← VBar Control Classic

vbar control and yge app (controller YGE Aureus 185) translated

VBar Control › VBar Control Classic · Started by linken98 on 22 January 2026 18:3422.01.2026 18:34
linken98 22 January 2026 18:3422.01.2026 18:34
Hello,

Yeah, I have a lot of questions at the moment, I want to get back into it, I'm going to get the VBar Evo and the YGE Aureus 185 with the VBar adapter. I read that everything can then be set up via the app, it recognizes the controller automatically. (https://www.youtube.com/watch?v=kzVh4nPjDrA)
Can I skip the last two steps in the PC software, i.e., controller 1 and controller 2?

Thank you in advance.
machine-translated from German · Show original
RV 22 January 2026 19:3522.01.2026 19:35
I assume you have a Vbar Control.

Then you don't use any PC software at all – you do everything with the VBC. The setup is performed much more precisely there.

If the controller is already connected, you will be prompted to select (attach) the battery, and then the controller will be configured in the model setup. If necessary, you may need to adjust the rotation direction and BEC voltage in the controller setup of the YGE app afterward. That's it!

PC is a last resort for aircraft using foreign transmitters.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
linken98 22 January 2026 19:4522.01.2026 19:45
I'm still used to this from back then. OK, thanks.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless