linken98
14 January 2026 21:3814.01.2026 21:38
Hi, I'm thinking of getting the helicopter. I have the first VBar control; will it work with that? Also, I'm wondering if there was a training function with a landing pad back then, as far as I remember, to practice in a certain area without crashing. Does that still exist? Greetings from Tyrol!
Hallo, wuerd mir vlt den Heli gerne zulegen, ich hab die erste vbar control funktioniert das damit? Außerdem frag ich mich es gab damals ne trainier Funktion mit einer Lande Platte soweit ich mich erinnere kann um in einem gewissen Bereich zu trainieren ohne das er Crasht, gibt es das noch? Glg aus Tirol
Eddi E. aus G.
15 January 2026 09:0615.01.2026 09:06
Good morning,
You can bind and fly the LOGO 200 V8 with the Classic, but you can no longer make any settings.
V8 only works fully with VBar Control Touch or EVO/+.
If you are happy with the Classic and want to stick with it, I would recommend the non-V8.
The current bundle even includes the rescue function, and therefore also the beginner mode, which is essentially a trainer but without virtual airspace limitations and a safety net. Nevertheless, you can practice quite safely with the self-leveling and roll angle limitation if you can already hover, take off, and land reasonably well.
Then there's the trainer as a set (just take a look in our shop).
However, they are currently frequently sold out, and although we are constantly producing new ones, it can take some time.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
man kann den LOGO 200 V8 mit der Classic binden und fliegen, kann allerdings keine Einstellungen mehr vornehmen.
V8 funktioniert vollumfänglich nur mit VBar Control Touch oder EVO/+.
Wenn Du mit der Classic zufrieden bist und dabei bleiben möchtest, würde ich Dir den nicht-V8 empfehlen.
Da ist aktuell sogar die Rettungsfunktion im Bundle, und damit auch der Beginner-Modus, also quasi Trainer aber ohne virtuelle Flugraumbegrenzung und Sicherheitsnetz. Trotzdem kann man mit dem Self-Leveling und der Kippwinkelbegrenzung recht sicher üben, wenn man bereits halbwegs sicher schweben, starten, landen kann.
Dann gibt es eben den Trainer als Set (schau einfach bitte mal bei uns im Shop).
Die sind aktuell allerdings immer wieder ausverkauft, und wir produzieren zwar immer wieder neue, es kann aber etwas dauern.
Grüßle
Eddi
Born to fly ...
forced to work.
linken98
15 January 2026 09:4115.01.2026 09:41
Thanks, is there any other difference in the stabilizer between the Logo 200 and the Logo 200 V8?
Then I have another question: which VBars still work with the first generation VBar Control?
Thanks so much
Danke, ist zwischen den Logo 200 und den Logo 200 V8 sonst noch ein unterschied beim stabi?
Dann hätte Ich noch eine frage, welche vstabis funktioniern noch mit der Vbar Control erste Generation?
vielen lieben dank
Eddi E. aus G.
15 January 2026 11:4415.01.2026 11:44
Hi,
LOGO 200:
The VBar NEO micro and first-generation controllers require an external current/voltage sensor for telemetry.
V6 (NEO) Firmware, currently bundled with Pro+Rescue.
LOGO 200 V8:
VBar EVO micro and 2nd generation controllers with integrated telemetry,
V8 (or after downgrading to V7 also fully compatible with Classic) (EVO) Firmware, currently bundled with Pro.
All firmware versions up to V7 can be configured with the Classic.
V8 (only available for VBar EVO) then only with Touch or EVO.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi,
LOGO 200:
VStabi NEO micro und Regler der 1. Generation, benötigt für Telemetrie einen externen Strom-Spannungs-Sensor,
V6 (NEO) Firmware, aktuell im Bundle mit Pro+Rettung.
LOGO 200 V8:
VStabi EVO micro und Regler der 2. Generation mit integrierter Telemetrie,
V8 (oder nach downgrade auf V7 auch voll kompatibel mit Classic) (EVO) Firmware, aktuell mit Pro im Bundle.
Alle Firmware-Versionen bis V7 können mit der Classic eingestellt werden.
V8 (gibt's auch nur für VStabi EVO) dann nur noch mit Touch bzw. EVO.
Grüßle
Eddi
Born to fly ...
forced to work.