your radio, Telemetry section.
Select there, then update via USB and VBar Control Manager.

And of course your ESC has to support it, check with HW if it's available for your ESC.

Best,

Eddi

Born to fly ...
forced to work.
victor gomez 26 January 2021 16:4826.01.2021 16:48
I already have it installed on my radio and I already update my Hw I have the cable what else is necessary to do

Thanks a lot
victor gomez 26 January 2021 16:5126.01.2021 16:51
HobbyWing Platinum Pro 130A HV V4 this is my esc
RV 26 January 2021 19:2726.01.2021 19:27
For basic Operation:
Connect Master with ESC out at the NEO, set Gov to external, program ESC for this use manually or with Programmer Box

For additional VGov:
Connect the RPM signal to RPM ath the NEO (even if Telemetry delivers!) - Set Gov to VGOV, Program ESC for this use manually or with Programmer Box

For Telemetry:
Connect the telemetry signal wire to one of our telemetry ports, load the HW App and Battery Manager App, probably enable VBar Telemetry in ESC according to HW Manuals, probably with Programmer Box

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Vinger 27 January 2021 04:1427.01.2021 04:14
Sorry for the highjack, does legacy units support HW telemetry?

Peter

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
RV 27 January 2021 08:1227.01.2021 08:12
Yes they do.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless