Hello,
This morning after breakfast I wanted to update my VBar EVO from V7 to V8.
I successfully flew my new Nimbus 550 V2 with V7 a few days ago and now wanted to update to V8 and try something out this afternoon.
Unfortunately, nothing works anymore, neither with the V7 nor with the V8.
I connected the VBar to a battery to save the V7 setup, and that worked.
I then started the update to V8 by scanning the QR code in the EVO Updater and activating the app.
That worked without any problems.
After the update, a pop-up appeared on the VBar Touch: "The module for VBar EVO V8 is not installed and activated. Network availability is required for installation."
The only option offered to me was/is "remove". See image "01".
On the channel itself, the options for loading the apps are displayed strangely and look cut off.
See image "02".
In picture "03" you can see that the APP EVO V7 Pro add-on is activated, but here too the symbols overlap strangely.
Image "04" shows that other apps such as "Multikopter" are displayed normally and I could also install them.
When I turn on the helicopter or connect a battery to the EVO, after a few seconds the following pop-up appears: "The module for VBar EVO V8 is not installed and activated. Network availability is required for installation." (See image "04").
I ran the VControl Update Manager several times, hoping that the problem would be solved.
(See image "05".
Then I desperately tried to salvage Sunday and simply go back to the V7 to make it to the airfield today.
I had to repeatedly click away the pop-up and then quickly navigate to the VBar Neo/Evo Updater menu item to reinstall V7.
Unfortunately, after updating to V7, the following pop-up appeared: "The module for VBar EVO V7 is not installed and activated. Network availability is required for installation."
It even shows me that it's "Active". "Image "06", there seems to be a problem here, I would really appreciate some help.
When I look at the whole thing in the browser on my iPhone, it currently looks like this (Image "07").
So, apart from the basic app "Vsabi EVO V8 Pro Setup", it's actually quite good.
It would be great if someone could solve my problem or give me some help on how to get it under control again.
Best regards and have a nice Sunday,
David
This morning after breakfast I wanted to update my VBar EVO from V7 to V8.
I successfully flew my new Nimbus 550 V2 with V7 a few days ago and now wanted to update to V8 and try something out this afternoon.
Unfortunately, nothing works anymore, neither with the V7 nor with the V8.
I connected the VBar to a battery to save the V7 setup, and that worked.
I then started the update to V8 by scanning the QR code in the EVO Updater and activating the app.
That worked without any problems.
After the update, a pop-up appeared on the VBar Touch: "The module for VBar EVO V8 is not installed and activated. Network availability is required for installation."
The only option offered to me was/is "remove". See image "01".
On the channel itself, the options for loading the apps are displayed strangely and look cut off.
See image "02".
In picture "03" you can see that the APP EVO V7 Pro add-on is activated, but here too the symbols overlap strangely.
Image "04" shows that other apps such as "Multikopter" are displayed normally and I could also install them.
When I turn on the helicopter or connect a battery to the EVO, after a few seconds the following pop-up appears: "The module for VBar EVO V8 is not installed and activated. Network availability is required for installation." (See image "04").
I ran the VControl Update Manager several times, hoping that the problem would be solved.
(See image "05".
Then I desperately tried to salvage Sunday and simply go back to the V7 to make it to the airfield today.
I had to repeatedly click away the pop-up and then quickly navigate to the VBar Neo/Evo Updater menu item to reinstall V7.
Unfortunately, after updating to V7, the following pop-up appeared: "The module for VBar EVO V7 is not installed and activated. Network availability is required for installation."
It even shows me that it's "Active". "Image "06", there seems to be a problem here, I would really appreciate some help.
When I look at the whole thing in the browser on my iPhone, it currently looks like this (Image "07").
So, apart from the basic app "Vsabi EVO V8 Pro Setup", it's actually quite good.
It would be great if someone could solve my problem or give me some help on how to get it under control again.
Best regards and have a nice Sunday,
David
Hallo,
ich wollte heute Morgen nach dem Frühstück mein VStabi EVO von V7 auf V8 updaten.
Ich hatte meinen neuen Nimbus 550 V2 vor ein paar Tagen erfolgreich mit V7 eingeflogen und wollte nun auf V8 updaten und heute Mittag etwas probieren gehen.
Leider geht jetzt gar nichts mehr, weder mit der V7, noch mit der V8.
Ich habe das VStabi mit einem Akku verbunden, um noch das V7 Setup zu speichern, das hat auch geklappt.
Anschließend habe ich das Update auf V8 gestartet, indem ich beim EVO Updater den QR Code gescannt habe und die APP aktiviert habe.
Das hat auch Problemlos funktioniert.
Nach dem Update, kam ein Pop-Up auf der VBar Touch "Das Modul für VStabi EVO V8 ist nicht installiert und aktiviert. Zum Installieren ist Netzwerk Verfügbarkeit erforderlich".
Die einzige Option die mir angeboten wurde war/ist "entfernen" Siehe Bild "01"
Im Sender selbst, werden mir die Optionen zum Laden der Apps komisch angezeigt und sehen so abgeschnitten aus.
Siehe Bild "02".
Auf Bild "03" sieht man das die APP EVO V7 Pro Zusatz zwar aktiviert ist, aber auch hier die Symbole komisch überlappen.
Auf Bild "04" sieht man, dass andere Apps wie z.B. "Multikopter" normal dargestellt werden und ich diese auch installieren könnte.
Wenn ich den Heli einschalte bzw. einen Akku an das EVO anschließe erscheint nach ein paar Sekunden das Pop-Up ""Das Modul für VStabi EVO V8 ist nicht installiert und aktiviert. Zum Installieren ist Netzwerk Verfügbarkeit erforderlich". (Siehe Bild "04".
Den VControl Update Manager habe ich mehrfach laufen lassen, in der Hoffnung, das sich das Problem löst.
(Siehe Bild "05".
Dann habe ich verzweifelt versucht den Sonntag noch zu retten und einfach wieder auf die V7 zurück zu gehen um es heute noch auf dem Flugplatz zu schaffen.
Ich musste dazu das Pop-Up immer wieder weg klicken und dann schnell zum Menü Punkt VStabi Neo/Evo Updater navigieren, um die V7 wieder aufzuspielen.
Leider kam nach dem Update auf die V7 folgendes Pop-Up "Das Modul für VStabi EVO V7 ist nicht installiert und aktiviert. Zum Installieren ist Netzwerk Verfügbarkeit erforderlich".
Hier wird mir sogar angezeigt, dass es "Aktiv" ist. "Bild "06", scheinbar ist hier der Wurm drin, würde mich sehr über Hilfe freuen.
Wenn ich mir das ganze im Browser auf dem iPhone anschaue, sieht es aktuell so aus Bild "07"
Also bis auf die Basis App "Vsabi EVO V8 Pro Setup" eigentlich ganz gut.
Wäre super wenn jemand mein Problem lösen könnte bzw. mir Hilfestellung geben könnte, wie ich das wieder in den Griff bekomme.
Viele Grüße und einen schönen Sonntag,
David
ich wollte heute Morgen nach dem Frühstück mein VStabi EVO von V7 auf V8 updaten.
Ich hatte meinen neuen Nimbus 550 V2 vor ein paar Tagen erfolgreich mit V7 eingeflogen und wollte nun auf V8 updaten und heute Mittag etwas probieren gehen.
Leider geht jetzt gar nichts mehr, weder mit der V7, noch mit der V8.
Ich habe das VStabi mit einem Akku verbunden, um noch das V7 Setup zu speichern, das hat auch geklappt.
Anschließend habe ich das Update auf V8 gestartet, indem ich beim EVO Updater den QR Code gescannt habe und die APP aktiviert habe.
Das hat auch Problemlos funktioniert.
Nach dem Update, kam ein Pop-Up auf der VBar Touch "Das Modul für VStabi EVO V8 ist nicht installiert und aktiviert. Zum Installieren ist Netzwerk Verfügbarkeit erforderlich".
Die einzige Option die mir angeboten wurde war/ist "entfernen" Siehe Bild "01"
Im Sender selbst, werden mir die Optionen zum Laden der Apps komisch angezeigt und sehen so abgeschnitten aus.
Siehe Bild "02".
Auf Bild "03" sieht man das die APP EVO V7 Pro Zusatz zwar aktiviert ist, aber auch hier die Symbole komisch überlappen.
Auf Bild "04" sieht man, dass andere Apps wie z.B. "Multikopter" normal dargestellt werden und ich diese auch installieren könnte.
Wenn ich den Heli einschalte bzw. einen Akku an das EVO anschließe erscheint nach ein paar Sekunden das Pop-Up ""Das Modul für VStabi EVO V8 ist nicht installiert und aktiviert. Zum Installieren ist Netzwerk Verfügbarkeit erforderlich". (Siehe Bild "04".
Den VControl Update Manager habe ich mehrfach laufen lassen, in der Hoffnung, das sich das Problem löst.
(Siehe Bild "05".
Dann habe ich verzweifelt versucht den Sonntag noch zu retten und einfach wieder auf die V7 zurück zu gehen um es heute noch auf dem Flugplatz zu schaffen.
Ich musste dazu das Pop-Up immer wieder weg klicken und dann schnell zum Menü Punkt VStabi Neo/Evo Updater navigieren, um die V7 wieder aufzuspielen.
Leider kam nach dem Update auf die V7 folgendes Pop-Up "Das Modul für VStabi EVO V7 ist nicht installiert und aktiviert. Zum Installieren ist Netzwerk Verfügbarkeit erforderlich".
Hier wird mir sogar angezeigt, dass es "Aktiv" ist. "Bild "06", scheinbar ist hier der Wurm drin, würde mich sehr über Hilfe freuen.
Wenn ich mir das ganze im Browser auf dem iPhone anschaue, sieht es aktuell so aus Bild "07"
Also bis auf die Basis App "Vsabi EVO V8 Pro Setup" eigentlich ganz gut.
Wäre super wenn jemand mein Problem lösen könnte bzw. mir Hilfestellung geben könnte, wie ich das wieder in den Griff bekomme.
Viele Grüße und einen schönen Sonntag,
David
machine-translated from German · Show original