linken98
19 February 2026 19:2119.02.2026 19:21
Hello, I currently have the old VBar Classic and am considering getting a new one. Can I transfer the models or do I have to reconfigure everything for the helicopters? Besides the features, do I have any flying advantages with the newer models?
Best regards
Halllo, hab mom noch die alte vbar classic, bin am überlegen eine neue zu holen, kann man die Modelle übernehmen oder muss ich alles neu einstellen bei den helis? Hab ich beim Fliegen einen Vorteil bei den neueren Modellen außer den Funktionen?
Glg
RV
19 February 2026 19:5819.02.2026 19:58
So... everything concerning the models is stored in the models' stabilizers.
With the new transmitter, you must of course:
- Set up switches, stick mode, etc.
- Install required apps (battery log, controller, etc.)
- If necessary, re-add the batteries (check the current capacities on the old VBC)
Alternatively, copy the /batteries folder from the old VBC to the new one via USB ;-)
The EVO is faster in booting and operation and can also be equipped/ordered with digital joysticks and the multi-region radio module. The Touch version cannot.
Otherwise, the range of functions is the same.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Also ... alles was die Modelle betrifft ist in den Stabis der Modelle gespeichert.
Mit dem neuen Sender musst Du natürlich:
- Schalter, Stickmode etc. einrichten
- benötigte Apps (Akku Logbuch, Regler usw) installieren
- ggf. Akkus dann neu anlegen (Schau da mal nach den aktuellen Kapazitäten auf der alten VBC)
Alternativ den Ordner /batteries von der alten auf die neue VBC per USB kopieren ;-)
Die EVO ist beim Booten und Bedienen was flotter und kann auch mit digitalen Knüppeln sowie dem Multi region Funkmodul ausgerüstet / bestellt werden. Die touch nicht.
Ansonsten ist der Funktionsumfang gleich.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.