← VBar Control Classic

Personalize translated

VBar Control › VBar Control Classic · Started by Bernd S. on 18 February 2026 20:0618.02.2026 20:06
Bernd S. 18 February 2026 20:0618.02.2026 20:06
Hi, how complicated is it to replace the "V" on the transmitter?
(and potentiometer knobs / joysticks -> https://shop.mikado-heli.de/VBar-VBar-Elektronik/VBar-Control-Zubehoer/Individualisierung/Knueppel-Drehknopf-Set-rot-metallic.htm?a=article&ProdNr=05372&p=8398 )

I haven't found anything in the downloadable data yet.
The set is available from a Mikado dealer (hit your fingers)

Greetings Bernd (still waiting for his V-Control)
machine-translated from German · Show original
RV 18 February 2026 20:3718.02.2026 20:37
The "V" is a plotter film for sticking on - you don't need to open anything.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Bernd S. 19 February 2026 05:1119.02.2026 05:11
Okay, that sounds easy - let's see...
machine-translated from German · Show original
Eddi E. aus G. 19 February 2026 08:5219.02.2026 08:52
Good morning,

When peeling and removing the film, take your time to avoid scratching the V, in case you ever go topless... :-)

And don't 'push like a bull' :-) the plastic V is a press fit in the housing, which is normally very tight, but I have also seen Vs that have been pushed in (you can then push them back into position from the inside).

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 19 February 2026 19:4019.02.2026 19:40
The transmitter has arrived - initial flight tests have been done - some familiarization is needed - it already looks nice, but I will then order the personalization and carefully peel it off - the eye is also important.

But first, I need to familiarize myself with the station itself.

Thanks for all the tips!

Bernd
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless