← VBar Control Classic

Vbar classic and vstabi evo translated

VBar Control › VBar Control Classic · Started by linken98 on 20 January 2026 12:4420.01.2026 12:44
linken98 20 January 2026 12:4420.01.2026 12:44
Hi, I'm planning to get a new helicopter and use my VBar Control Classic and VBar Evo. Is there anything I need to be aware of, and will they work together? Thanks so much!
machine-translated from German · Show original
Eddi E. aus G. 20 January 2026 13:2120.01.2026 13:21
Hi,

It works up to version 7 of the VBar firmware.

A version 8 that is already configured for flight could still be bound and flown, but it can no longer be configured with the Classic version.

But since you can choose to install either V7 or V8, it's basically not a problem.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
linken98 20 January 2026 14:0320.01.2026 14:03
Thanks, then I'll take this one: https://shop.mikado-heli.de/VBar-Elektronik/VBar-Flybarless-und-Empfaenger/VBar-EVO/VBar-EVO-neon-gelb-VLink-7-x-Express.htm?a=article&ProdNr=05582&p=1011 and can still adjust everything as long as I don't update it?

Greetings from Tyrol
machine-translated from German · Show original
ulrich 20 January 2026 14:1120.01.2026 14:11
You can update them if necessary. V7 and V8 are two different versions, both available as options. Both versions receive updates when updates are available.

So long... Uli
http://www.vstabi.de
machine-translated from German · Show original
Eddi E. aus G. 20 January 2026 15:0020.01.2026 15:00
And... the Pro or Pro+Rescue upgrade also includes both versions.
So if a Touch or EVO/+ is later on your wish list, you don't have to buy anything new, you can install the other version if you want, the setup will be switched automatically, pre-flight check, and off you go.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless