← Logo 400 ... 690

Logo 600 servo mounting translated

Mikado Model Helicopters › Logo 400 ... 690 · Started by maurice.krause on 25 April 2025 13:3625.04.2025 13:36
maurice.krause 25 April 2025 13:3625.04.2025 13:36
Hello everyone,

I switched from my Savöx 1258TG servos to Savöx 2271 servos because of the high voltage (HV) feature. Now my problem is that I can't tighten these servos properly anymore, obviously because the sheet metal screws have already screwed into the plastic. Is there any way to tighten them properly again? Loctite?

Greetings
Maurice
machine-translated from German · Show original
RV 26 April 2025 07:4326.04.2025 07:43
What kind of screws do you have? Hex socket or Phillips head?

In my experience, I can reuse the holes several times.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
maurice.krause 26 April 2025 09:0926.04.2025 09:09
I have the Phillips head screws supplied by Savöx; I couldn't find the Allen screws from the kit.

Greetings
Maurice
machine-translated from German · Show original
RV 26 April 2025 19:0826.04.2025 19:08
Hmm... are those the slightly tapered ones? Could you measure the inner diameter just before the shaft, and the outer diameter as well?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
maurice.krause 27 April 2025 08:5627.04.2025 08:56
Hi Rainer,

Approx. 2.9 mm shaft diameter

approx. 5.5–6 mm head diameter

The problem has been solved, though; we had some thicker screws from our model crane project, so now the servo is really secure and we can start testing today :-)

Greetings
Maurice
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless