← Logo 200

Logo200 range? translated

Mikado Model Helicopters › Logo 200 · Started by Maik1702 on 30 April 2025 15:2830.04.2025 15:28
Maik1702 30 April 2025 15:2830.04.2025 15:28
Hello,
Is it normal for the range to be only about 70m and for it to go into failsafe mode?
I tried it with a VBar Control Touch and EVO.

Regards, Maik
machine-translated from German · Show original
RV 30 April 2025 16:0130.04.2025 16:01
No. Unless the model is standing on the ground.
Please take screenshots of the radio status from a distance of approximately 10 meters.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Maik1702 30 April 2025 20:2930.04.2025 20:29
Hello Rainer,
Yes, the model was standing on the floor.
I've now placed it on a barrel and turned it 45° towards me.
I walked 10 meters and the antenna was pointing towards the model.

Regards, Maik

Logo200; Vbar Control; Vibe90; Goblin 570

machine-translated from German · Show original
RV 1 May 2025 10:1701.05.2025 10:17
That's fine.

With the L200, you notice the ground effect much more because it's not as high.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Maik1702 19 June 2025 08:2019.06.2025 08:20
Hello, I need to revive this topic.
The range is always on my mind.
So I tested it again.
The helicopter is at a height of 1.3m and loses reception after about 60m.
The packets go down to 49PK/s.
It travels approximately 120m in the air before falling downwards.
Is this normal for the Neo mini?

Regards, Maik
machine-translated from German · Show original
Eddi E. aus G. 19 June 2025 09:0019.06.2025 09:00
Good morning,

No, that doesn't sound normal. The annoying thing is that the NEO can't log radio transmissions yet, otherwise we could see more.

You could do a comparison with another helicopter using NEO at the same location and distance.
They should behave the same, also with regard to the packet rate, since they are designed for the same performance, use the same protocol, etc.

If in doubt, we would have to take a look at it and/or replace the stabilizer.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Maik1702 19 June 2025 11:1119.06.2025 11:11
Hi Eddi, I've already tried that (to rule out the spark) and it still stays at 100 PK/s.

Regards, Maik
machine-translated from German · Show original
Eddi E. aus G. 19 June 2025 11:2019.06.2025 11:20
Hi Maik,

Okay, so for some reason very few (usable) packets are reaching the processor, even though the signal levels (screenshots) look OK, and the radio connection itself might even be OK. Strange.

Please create a service case for this, and we will take it from there.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Maik1702 19 June 2025 11:2819.06.2025 11:28
I will, thank you.
machine-translated from German · Show original
Maik1702 24 June 2025 10:3724.06.2025 10:37
Hi Eddi,
Please send me another email regarding the service case Mikado RMA ID 28478 - VBar NEO Micro.
Something has changed.

Regards, Maik



Edited once. Last edited on June 24, 2025 at 10:38 AM by Maik1702.
machine-translated from German · Show original
Eddi E. aus G. 24 June 2025 11:5424.06.2025 11:54
Done.

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless