c99hrisb
18 September 2023 06:2418.09.2023 06:24
Hello, I am building a roban 700 sea hawk where I am looking for what swash to select in the setup?
Any other advise on this model and touch setup would be nice, thanks
RV
18 September 2023 09:4518.09.2023 09:45
Just start with the Bell 429 as new model ... was also a Roban as master here.
https://www.vstabi.info/forum/read.php?10,155184
For more details we need more infos. e.g. a image of the swash with head and where you stuck in the menue exactly.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
c99hrisb
18 September 2023 15:3318.09.2023 15:33
The Bell 429 referenced has the same servo setup, just trying to figure out which is servo 1, 2, and 3 plus which swash to choose from the wizzard.
Eddi E. aus G.
18 September 2023 15:4418.09.2023 15:44
Hi,
well, in Setup, you have the connectors assigned CH1, 2, 3. Birdseye on the swash plate, this also gives you an idea which swash plate to choose.
Kind regards
Eddi
Born to fly ...
forced to work.
c99hrisb
19 September 2023 04:4619.09.2023 04:46
Hello
Can someone share their setup they used for the vbar touch to the roban 700 size helicopters
The first thing I found is that it turns ccw, ok I can deal with that, then to get the swash I had to select 135 degrees instead of 120, is that what others have found?
Also what collective pitch range have you used?
and the last question what gear ratio did you use?
Any help here would be appreciated
RV
19 September 2023 07:4619.09.2023 07:46
Setup sharing isn't useful in most cases.
Consider Roban made 2 different versions of the levers to the swash. Mine had the old ones, later they reduced throw to get a better geometry - but they reduced far too much. You have to deal with the servo hrons etc. to get a useful range then massively.
I have attached my setup from 2017 here:
https://www.vstabi.info/forum/read.php?10,155184,199601,page=4#msg-199601
But i am afraid such things won't help too much. Better walk through all items and understand them - not just copy/paste.
BTW: Double pole count and half gear ratio ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G.
19 September 2023 10:1919.09.2023 10:19
Hi,
regarding the swash plate, of course you need to know what you have (e.g. 120° or 135/140°).
If it's not in the manual, measure angles.
Usually, if you go through the setup wizard, no matter if with PC software 5.0 and up (third party radios) or VBar Control, from left to right or from top to bottom, step by step, you just look at your mechanics and make the necessary adjustments in the software, and you connect the servos where shown in the software. People tend to think too complicated :-) but we (Rainer first and foremost :-) have done that for you, and simplified as much as possible ^^
I'm not familiar with Roban mechanics, I can only give general advice.
For collective range, I'd either do what the manual suggests, or symmetrical—I have +/– 12° or thereabouts, even on my 1.8 m 10 kg BO 105.
Of course, there may be mechanical limitations (physical swash plate range, geometry).
Kind regards
Eddi
Born to fly ...
forced to work.