GlenDavis1971
17 September 2021 09:5917.09.2021 09:59
HI
I have just aquired an old Hirobo Vertol and need some help with setup on Vbar Neo and Vtouch.
The mechanics has 4 servos mounted in the centre of the model controlling both heads via a mechanical mixing system. the 4 servos are Collective(pitch), Elevator, Aileron and rudder. the swashplates are H1
I need advise on weather i set this up with standard Neo set up or do i need to use the Tandem app and How
I do have pics and manual PDF i can supply but files are 2 big to add here
Many thanks
Glen Davis
RV
17 September 2021 10:4917.09.2021 10:49
Well ... it is a H-1 Config - use standard config in NEO as this should have been done in this way ages back when the model was designed. Just watch out for "Tail" pulse and frequency, check all throws, do not exceed physical limits where you might stall.
Example:
Having collective throw set up and also applying elevator by differential collective with too less headspeed/ too short/thin blades ... in forward flight climbout the rear rotor may stall if the angles are too much then. This means ... the model drops down rear, your reaction MUST be lower collective (needs some balls ... definitely ... but i got it manged in flight) a bit and pull elevator also a bit to get the rear rotor out of the stall angle ... this is one of the reasons why i prefer a mix between differential collecitve and "real" elevator in my tandem mixer for 2 swashplates.
Keep note that on such a model yaw is done by differential aileron, also has its limits. Lower all control parts massively here.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G.
17 September 2021 12:1617.09.2021 12:16
Hi,
this one?
Crazy :-)
—Eddi
Born to fly ...
forced to work.
GlenDavis1971
17 September 2021 14:3617.09.2021 14:36
Thank you Very much
What do i set the set rotor ration to?
GlenDavis1971
17 September 2021 14:3717.09.2021 14:37
RV
17 September 2021 15:1917.09.2021 15:19
Doesnt care.
But ... Zero all tail precomp values.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
GlenDavis1971
20 March 2022 13:4220.03.2022 13:42
Can you do a trim flight ?
RV
20 March 2022 17:1620.03.2022 17:16
Yes, of course. Just as usual.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.