← Setups

AR setting translated

Public Talk › Setups · Started by Medic on 24 October 2023 21:4424.10.2023 21:44
Medic 24 October 2023 21:4424.10.2023 21:44
I have set bank 4 to AR.
Activated by safety and motor idle switch.
I assume this is used for practicing AR (?)
What values are you putting in those parameters in bank 4 for AR?
RV 24 October 2023 22:1424.10.2023 22:14
To be honest:

i personally don't use Bank4. As i have set up all collective in a useful range - AR is done in the bank where i am currently flying.

But - if recommendation required - i would use lower rates and gains.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 27 October 2023 09:3327.10.2023 09:33
Hi,

some people like to adjust their collective curves, for autorotation.
Mainly if they have already set up curves differing from the standard diagonal –100...0...+100 (or e.g. –12°...0°...+12°).

I don't use it, either, but if, as Rainer states, making the model less agile might help conserving energy when you have one shot only at the autorotation after all. Since we also have a quick spool-up (from Motor switch Idle to Run), you can quite safely abort autorotations anyway.

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless