← Logo 200

Logo 200 bec voltage

Mikado Model Helicopters › Logo 200 · Started by Marianovbar on 11 June 2025 13:3111.06.2025 13:31
Marianovbar 11 June 2025 13:3111.06.2025 13:31
Hi.
Is possible to use hv servos on logo 200?
Regards
Eddi E. aus G. 11 June 2025 14:4811.06.2025 14:48
Hi,

well, the BEC is rated 5 V, so I'm not sure if it makes sense.

You could certainly run parallel voltage supply, and only glean reference ground and signal from the VBar, if you know what you're doing.
But then, the best way would be, have 12 V (3s) servos, else you'd need an extra BEC or some other solution.

I personally think, a LOGO 200 with VBar EVO micro V8 will do the job, even with the regular servos.

Best,

—Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless