Bernd S.
20 February 2026 06:0520.02.2026 06:05
My question is similar to that of linken98 - namely combining new systems with old ones.
I am currently still flying (and would like to keep it that way) my Logo 600 series (SE&SX).
Both run on Multiplex receivers which control the VBars via a sum signal.
Everything has been running smoothly and perfectly for years & never change a running system!?
The idea is now to switch the transmitter and the stabilizer to the existing V-Control EVO.
Primarily because of the rescue function (and slower switch to V-Control).
The question now is: Can the current stabilizers also work with the rather old controller, including the controller telemetry?
The controller is a Kontronik Heli-Jive 120 from 2013 - it got a J-Log - and I still have a J-Log3 lying around.
Servos shouldn't be a problem - they're listed as: Futaba BLS 251 and for the tail, also Futaba, one of the typical tail servos of this class (number not currently available).
So, old VBar out (in this case Blueline with external sensor V5.3xPro) and new one in:
https://shop.mikado-heli.de/VBar-VBar-Elektronik/VBar-Flybarless-und-Empfaenger/VBar-EVO/VBar-EVO-Alu-Gehaeuse-rot-VLink-7-x-Express.htm?a=article&ProdNr=05572&p=1011 Then bring the new version to 8.x Pro with recovery and integrate it with V-Control?
So my main question is whether I can then use the Heli-Jive including controller telemetry (of course the app for it on the V-Control which I have already installed).
So, in theory, it shouldn't be too difficult?
But there's no rush for now - it's still indoor season and I'm sure I have enough playing time with the Logo200.
Greetings Bernd
Meine Frage ist ähnlich die von linken98 - sprich neue Systeme mit altem kombinieren.
Ich fliege derzeit noch ( und das soll auch gerne so bleiben ) meine Logo 600er ( SE&SX ).
Beide laufen an Multiplex Empfängern welche die V-Stabis per Summensignal steuern.
Alles läuft seit Jahren sauber und perfekt & never change a running System !?
Idee ist nun den Sender und das Stabi zu wechseln auf den nun vorhandenen V-Control EVO.
In erster Linie eher wegen der Rettungsfunktion ( und langsamer Wechsel auf V-Control ).
Frage nun: Können die aktuellen Stabis auch den nun durchaus alten Regler incl. Reglertelemetrie ?
Regler ist ein Kontronik Heli-Jive 120 von 2013 - der bekam ein J-Log - und ich habe noch einen J-Log3 liegen.
Servos sollten kein Problem sein - sind in den Listen : Futaba BLS 251 und Heck auch Futaba eines der typ. Heckservos der Klasse ( Nr. grad nicht zur Hand ).
Also altes V-Stabi raus ( in dem Fall Blueline mit ext. Sensor V5.3xPro ) und Neues rein:
https://shop.mikado-heli.de/VBar-VStabi-Elektronik/VStabi-Flybarless-und-Empfaenger/VStabi-EVO/VStabi-EVO-Alu-Gehaeuse-rot-VLink-7-x-Express.htm?a=article&ProdNr=05572&p=1011
Dann das Neue auf 8.x Pro mit Rettung bringen und das mit dem V-Control verheiraten ?
Frage also hauptsächlich ob ich dann den Heli-Jive incl. Reglertelemetrie nutzen kann ( natürlich die App dafür auf den V-Control was ich schon installiert habe ).
So in der Phantasie sollte das kein großer Aufwand sein ?
Das hat aber erst einmal keine Eile - noch ist Hallenzeit und ich habe mit dem Logo200 sicher genug Spielzeit.
Grüße Bernd
RV
20 February 2026 06:4620.02.2026 06:46
If you're already making modifications, please also install a modern controller and retire the Heli-Jive.
It doesn't have telemetry for us as far as I know (ask Kontronik), and even if it did, the question would be whether Kontronik's external Tel-Me still exists (AFAIK no, ask Kontronik) - moreover, it's then not configurable, etc.
So please install a modern speed controller (YGE, Scorpion, Hobbywing, ZTW). You can program it with one click in the VBC and you're done!
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 20.02.2026 06:47 von RV.
Wenn Du schon umbaust - baue auch bitte einen zeitgemäßen Regler ein und schick den Heli-Jive in Rente.
Der hat keine Telemetrie für uns soweit ich weiß (Kontronik fragen), und wenn er es hätte wäre die Frage ob es überhaupt noch das externe Tel-Me von Kontronik gibt (AFAIK nein, Kontronik fragen) - zudem ist er dann nicht einstellbar usw.
Also - Bau bitte einen zeitgemäßen Regler ein (YGE, Scorpion, Hobbywing, ZTW). Die kannst Du mit einem Klick in der VBC dann proggen und fertig!
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 20.02.2026 06:47 von RV.
Bernd S.
20 February 2026 11:3520.02.2026 11:35
Hello Rainer - you've catapulted me 100% into the present!
Okay, I'll take a look at that... .
J-Log could be the bridge for the old crutch :-/ .
Bernd
Hallo Rainer - Ihr katapultiert mich ja gleich 100% in die Gegenwart !
Ok, ich schaue mir das an... .
J-Log könnte sein die Brücke für die alte Krücke :-/ .
Bernd
RV
20 February 2026 11:4420.02.2026 11:44
Absolutely not. J-Log isn't telemetry in the true sense of the word. It's useless to you here.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Garantiert nicht. J-Log ist keine Telemetrie im Sinne des Begriffes. Nutz Dir nix bei uns.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Bernd S.
20 February 2026 11:4820.02.2026 11:48
J-Log is currently the interface to M-Link - okay, it's all old stuff too :-)
J-Log ist das Interface zu M-Link aktuell - ok, auch halt alles alter Kram :-)
Eddi E. aus G.
20 February 2026 12:1920.02.2026 12:19
Haha (sorry ... :-) ) ...
Harnesses also made horses and horse-drawn carriages compatible, back when that was the thing ^^
There are still use cases today, but the world has indeed moved on, and we prefer to look to the future, live in the present, and at most reminisce about old times every now and then around the campfire (or on the gossip bench...).
You know what?
—Yes, that was already the case... :-)
:-) But it worked.
— :-) when I think about how complicated it all was...
<ding — :-) >
Grüßle
Eddi
Born to fly ...
forced to work.
Haha (sorry ... :-) ) ...
Auch Geschirr hat Pferde und Pferdekutschen kompatibel gemacht, als das aktuell war ^^
Gibt auch heute noch Anwendungsfälle, aber die Welt hat sich tatsächlich weiter gedreht, und wir orientieren uns lieber nach vorn, leben in der Gegenwart, und reminiszieren höchstes ab und zu am Lagerfeuer (oder auf der Lästerbank ...) über alte Zeiten ^^
Weißt Du noch?
—Ja das war schon so ... :-)
:-) Hat aber funktioniert.
— :-) wenn ich noch dran denke, wie kompliziert das alles war ...
<kling — :-) >
Grüßle
Eddi
Born to fly ...
forced to work.
Bernd S.
20 February 2026 12:4720.02.2026 12:47
Horse-drawn carriages and my 2013 helicopters still work!
(I know, 3D helicopters and indoor shock planes that have been flown for more than 2 years have been handled too gently :-) )
Everything's okay - I'll continue to develop myself in the here and now!
:-) - just put a bock beer out in the snow to cool down!
Edited once. Last edited on 20.02.2026 at 12:48 by Bernd S.
Pferdekutschen sowie meine 2013er Helis funktionieren weiterhin !
( Ich weis, 3D Helis und Indoor-Shockys die länger als 2 Jahre geflogen werden wurden zu sanft bewegt :-) )
Alles ok - ich werde mich ins hier und jetzt weiterentwickeln !
:-) - grad nen Bockbier draußen in den Schnee zur Kühlung gestellt !
1 mal bearbeitet. Zuletzt am 20.02.2026 12:48 von Bernd S..
Bernd S.
23 February 2026 07:1223.02.2026 07:12
RV wrote:
-------------------------------------------------------
If you're already renovating, please also build one.
> insert a modern controller and send the Heli-Jive
> retired.
Hi, since I recently bought a YGE for a fixed-wing aircraft and I like it a lot
(and programming interface available):
What kind of ESC, for example a YGE, would you recommend for a 600SX with a Pyro 700 on 10S?
(I'm taking the liberty of building on your experience)
Have a great start to the week!
Bernd
RV schrieb:
-------------------------------------------------------
> Wenn Du schon umbaust - baue auch bitte einen
> zeitgemäßen Regler ein und schick den Heli-Jive
> in Rente.
Moin, da ich letzt auch einen YGE mir für nen Flächenflieger zulegte und mir Der gut gefällt
( und Proginterface vorhanden ) :
Was für einen z.B. YGE Regler könnte man da für nen 600SX mit Pyro 700 an 10S empfehlen ?
( Ich bin mal so frei auf Eure Erfahrung zu bauen )
Erst mal schönen Wochenstart !
Bernd
Eddi E. aus G.
23 February 2026 10:1023.02.2026 10:10
Good morning,
We used to fly the 10s class with a Beat or Jive 80 :-) (nominally 80 A duration, back then still plenty of reserve for peaks).
Looking at YGE's current portfolio, the Aureus 105 HV would be more than sufficient.
If you don't yet know where the journey will lead, perhaps the 135 is a good choice, which in my opinion is also suitable for a 700.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
die 10s-Klasse sind wir 'früher' mit einem Beat oder Jive 80 geflogen :-) (nominal 80 A Dauer, damals noch ordentlich Reserve für Peaks).
Wenn ich mir das aktuelle Portfolio von YGE anschaue, würde der Aureus 105 HV locker reichen.
Wenn man noch nicht weiß, wo die Reise hingehen wird, vielleicht gleich der 135-er, der ist dann mMn auch für einen 700-er gut.
Grüßle
Eddi
Born to fly ...
forced to work.
Bernd S.
23 February 2026 14:5023.02.2026 14:50
:-) I even have an Aureus 135 HV here - it was ACTUALLY supposed to go in the Extra 300NG/2m.
So doors open without breaking the bank.
I think I'm slowly starting to have a plan for spring 8-)
:-) nen Aureus 135 HV habe ich sogar hier - sollte EIGENTLICH in die Extra 300NG/2m.
Also tun sich Türen auf ohne die Finanzen zu sprengen.
Ich glaube für das Frühjahr habe ich langsam einen Plan 8-)
Bernd S.
2 March 2026 19:4302.03.2026 19:43
I flew the 600SX again on Sunday - what speaks against any modification is that it flies absolutely precisely and cleanly - it is a 13-year-old model - but it has a VBar (SilverLine).
:-/ Too good to modify?
But we're waiting for the new 700 – the trend is towards the 4th Mikado helicopter :-) ?
Sonntag mal den 600SX wieder geflogen - was gegen jeden Umbau spricht ist das der absolut präzise und sauber fliegt - es ist zwar ein 13J alter - aber halt ein V-Stabi ( SilverLine ).
:-/ zu schade um Ihn umzubauen ?
Doch auf den neuen 700er warten - Trend geht zum 4. Mikadoheli :-) ?
Eddi E. aus G.
4 March 2026 09:1204.03.2026 09:12
Hi Bernd,
Unless there's a specific reason to modify it, I'd probably just keep flying the helicopter.
Sure, you could swap the Silverline for an EVO, it's a matter of fifteen minutes ;-) Just peel it off, swap it, stick it back on, load the 600 SX setup. Everything else too, of course: 12V setup, modern controller – in our hobby, there are practically no limits to the madness ^^
The trend is definitely towards the Viertheli :-)
—Eddi
Born to fly ...
forced to work.
Moin Bernd,
solange es keinen besonderen Grund gibt, umzubauen, würde ich den Heli vermutlich einfach weiterfliegen.
Klar könnte man die Silverline auch gegen eine EVO tauschen, ist 'ne Sache von 'ner Viertelstunde ;-) abknibbeln, umstecken, festkleben, 600 SX-Setup laden. Alles weitere natürlich auch, 12 V-Setup, moderner Regler, in unserem Hobby sind dem Wahnsinn ja kaum Grenzen gesetzt ^^
Der Trend geht definitiv zum Viertheli :-)
—Eddi
Born to fly ...
forced to work.
Bernd S.
5 March 2026 06:3305.03.2026 06:33
Hi Eddi,
Exactly, but since I've "always" used battery telemetry, the controller also needs to be replaced.
So, in reality, with pros and cons, everything together comes to around €800 :-) .
The MTF time is already borderline for the Logo 600SX.
We're looking – if it's a brand new helicopter, then it would be my 5th helicopter – and 4th Mikado helicopter – I also have a Blade MCX :-) (Does that even count?)
I got new batteries for the mcpx and cleaned the potentiometers - it's the "I don't give a damn" helicopter that's so nervous it trains your reflexes - like a reflex simulator.
First, use what you have - including the 10S setups (which, like Kontronik equipment, were standard at Mikado back then).
But Mikado also wants to sell :-) - that's clear - but then for me it would be more the 2026 700 - and that's still a long way off from the shop and my wallet, and more of a luxury problem - I'm just curious about the rescue system (because I still occasionally get confused about hairy things (it's all in my head)) - the rescue system for the Logo 200 hardly makes sense for me - it's too fast and too deep if something happens.
Greetings !
Bernd
Hallo Eddi,
eben, aber da ich Akkutelemetrie schon "immer" nutze muss halt der Regler auch neu.
Sind real dann mit Pro&Rettung alles zusammen doch um und bei 800€ :-) .
MTF-Zeit ist beim Logo 600SX auch schon grenzwertig.
Wir schauen - wenn ganz neuer Heli dann wäre es ist aber dann mein 5. Heli - und 4. Mikadoheli - ich habe noch einen Blade mcpx :-) ( gilt Der überhaupt ? )
Für den mcpx noch mal neue Akkus geholt und Potis gereinigt - das ist der Scheißegalheli der zudem so nervös ist das Der Reflexe trainiert - sozusagen wie der Reflex-Simulator.
Erst mal nutzen was man hat - incl. der 10S Setups ( die damals wie auch Kontronikzeug bei Mikado mal Standard waren ).
Aber Mikado will auch verkaufen :-) - ist auch klar - dann aber für mich eher den 2026er 700er - und das ist von Shop und meinem Portemonnaie noch Zukunftsmusik und eher Luxusproblem - ich bin erst mal neugierig auf die Rettung ( weil ich mich doch ab und zu noch verhaspel bei haarigen Dingen ( Kopfsache ) ) - beim Logo 200 macht die Rettung für mich kaum Sinn - das ist zu schnell und zu tief wenn was passiert.
Grüße !
Bernd
Bernd S.
11 March 2026 20:3211.03.2026 20:32
Good morning,
The decision has been made:
Logo 600SE (2012 model) currently equipped with MiniVBar Blueline will receive a new EVO with V8.x and rescue system, and in connection with that, a YGE Aureus 135 airfoil, and will then be flown with VBar-Control in the future.
Rather oversized (controller), who knows what the future holds.
Topic therefore "closed" - there will only be possible completion photos when this is finished.
Thanks for the information.
Bernd
Moin,
Entscheidung ist gefallen:
Logo 600SE ( 2012er ) mit derzeit MiniVStabi Blueline bekommt neues EVO mit V8.x und Rettung und in dem Zusammenhang nen YGE Aureus 135 und wird dann zukünftig mit VBar-Control geflogen.
Eher überdimensioniert ( Regler ) wer weis was die Zukunft bringt.
Topic daher "geschlossen" - gibt nur evt. Vollzugsbilder wenn das fertig ist.
Danke für die Infos
Bernd