← Logo 400 ... 690

Logo 480 translated

Mikado Model Helicopters › Logo 400 ... 690 · Started by HP on 20 May 2025 19:0720.05.2025 19:07
HP 20 May 2025 19:0720.05.2025 19:07
Hello folks!
I have a few questions about the Logo 480 and its spare parts availability. Most parts are still in stock in the shop, but the blade bearing shaft, for example, is not. Will there be any more parts coming soon?
I'd like to keep flying my 480 for a while longer.
What's the general status of the 480? Will it also be revised, or is it now obsolete?
machine-translated from German · Show original
Eddi E. aus G. 21 May 2025 08:5921.05.2025 08:59
Good morning,

It's currently up in the air (hehe :-) )

I've heard that he might come back or stay.
I can ask around about BLW.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
HP 21 May 2025 19:0821.05.2025 19:08
Hello Eddi!
That sounds good. It would be a real shame to abandon it now, as there's certainly a lot of development work and expense involved.
I'd like to briefly jump in here with a different topic: the wobble effect on the swashplate.
You mentioned in another thread that you can achieve this by increasing the style and decreasing the integral.
I tried it and it actually helped, but it's not perfect yet. Unfortunately, I couldn't test it further due to the weather.
I'm currently using Style at 110 and Integral at 55. How far can I push it before reaching any critical values? Or could it be related to the servos? Savöx 1250. Neo Pro Rescue with the latest update.



Edited once. Last edited on 21.05.2025 at 19:45 by HP.
machine-translated from German · Show original
Eddi E. aus G. 22 May 2025 08:5622.05.2025 08:56
Good morning,

Well, the Savöx 1250s aren't exactly all-purpose weapons :-/

How does the wobbling manifest itself, in which flight conditions, at which RPMs?

What kind of stabilizer bar is installed?

What are the other values?

Style can be pushed to its limits.
Theoretically, yes, although I wouldn't go to 0, as that would eliminate heading hold on the swashplate and also loss consistency in the controls (rotation rate regulation). Before that, it simply decreases; you can certainly experiment with that, but I would always keep a 'safety net' to fall back on if things get tricky.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
HP 22 May 2025 11:3022.05.2025 11:30
Hello Eddi!

Stabi is a NEO pro rescue, control VBar control touch with the latest updates installed.
The wobbling is only visible when hovering; it's practically invisible in flight.
The tail boom moves about half a centimeter up and down, i.e., via pitch, but you can also see it via roll.
Just a wobbling motion with a (let's call it a repetition rate) of about 1-2 times per second.
Engine speeds are 2100-2200-2300, almost nothing at bank 3, but still clearly recognizable at bank 1.
Style 110
Sensitivity 70
Integral 55
All other values are set to default on all banks.
machine-translated from German · Show original
Bernhard Kerscher 23 May 2025 08:5723.05.2025 08:57
Hello HP,
In my experience, the head damping of the 480xx is a bit too harsh.
Especially suitable for low speeds and light blades.
That's why wobbling will be easier for you at high speed.
How did you set up your head, with 1mm washers or 0.5mm washers?
8x11x0.5 (soft dampening)
8x11x1 (hard dampening)
You can also wait and fly for a while; perhaps the rubbers will soften and the wobbling will disappear on its own.
Greetings Bernhard



Edited twice. Last edited on 23.05.2025 at 09:08 by Bernhard Kerscher.
machine-translated from German · Show original
Eddi E. aus G. 23 May 2025 09:2623.05.2025 09:26
Good morning,

That's a good idea too :-)

I would also try weighing the main rotor blades, or, more simply, placing a strip of insulating tape at the center of gravity on one blade and seeing if it improves or worsens.
And if you have them, try different tail rotor blades, or weigh them as well.
I used to have something similar (tail boom up-down), rigid, without stabilization.
I fitted different tail fins almost by accident, changed nothing else, and bam, it was gone.

You can also experiment with the center of gravity; just shift the battery slightly, if in doubt, lean it slightly forward.

Ultimately, it's about making the job a little easier, especially for 'normal' servos.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
HP 23 May 2025 19:2123.05.2025 19:21
Hello!
I bought the helicopter used and took the rotor head apart to lubricate the O-rings and the blade shaft, but I didn't check whether it had 0.5mm or 1mm shims. That would be another possibility, of course.
I will keep you updated on how things have been going as soon as the weather improves.
The main and tail rotor blades are from RT, as they come in the kit.
It'll be fine, my 550 SE flies perfectly after all, without any problems.
Greetings to everyone and thank you for the answers.
machine-translated from German · Show original
HP 21 October 2025 18:4821.10.2025 18:48
Hello folks!

It took quite a while, but I wanted to give you a quick update on how the story turned out.
In short: The 480 flies great now, the wobbling is gone!
I disassembled the rotor head a few more times and tested it with various damping configurations.
The final version has a 1mm shim inside with ground-down O-rings, just like in Rainer's video Low RPM Dampening.
Now it flies perfectly!
However, I have another question regarding the assembly instructions, specifically whether I've interpreted them correctly. I see a 1mm and a 0.5mm shim being used. I tried it that way, but the blade grips were quite stiff and it wasn't flyable. Severe wobbling and significant oscillations after cyclic control inputs were the result.
I also tried using only a 0.5mm shim, but then the blade holders were stiff, probably because 0.5mm is too little clearance between the O-ring and the inner blade holder bearing. I think the O-ring then touches the outer race of the blade holder bearing.
machine-translated from German · Show original
Eddi E. aus G. 22 October 2025 08:5522.10.2025 08:55
Good morning,

In my opinion, it depends on what you use it for, what RPMs you fly, and whether the head should be tuned harder or softer.
"Smoke is difficult" is relative.
And the forces have to be absorbed somehow, so that nothing comes loose or tilts.

The servos must also be able to handle/cope with this.

For most people, I think it works as described in the instructions, but it's also not wrong to try, for example, with 1 mm, or with different rubbers, or to sand down the rubbers, and it may also change over time as everything breaks in, settles, and with the aging of the rubbers.

The main thing is that the helicopter flies great (now) :-) I'm happy!

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless