← Setups

Setup Procedure for Turbine FADEC Vtouch with NEO Pro

Public Talk › Setups · Started by tmpilotservices@gmail.com on 18 July 2021 20:1618.07.2021 20:16
tmpilotservices@gmail.com 18 July 2021 20:1618.07.2021 20:16
Hello,

I was wanting to find out if there is anyone who has the procedure in setting up a Turbine FADEC system on the Vtouch system?

I have looked thru Vstabi but had no luck. I just wanted to see if it can be done and if so what microcell is used if need or if anyone has any idea's.

Thanks,

Tim
Vinger 19 July 2021 06:0919.07.2021 06:09
Hi
Rainer gave me this answer in attached file here on the forum. It is actually very simple and only makes use of the MOTOR switch.

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter Attachments:
open | download - Jet start VBCt.zip (9.9 KB)
tmpilotservices@gmail.com 21 July 2021 06:5621.07.2021 06:56
Hello,

Thank you for the document. I will give it a try. The turbine I will be using is the King Tech t-45H G4 helicopter. I do have one question? Does this procedure work for the helicopter or is this for fixed wing.

Thank you

Tim
Vinger 21 July 2021 16:0421.07.2021 16:04
For any turbine as they all have similar start procedures.

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
tmpilotservices@gmail.com 21 July 2021 18:2521.07.2021 18:25
Thank you very Much!!

Tim
VStabi VStabi Pioneer of Flybarless