← Logo 200

Logo 200 V8? translated

Mikado Model Helicopters › Logo 200 · Started by Bernd S. on 13 February 2026 18:3613.02.2026 18:36
Bernd S. 13 February 2026 18:3613.02.2026 18:36
Hmmm - basically a stupid question (what kind of answer am I expecting?)

I am an "old" VBar pilot, but mostly just light aerobatics.

Heli's: 600SE / 600SX and a Staufenbiel 325 - all with VBars from that era.

The Staufenbiel 325 (indoor) helicopter recently started acting up with the servos (which are also quite old).

Now I'm considering buying a 200 V8 for indoor use (it can do more than me (of course I'm over 50)).

But then I also have to switch transmitters to Mikado - I fly MPX.
(Profi TX/Profi 4000 and "full" receiver with sum signal)
Telemetry is standard and a "must" for me - the V8 has all that.

What do you think? (Okay, what should you write now? ;-) )

The investment is definitely in the four figures, with a 2 at the beginning, all inclusive.

The VBars have been doing their job perfectly for years - therefore, despite other systems, I would remain loyal to Mikado - but changing the transmitter just because of a helicopter is less appealing to me - and if so, it has to be a tray-style transmitter (okay, you can find everything in the Mikado shop) - the precision of a once-adjusted VBar helicopter with good servos is always noticeable.

Greetings - back again after years!

Bernd
machine-translated from German · Show original
Eddi E. aus G. 16 February 2026 08:5916.02.2026 08:59
Hi Bernd,

Both currently available 200 series models are equipped with VBars, which are no longer adjustable via PC software (no USB port except for a makeshift solution for updates, which requires unplugging servos, or V8, for which there is and will be no PC software).

As a workaround, someone could configure the helicopter using VBar Control so that the VBar can use an external receiver as an input.

Then you _could_ fly the helicopter with a third-party transmitter, but you would be extremely limited in your adjustment options (if you wanted or needed to adjust something, e.g., after a repair).

Telemetry data would not be returned to the external transmitter, meaning, for example, that flying based on capacity would not be possible.

Greetings too :-)

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 16 February 2026 15:2316.02.2026 15:23
Hi Eddi,

Thanks for the summary.

The "workaround" is of no use to me either, because I consider telemetry important.

Therefore, there is no way around using the latest VBar transmitter.

A mental excursion into the world of Spektrum transmitters was almost discarded today after a real hands-on experience with a larger Spektrum transmitter - the thing just doesn't suit me.

Spektrum opens up a lot of BNF stuff - but I don't need 5-10 toys - just one good toy.

The Horizon hobby helicopters are hardly any cheaper in reality (except in terms of materials - hands-on review here today).

I weigh things up carefully - hence the questions (but of course I also read ;-) )

Greetings

Bernd
machine-translated from German · Show original
Eddi E. aus G. 16 February 2026 15:5516.02.2026 15:55
Hi Bernd,

Always happy to help. And feel free to ask, it won't get any better than this, not even on Jibbidy, Schemminei, or whatever they're called (yet) :-)

At least I dare to say when I don't know something ^^

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 16 February 2026 16:1416.02.2026 16:14
8-) - Yes, admitting you don't know is good - many forum members lack that - therefore I'm not always "popular" there, especially when you know the reality in the person of hyped "experts" - you can easily get banned :-)

I'm looking for information - after more than 10 years of flying, a lot of it is new to me.

I have one more question (although I find it almost uncool - but if it helps someone):

How is the rescue function triggered? - Do I flip a switch and the system brings the helicopter into normal flight attitude, and can I then "re-enable" it after I've recovered and adjusted the pitch to a sensible position?

I didn't find that many "usable" YouTube videos on that topic.
machine-translated from German · Show original
RV 16 February 2026 18:4616.02.2026 18:46
I seem to recall that the autotrim value for the L200 should be manually set to -120 after the AT flight.

Regarding the rescue function – the switch is a trigger. From the middle position to the rescue position, the rescue operation is initiated. Therefore, it's best to use the spring-loaded part of the 3-way switch.

After deployment (skids down, pitch after deployment should result in a slight climb), the pitch movement is detected and the rescue pitch (adjustable) is applied to the control stick. If the stick is not moved, the rescue pitch remains stationary for a few seconds to bridge the initial shock.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Bernd S. 17 February 2026 06:5417.02.2026 06:54
Thank you... everything is noted - I will get back to you with a decision!
(Or rather, you can see that anyway)

Bernd
machine-translated from German · Show original
Eddi E. aus G. 17 February 2026 08:5917.02.2026 08:59
Good morning,

Quote: RV
I seem to recall that the autotrim value for the L200 should be manually set to -120 after the AT flight.

Yes, the first 200 with a V6 engine.

When flying 200s with V8 engines, I wondered why the tail was so strange, then I reset the autotrim, did it again, and it was better.
High values were indeed automatically generated for the V6, while lower values were generated for the V8, possibly because the rear end is now controlled more directly overall?

Just an observation, the experts (e.g., Alex, Marik, Mirko?) should comment on this.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 17 February 2026 09:2517.02.2026 09:25
So... I'll be ordering soon!

And if there are any problems, I know who I can ask ;-).

'The set includes a transmitter and 3 batteries/discs, etc.'

I think the orange/blue hood would look nicer - but that's not available for the V8.

And if it ever becomes available, I might actually like the metallic red joystick/knob set.

But that can be done later - first it needs to be made suitable for indoor use, the old 325 is 15 years old and nearing its end of life.

Thanks for the perfect support once again (just like in my early days with VBar in 2012)

Regards, Bernd
machine-translated from German · Show original
Bernd S. 19 February 2026 14:5419.02.2026 14:54
The little guy and his V-Control have arrived!

The number of parts is slightly different than ordered - but I won't complain :-) .

The devices were somehow having trouble with the QR code - but I registered the transmitter differently (via USB).

Batteries charged - set up - preflight check - off to the yard - maiden flight completed.

I still need to see the apps - everything is new - but telemetry etc. is all working.

The topic can be "closed".

Greetings from still really cold Lübeck

Bernd
machine-translated from German · Show original
Eddi E. aus G. 20 February 2026 08:5620.02.2026 08:56
Hi Bernd,

Regarding QR codes, there's a 'classic' issue: if you use the private/anonymous/secure mode in your browser on your phone or tablet, it doesn't remember, by definition, that you're already logged in.

Otherwise, please always let us know if you encounter any error messages.

Fall Fergniegen!

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 20 February 2026 11:3120.02.2026 11:31
Hi Eddi,

I first tried to load the QR code on a QR code website - it didn't recognize it.

Then I inverted the code - it still didn't recognize it.

Then I grabbed my wife's phone because I (didn't feel like) using a QR code app on my smartphone.

This QR code app also failed to recognize the code - I scanned something else for testing - that worked.

Therefore, the QR code itself was not recognized and thus no link was accessed.

Could that have been due to the dark design (it looked inverted to me)?

Then my inner voice told me that you can also register via USB - and it worked.

I'll register the VBar from the L200 right away - that has to be done via USB anyway, right?

(Sorry for the possibly stupid questions - I'm just a returning player)

Regards, Bernd
machine-translated from German · Show original
Eddi E. aus G. 20 February 2026 11:5220.02.2026 11:52
Good morning,

Everything's fine, there are no stupid questions, only stupid answers, and that's my job :-)

The QR codes are not actually inverted; even when the dark theme is loaded, they always appear black on white (with a border).

Point and shoot, click, be happy (the camera app does it automatically, do you need anything else?!).

The stabilization only works with the transmitter :-)

Greetings

Eddie

Born to fly ...
forced to work.

machine-translated from German · Show original
Bernd S. 20 February 2026 12:4120.02.2026 12:41
Hmm... is it only possible to register the VBar with a transmitter?

I'm like the bumblebee - they say it can't fly, but it does.

Before reading this, I had registered the VBar from the L200 via USB - I was curious about 8.xPro_Rescue.

After rebinding, it briefly stopped receiving the controller telemetry - but everything was fine again.

... I'm still in the training phase.

Well, I'll finish building some kind of QR code reader eventually - I just don't need one.
(And my smartphones are Google/Mac-free - only with what I want on them)

Okay, now hands off the configuration - it's on Sunday - I don't want to misconfigure anything and then not be able to make my first REAL flight on Sunday - the L200 is a nice toy :-) .

Status: Everything is up-to-date, everything is registered - everything is working - more2come

Bernd
machine-translated from German · Show original
Eddi E. aus G. 20 February 2026 13:2120.02.2026 13:21
Ha,

Now you've got me: the EVO micro has USB again, which the NEO mini and micro didn't have, or only in a roundabout way, with a boot plug and adapter cable and having to unplug the servos for it.

Because I'll have a nice day indoors too... but differently :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 21 February 2026 08:0421.02.2026 08:04
The USB port is easily accessible at the front - so that was no trouble - problem solved.

Greetings

Bernd
machine-translated from German · Show original
Bernd S. 23 February 2026 07:0423.02.2026 07:04
Brief report - first "real" (indoor) day:

First flight was a bit wobbly - maybe it still needed some breaking in (4000 rpm)?

Then things quickly improved, and after 2-3 flights he was flying like a pro.

Battery voltage telemetry seems to be partially faulty - the warning level was at 3.3V but it complained at 11.1V total voltage without me "touching" it - however, the voltage reading of the total voltage was correct.
(Warning temporarily reduced so it's not annoying)

The pirouette test wasn't quite clean during the first flight - searching for trim flight in the transmitter was unsuccessful due to distractions (do you want a coffee?) - but (is this just a warm-up?) the pirouette was clean on subsequent flights - I still lack practice with VBar control (finding menus quickly).

Flight time with slightly increased RPM afterwards (4200 RPM) initially for getting used to it 7:15-7:30 minutes with the 650 original batteries - tail/side/nose hovering and a little circuit flying.

Made 7 flights yesterday.

Conclusion: It's already working - and the fact that it flies so cleanly has also been noticed by the curious onlookers.
Head speed should be reduced further - fly more gently in the hall.

Vibration level approximately 250 - should I do anything else (> not for now - let it break in / give it time?)?

Greetings Bernd
machine-translated from German · Show original
Eddi E. aus G. 23 February 2026 09:1623.02.2026 09:16
Hi Bernd,

wobbly... possibly also (re-)accustomment.

With the first LOGO 200, we had 3,800 rpm in bank 1, now it's 4,000. That's good for sightseeing and even aerobatics.
You can try less, but I don't know if it makes sense.

The battery telemetry is smoothed, but it will still warn you if a certain threshold is reached. 3.3V is very low, and you might see 11.1V again without a load. The trick is to do without such things (and timers) and instead fly according to capacity ;-)
That means, for example, first leave the battery reserve set to 30%, fly, and when the warning comes on, land, charge, and see how much charge it takes.
Some people just set the reserve to 20% for an extra half minute of flight time or so, which works, but I prefer to conserve the battery and just use the next one. Charging at 2C, for example, is also fast.

The battery telemetry is so reliable (test it on the first flights, of course!), that I haven't activated anything else.

You don't need to do the trim flight or anything else right away, the helicopters arrive from us fully prepared and ready to fly in.

Important (this brings us full circle :-) ) ... don't tighten the rotor blades too much, otherwise it will vibrate/wobble.

The vibration level is... nothing. You can check when it occurs if you're bored. It might happen when you put the helicopter down, or when it briefly bounces on a hard surface while taking off, or if you bump it slightly during landing... but apart from that, fly it, have fun :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 23 February 2026 14:4323.02.2026 14:43
Exactly, less thinking - more flying... .

I've been doing battery telemetry since 2012 - primarily based on capacity.

In addition, there's an undervoltage warning – and this seems to trigger too early with the OMP regulator.

But yes - you keep an eye on that anyway - and you shouldn't overdo it.

I took a short flight outside during my lunch break - at 3600 rpm - it's possible even with a bit of wind.

So, I think everything is clear now - the rest regarding the L200 is up to me.

Thank you for your efforts!

I also watched the videos - now I'm more in touch with VBar in the present.

Regards, Bernd
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless