Setting degree of throw for all 3 banks on elevator,ailerons,rudder..do i need to setup macrocell?agility only goes down to 30..thx
Setting degree of movement on ele,ail,ruddert translated
Public Talk › Setups ·
Started by Bstr8888 on 26 April 2022 04:1126.04.2022 04:11
Bstr8888
26 April 2022 04:1126.04.2022 04:11
RV
26 April 2022 06:5226.04.2022 06:52
Please split your "old style plank flyer thoughts" from degrees/deflections and flight behaviour. We have a control loop which is controlled by stick as input (target rate) and will set the required deflection to get this rate by itself in flight. Consider also a control loop needs some reserve throw to control the rate. So - setting up angles by the books here will limit the control loop too.
So the Throw setup is - set up the complete available throw in general in the model setup and then work with the agility and other control loop parameters in each bank.
Sidenote: Changing from flybars to FBL we had the similar change to do in the heli pilots heads too ages ago ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
So the Throw setup is - set up the complete available throw in general in the model setup and then work with the agility and other control loop parameters in each bank.
Sidenote: Changing from flybars to FBL we had the similar change to do in the heli pilots heads too ages ago ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Bstr8888
29 April 2022 11:0929.04.2022 11:09
Ok thanks for your help...bud