maurice.krause
24 May 2025 17:1224.05.2025 17:12
Hello everyone,
Unfortunately, I couldn't find any precise information regarding the maximum length of the tail rotor blades for the Logo 600. I still have the problem that my tail spins out when I adjust the pitch, no matter what I set; nothing really changes. Furthermore, in certain maneuvers with pitch/yaw combinations, the tail sometimes seems to stand still.
My suspicion is that the 95mm Azure Blades on the tail rotor aren't generating enough power; could I, for example, simply try 105mm blades?
Greetings
Maurice
Hallo zusammen,
ich konnte leider keine genauen Angaben bzgl. der maximalen Länge der Heckrotorblätter für den Logo 600 finden, ich habe immernoch das Problem, das mein Heck sich wegdreht bei pitch, egal was ich einstelle, es ändert sich eigentlich nichts, zumal auch in bestimmten manövern mit Pitch / Gier kombinationen das Heck manchmal wie stehen bleibt.
Meine Vermutung, die 95er Azure Blades am Heckrotor erzeugen nicht genug Kraft, kann ich bspw. einfach mal 105er probieren?
Grüße
Maurice
Bernhard Kerscher
26 May 2025 08:3826.05.2025 08:38
Hello Maurice,
Please check the following: hold the rotor head firmly and try to turn the tail rotor head.
I hope nothing rotates here and slips under load.
This can happen if, for example, the pin in the rear belt pulley is missing or has slipped.
Or the pulley at the front is broken and the drive pin is spinning freely.
If it's a genuine L600 with an aluminum pulley, that's rather unlikely.
But please take a close look at the belt drive.
Also the clamping screw from the rear hub.
Greetings Bernhard
Hallo Maurice,
kontrolliere bitte mal folgendes, halte den Rotorkopf fest und versuche am Heckrotorkopf zu drehen.
Nicht das sich hier etwas dreht und unter Last durch rutscht.
Das kann passieren wenn z.B. der Stift im Heckriemenrad fehlt oder durchgedreht ist.
Oder das Riemenrad vorne gebrochen ist und der Mitnahmestift sich durch dreht.
Wenn das ein echter L600 ist mit Alu Riemenrad eher unwahrscheinlich.
Aber schau dir den Riementrieb mal genau an bitte.
Auch die Klemmschraube von der Hecknabe.
Grüße Bernhard
maurice.krause
26 May 2025 18:1626.05.2025 18:16
Hi Bernhard,
First of all, thank you for the answer.
I just checked it, everything's fine, the helicopter has maybe been flown 5 times, the kit is about 1 year old, it's the Logo 600 (aluminum head), I don't know if you thought it was the Logo 600 3D.
Greetings
Maurice
Hi Bernhard,
erstmal, danke für die Antwort.
Ich habe es eben geprüft, alles gut, der Heli wurde vielleicht 5 mal geflogen, baukasten ist ca. 1 Jahr alt, es ist der Logo 600 (Alu Kopf), weiß nicht ob du dachtest es wäre der Logo 600 3D.
Grüße
Maurice
Bernhard Kerscher
27 May 2025 08:5927.05.2025 08:59
Good morning,
No, I just wanted to know if it's the L600 with an aluminum head and therefore an aluminum pulley, or the 600 SX with a plastic pulley.
But you've already answered that.
Greetings Bernhard
Edited once. Last edited on 27.05.2025 at 08:59 by Bernhard Kerscher.
Guten Morgen,
nein ich wollte nur wissen ob es der L600 mit Alu Kopf und somit Alu Riemenrad ist oder der 600 SX mit Kunststoff Riemenrad.
Aber das hast schon beantwortet.
Grüße Bernhard
1 mal bearbeitet. Zuletzt am 27.05.2025 08:59 von Bernhard Kerscher.
maurice.krause
29 May 2025 07:2929.05.2025 07:29
Hello again everyone,
What's the maximum length now? I still have the Rotortech propellers from my 700 lying around here; they're 105mm. Can I just screw them onto the 600?
Happy holiday to you all!
Greetings
Maurice
Hallo nochmal zusammen,
was ist denn jetzt die maximale Länge? Ich hab noch die Rotortech von meinem 700er hier rum liegen, das sind 105er, kann ich die einfach mal an den 600er schrauben?
Euch allen ein schönen Feiertag!
Grüße
Maurice
ikarus991
29 May 2025 12:0529.05.2025 12:05
You can't really say for sure, it also depends on the main rotor blades.
- the leaves should not be able to touch each other
- Rear blades must not touch the ground
I have 105 on my 550....
wolfgang
kann man ja auch nicht so ganau sagen, hängt auch von den Hauptrotor-Blättern ab.
- die Blätter sollten sich nicht berühren können
- Heckblätter dürfen den Boden nicht berühren
ich habe auf meine 550er 105 drauf ....
Wolfgang
maurice.krause
29 May 2025 13:5029.05.2025 13:50
Hi everyone,
The solution was indeed the 105mm blades; the 600mm blade remains almost still and no longer spins away.
Greetings
Maurice Krause
Hi zusammen,
die Lösung waren tatsächlich die 105er Blätter, der 600er bleibt fast ruhig und er dreht sich nicht mehr weg.
Grüße
Maurice Krause
maurice.krause
23 June 2025 09:4623.06.2025 09:46
Hi everyone,
Never-ending story... I can't get the Logo 600 adjusted. The tail doesn't sway much anymore, but it's still there, and it's very annoying in some maneuvers.
I fly with the tail against the torque, that's how I learned it, but in many maneuvers with pitch and tail movements, it seems as if it doesn't have enough power. I have the Savöx 2292+ installed, so it should have enough power.
Is there any way I could have you take a look at it? I'm from the Odenwald region; I think @Rainer Vetter is from nearby, right?
I really don't have the energy anymore to mess around with the 600.
Yesterday I was at MFG Elsava, you should know Ingmar Grote, unfortunately he's also at his wit's end.
If the opportunity arises, I would also be willing to travel to you.
Perhaps something can be done about it.
Greetings
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Moin zusammen,
never ending story... Ich bekomm den Logo 600 nicht eingestellt. Das Heck pendelt zwar nicht mehr viel, aber es ist noch da, in manchen Manövern ist das auch sehr störend.
Ich fliege mit dem Heck gegen das Drehmoment hab es halt so gelernt, bei vielen manövern mit Pitch und Heck Bewegungen, wirkt es als wenn er nicht genug Kraft hat, ich hab das Savöx 2292+ verbaut, sollte also von der Kraft reichen.
Gibt es die Möglichkeit das von euch anschauen zu lassen? Ich komme aus dem Odenwald, ich meine @Rainer Vetter kommt aus der nähe oder?
Ich hab echt keine Kraft mehr dafür mich mit dem 600er rum zu ärgern.
Gestern war ich bei der MFG Elsava, den Ingmar Grote solltet ihr kennen, leider ist er mit seinem latein auch am Ende.
Wenn die Möglichkeit besteht würde ich auch ggf. zu euch fahren.
Vielleicht kann man da was machen.
Grüße
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Eddi E. aus G.
23 June 2025 09:5323.06.2025 09:53
Hi Maurice,
Unfortunately not for the next few weeks, due to vacation, a private move, ...
A few things to keep you busy in the meantime: I would try a different (completely different, it doesn't really matter which one) tail servo, ideally one with at least a narrow pulse (760 µs) and a 333 Hz frequency. The rest of the technical specifications aren't important to me for this test, as long as it's not a sail winch...
And, if someone nearby has a suitable LOGO, try swapping the entire tail rotor (hub with blade holders, blades and everything).
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Maurice,
die nächsten Wochen leider nicht, Urlaub, privater Umzug, ...
Ein paar Dinge für die Zwischenzeit: ich würde mal ein anderes (ganz anderes, relativ egal welches) Heckservo verwenden, was bestenfalls mindestens den schmalen Puls hat (760 µs) und 333 Hz versteht. Die restlichen technischen Daten wäre mir für den Test erst mal egal, solange es nicht gerade eine Segelwinde ist ...
Und, wenn jemand im Umkreis mit einem geeigneten LOGO ist, mal den kompletten Heckrotor umstecken (Nabe mit Blatthaltern, Blättern und allem).
Grüßle
Eddi
Born to fly ...
forced to work.
maurice.krause
23 June 2025 09:5623.06.2025 09:56
Hi Eddi,
Thanks for the reply, I wanted to buy something from KST anyway, also because of the new Logo 700, so I'll order a fast x20 for the rear with 760 µs.
Greetings
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Moin Eddi,
Danke für die Antwort, ich wollte sowieso, auch wegen dem neuen Logo 700, mal bei KST einkaufen, dann bestell ich mir mal ein schnelles x20 für´s Heck mit 760 µs.
Grüße
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Eddi E. aus G.
23 June 2025 10:2723.06.2025 10:27
Good morning,
And regarding the tail fins, the NHP 105 mm were simply weapons. If you can still get your hands on some... I think they're no longer manufactured, but check eBay or somewhere similar (of course, there's still some risk involved).
I personally got along just fine with EDGE in the past and Rotortech currently, but maybe your heli is just a diva :-)
—Eddi
Born to fly ...
forced to work.
Moin,
und wegen der Heckblätter, die NHP 105 mm waren einfach Waffen. Wenn Du da noch welche ergattern kannst ... werden meine ich nicht mehr hergestellt, aber Bucht oder so (natürlich mit Restrisiko).
Wobei ich selbst mit EDGE früher oder Rotortech aktuell auch problemlos klar gekommen bin, aber vielleicht ist Dein Heli ja einfach eine Diva :-)
—Eddi
Born to fly ...
forced to work.
maurice.krause
23 June 2025 10:3123.06.2025 10:31
Hi,
Yeah, that heli's definitely a diva xD. I was thinking of just taking my Savöx Monster from the 700 and installing it in there. If that doesn't work, the 600 will just have to wait until the new 700 comes out. Because my current 700 flies really smoothly. I need to correct myself, though; I have the Savöx 2272+ in the Logo 600, and the 700 has the 2292.
Let's wait and see what the future holds.
Greetings
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Hi,
ja eine Diva ist der Heli sicherlich xD, ich hab noch gedacht, ich nehme einfach mein Savöx monster aus dem 700er mal und bau es da ein, wenn nicht muss der 600er noch so lange warten bis dann der neue 700er draußen ist. Weil mein aktueller 700er fliegt ja wirklich problemlos. Ich muss mich auch verbessern, ich hab im Logo 600 das 2272+ von savöx, im 700er ist das 2292.
Mal abwarten was die Zeit bringt.
Grüße
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
maurice.krause
30 June 2025 16:5630.06.2025 16:56
Hi everyone,
Yes, unfortunately no success. So, to first address Eddi's advice, unfortunately I don't know anyone who still has a Logo 600 from which I could take the rear end.
But I tried the 2292 from the 700 series and unfortunately it behaved exactly the same way. My suspicion would be the belt; I heard somewhere that you're supposed to hold the entire ready-to-fly helicopter by the tail and then tighten the screws at the tail. Could the belt be too tight that way?
Greetings
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Hi zusammen,
ja leider kein Erfolg, also um erstmal auf den Rat von Eddi einzugehen, leider hab ich keinen der noch ein logo 600 hat, wo ich das heck mal nehmen könnte.
Aber ich hab mal das 2292 aus dem 700er genommen und leider genau das gleiche Verhalten, meine Vermutung wäre noch der Riemen, ich habe irgendwo mal aufgeschnappt das man den gesamten Flugfertigen Heli am Heck halten soll und dann die Schrauben am Heck eben fest macht, wäre der Riemen so zu sehr gespannt vielleicht?
Grüße
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Eddi E. aus G.
1 July 2025 08:5001.07.2025 08:50
Hi Maurice,
The measurement for hanging the belt (with the battery in) is a good guideline. If you were flying very hard and the belt was likely to skip, then increase the measurement accordingly.
I once had an overtightened belt, either because I'd done it myself, or because I'd painted the helicopter... so it wasn't engaging the pulleys properly anymore. It was noisier, and the tail was also unstable. Replaced the belt, and the problem was solved. You'd never guess that.
There have also been some voodoo situations where a different tail section worked wonders, and (for simplicity's sake) the 'suspected' one then worked perfectly on the other helicopter as well. It's also possible that the other helicopter had a different servo; it's been too long.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Maurice,
das mit dem Aufhängen (mit Akku drin) ist ein guter Richtwert. Wenn man sehr hart fliegen würde, wenn der Riemen überspringen würde, im Zweifel mehr.
Bei mir war mal ein Riemen überspannt, entweder durch selbst gemacht, oder weil ich den Heli halt auch mal einteint habe ... so dass er irgendwie nicht mehr richtig in die Riemenrollen gegriffen hat. War mehr zu hören, aber auch unruhig am Heck. Riemen getauscht, Ruhe. Muss man erst mal drauf kommen.
Gab aber auch schon so Voodoo-Situationen, wo ein anderes Heck Wunder gewirkt hat, und (der Einfachheit halber) das 'verdächtige' auf dem anderen Heli dann auch einwandfrei funktioniert hat. Kann aber auch sein, dass auf dem anderen Heli ein anderes Servo drauf war, ist schon zu lange her.
Grüßle
Eddi
Born to fly ...
forced to work.
maurice.krause
20 July 2025 08:4420.07.2025 08:44
Hi everyone,
@Eddi, I've tried all your points, unfortunately nothing helped, now only the servo is still open...
Is the BLS-905X sufficient?
https://www.kst-servo-shop.de/KST-BLS-905X-V2.0-8kg.cmat8.4V-760us/KST-0912 Or does it have to be the X20-1035?
https://www.kst-servo-shop.de/X20-1035-V3.0-HLS-1.2N.mat8.4-Volt-760us/KST-0432 ============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Moin zusammen,
@Eddi, ich hab mal all deine Punkte abgearbeitet, leider hat nichts geholfen, jetzt ist nur noch das Servo offen...
Reicht das BLS-905X:
https://www.kst-servo-shop.de/KST-BLS-905X-V2.0-8kg.cmat8.4V-760us/KST-0912
Oder muss es das X20-1035 sein?
https://www.kst-servo-shop.de/X20-1035-V3.0-HLS-1.2N.mat8.4-Volt-760us/KST-0432
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Eddi E. aus G.
21 July 2025 08:5121.07.2025 08:51
Good morning,
Phew, I'm afraid I can't say anything about that... who flies these servos and can contribute something?
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
puh, da kann ich leider nix zu sagen ... wer fliegt diese Servos, kann was beitragen?
Grüßle
Eddi
Born to fly ...
forced to work.
florian_neuner
22 July 2025 10:3622.07.2025 10:36
I just need to chime in briefly:
Regarding the KST servos: I unfortunately don't have a 600, but Valentin flies the 905X.
But I'm not sure if it's actually the servo, since you've already tested your tail servo from the 700 in the 600, right?
Your problem now is that the tail spins out during a pitch climb? Is that correct?
I would start troubleshooting from a different angle.
LG Flo
Muss mich mal kurz einklinken:
Also zu den KST Servos: ich hab leider keinen 600er, aber Valentin fliegt das 905X.
Aber ich wäre mir nicht sicher ob es tatsächlich am Servo liegt, da du dein Heckservo aus dem 700er ja auch schon im 600er getestet hast richtig?
Dein Problem ist jetzt dass das Heck bei nem Pitch Climbout weg dreht? Versteh ich das richtig?
Ich würde da jetzt nochmal wo anders bei der Fehlersuche ansetzten.
LG Flo
maurice.krause
22 July 2025 15:4122.07.2025 15:41
Hi Flo,
The rear end no longer swings out; sorry, the update was missing here.
Yes, exactly, I had the servo from my 700 in there, it was a little better, but still...
I also tested the entire rear end of a colleague's car, same behavior.
Problem:
The rear end is oscillating; I've already tested various oscillation suppression values and sensitivities, unfortunately always without success.
Setup reset to a preset has already been performed.
It starts to oscillate extremely during faster maneuvers, such as funnels; the tail recently became uncontrollable, and I haven't flown since, as it was simply too close for comfort.
That's why I asked about the servo; it cost almost 100 euros. Maybe it's the solution, better than trying things out and losing an expensive model.
So what's left then? The servo should arrive in the next few days, I'll test it and give feedback here, but if it's still happening after that, it can only be the VBar, right?
Thank you for your help!
Greetings
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Hi Flo,
das Heck dreht inzwischen nicht mehr weg, sorry hier hat das Update gefehlt.
Ja genau, ich hatte das Servo von meinem 700er drin, da war es zwar ein bisschen besser, aber immernoch.
Ich hab auch von einem Kollegen das komplette Heck getestet, gleiches Verhalten.
Problem:
Das heck pendelt, ich hab schon verschiedene Pendelunterdrückungswerte und empfindlichkeiten getestet, leider immer ohne Erfolg.
Setup reset auf ein Preset wurde auch schon gemacht.
Es fängt halt extrem an, sich aufzuschwingen bei schnelleren Manövern, also bspw. funnels, da ist das Heck letztens unkontrollierbar geworden, seitdem bin ich nicht mehr geflogen, da mir das einfach zu knapp war.
Deswegen fragte ich wegen dem Servo, das waren jetzt fast 100 Euro, vielleicht ist es ja die Lösung, besser als rum probieren und ein teures Modell verlieren.
Was bleibt dann jetzt noch übrig? Das Servo sollte die Tage kommen, ich werde dann mal testen und hier feedback geben, aber wenn es dann immernoch ist, kann es doch eigentlich nur noch das Vstabi sein oder?
Danke für eure hilfe!
Grüße
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Eddi E. aus G.
23 July 2025 09:0523.07.2025 09:05
Hi Maurice,
Maybe a silly question, but then again not so silly :-) ... because I've already seen it: does the tail rotor rotate the right way, or are the tail blades mounted the right way so that they don't run backwards?
Less silly: how stiff is the tail rotor when it's turning? You can test it (very, very carefully!): disconnect the linkage at the tail servo, move it a bit (how easily does it move?), then let the mechanism run, then move the linkage by hand, ... and now?
Another test: Remove the rear hub, pull it axially apart at both blade holders while rotating the hub: is it significantly harder to turn than without pulling?
And, because I've seen it before: does the pushrod hold 100% under tension? There was a pilot once whose ball joints were glued in with a rubbery consistency (wrong mixture of resin and hardener). We spent ages on the phone and writing back and forth, nothing helped, until he brought the helicopter over, I pressed on it a bit, and said, "Look at that... oh!"
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Maurice,
blöde Frage vielleicht, aber dann wieder gar nicht so blöd :-) ... weil schon gesehen: dreht der Heckrotor richtig herum, bzw. sind die Heckblätter richtig herum montiert, so dass sie nicht rückwärts laufen?
Weniger blöd: wie schwergängig ist denn der Heckrotor, wenn er dreht? Man kann (sehr sehr vorsichtig!) testen: Gestänge am Heckservo aushängen, mal bewegen (wie leichtgängig?), dann die Mechanik laufen lassen, dann das Gestänge von Hand bewegen, ... und jetzt?
Anderer Test: Hecknabe abnehmen, an beiden Blatthaltern axial auseinander ziehen, dabei die Nabe drehen: ist sie deutlich schwergängiger als ohne Zug?
Und, weil auch schon gesehen: hält das Schubgestänge 100 %-ig, auf Zug? Da war mal ein Pilot, wo die Kugelpfannen gummiartig eingeklebt waren (falsche Mischung von Harz und Härter). Wir haben damals lange hin und her telefoniert und geschrieben, nix hat geholfen, bis er den Heli vorbei brachte, ich hab ein wenig dran hin- und her gedrückt, und gemeint, guckamoldoh ... oh!
Grüßle
Eddi
Born to fly ...
forced to work.
florian_neuner
23 July 2025 09:5423.07.2025 09:54
If it's actually oscillating and not just shaking, it's often due to stiffness in the mechanism or it could also be the thrust bearings (I had that once on my 700... the thrust bearings were broken and I replaced and tried everything possible, but nothing helped until I replaced the thrust bearings. Back then, it manifested as oscillation that got worse with higher RPMs). Eddi has already given you some great starting points you can check.
But that's precisely the difference: pendulum swing - slow, trembling - fast
Does it also "oscillate" while floating?
If the funnel "oscillates" and "vibrates," that's another sign of electronics. Of course, this also interacts with the mechanics; if something is wrong with the mechanics, the electronics try to compensate. If this doesn't work because the mechanics are jammed or something similar, then suddenly it works, but the control loop has already become so overloaded that it overshoots, and so it goes back and forth.
Which servo did you order?
Do you perhaps have a video of the 600 series so one can get a better idea of what it's like?
LG Flo
Wenns wirklich PENDELT und nicht zittert ist das häufig Schwergängigkeit in der Mechanik bzw können auch die Drucklager sein (das hatte ich mal am 700er... da waren die Drucklager kaputt und ich hab alles mögliche getauscht und probiert und nix hat geholfen, bis ich eben die Drucklager getauscht hab. Das hat sich damals in Pendeln ausgewirkt dass mit mehr Drehzahl umso schlimmer wurde). Da hat Eddi schon super Anhaltspunkte gegeben die du kontrollieren kannst.
Aber da eben der unterschied, Pendeln - Langsam, Zittern - Schnell
"Pendelt" es im schweben auch?
Wenn es sich im Funnel "aufschwingt" und "zittert" ist das wiederum ein Zeichen für Elektronik. Wobei das auch natürlich mit der Mechanik zusammenspielt, sprich wenn was an der Mechanik nicht passt dann versucht die Elektronik gegen zu regeln, geht nicht weil Mechanik klemmt oder dergleichen, dann gehts auf einmal und der Regelkreis hat sich aber dann schon so weit aufgeladen dass es dann überschießt und so geht das dann hin und her.
Welches Servo hast du jetzt bestellt?
Hast du zu dem 600er vllt auch ein Video damit man sich das mal besser vorstellen kann?
LG Flo
maurice.krause
23 July 2025 13:5923.07.2025 13:59
Hi everyone,
Thanks for your replies, I've now ordered the KST BLS905X, I'm going to the airfield later because I wanted to train for the weekend anyway, I'll take the 600 with me, keep your fingers crossed that it's gone now.
Unfortunately, I don't have a video right now, but I'll remember it if I need one later.
@Edi I think if the tail still isn't working, we'll have to talk again about me possibly bringing the helicopter to you or something.
Greetings
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Hi zusammen,
danke für eure Antworten, bestellt habe ich jetzt das KST BLS905X, ich gehe nachher auf den Flugplatz, weil ich eh trainieren wollte für´s Wochenende, nehme den 600er dann mit, drückt mir die Daumen das es jetzt weg ist.
Ein Video hab ich leider gerade nicht, falls es nachher noch sein sollte denke ich daran.
@Edi Ich glaube wenn das Heck dann jetzt immer noch nicht geht, müssen mir nochmal drüber reden, dass ich ggf. den Heli zu euch bringe oder so.
Grüße
Maurice
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
maurice.krause
24 July 2025 05:2424.07.2025 05:24
Hi everyone,
The servo was the solution; I didn't have to adjust much yesterday, except for 500Hz/760us, it worked perfectly right away.
Thank you for your help!
Greetings
Maurice Krause
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Moin zusammen,
das Servo war die Lösung, ohne das ich viel einstellen musste gestern, außer eben 500Hz/760us, hat es direkt super funktioniert.
Danke für eure hilfe!
Grüße
Maurice Krause
============================================================
Logo 700 - Logo 600 - Vbar EVO/Touch
https://www.youtube.com/@mauricekrause
Eddi E. aus G.
24 July 2025 08:4524.07.2025 08:45
:-) !!!
Born to fly ...
forced to work.
:-) !!!
Born to fly ...
forced to work.