Hi Arno,
We are about to deliver the first new LOGO 700s.
This is followed by the LOGO 580, a long-established 6s size/class, which roughly corresponds to the earlier 550 SE or 600.
In practical terms, this means that all helicopters from the 500 to the 600 SX will continue to have a supply of spare parts, although not necessarily on a 1:1 basis – you may have to replace assemblies where you would otherwise only have needed one or two parts.
The product range had simply grown too broad and deep organically, which on the one hand made logistics more complicated and complex and no longer reflected the current market situation, despite parts compatibility, and on the other hand had long been difficult to understand (hmm, 550 SE, 600, SX... are they all (almost) the same? -> 580s; or is it 550, 550 SX or 600 SE or 690 SX? 600s with 6s, 10s, 12s? Can you stretch it? -> 6s class, 12s class, 14s class – rock, paper, scissors).
So – planned – 200-?-580-700-800, and as I said, if it makes sense depending on the repair effort, you can convert to the 580 standard and parts (which you could also continue to fly with the other known drives and gear/pinion combinations), repair the 700 with current parts, _and_ that brings the additional advantage of more current and durable mechanical parts as well as a more modern look, e.g. without tail struts, more compact.
Continuity to an appropriate degree, even if there is a break in the overall selection.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Arno,
wir stehen kurz davor, die ersten neuen LOGO 700 auszuliefern.
Dem folgt der LOGO 580, eine seit längerem gängigen 6s-Größe/Klasse, die in etwa dem früheren 550 SE bzw. 600 entspricht.
Bedeutet praktisch, alle Helis vom 500-er bis 600 SX haben weiterhin Ersatzteilversorgung, wenn auch nicht mehr unbedingt 1:1 – man wird ggfs. Baugruppen erneuern müssen, wo man sonst nur ein oder zwei Teile benötigt hätte.
Das Angebot war organisch einfach zu breit und tief gewachsen, das wurde zum einen logistisch komplizierter und komplexer und wurde der aktuellen Marktsituation auch nicht mehr gerecht, trotz Teile-Kompatibilität, und zum anderen war es schon lange nur schwer durchschaubar (hm, 550 SE, 600, SX ... eigentlich alle (fast) gleich? -> 580er; oder doch 550, 550 SX oder 600 SE oder 690 SX? 600-er mit 6s, 10s, 12s? Kann man den stretchen? -> 6s Klasse, 12s Klasse, 14s Klasse – Schere, Stein, Papier).
Also – geplant – 200-?-580-700-800, und wie gesagt, wenn's Sinn ergibt je nach Reparaturaufwand, kann man eben auf 580-er-Stand und Teile umbauen (den man auch mit den anderen bekannten Antrieben und Zahnrad-/Ritzel-Kombinationen weiter fliegen könnte), den 700-er mit aktuellen Teilen instand setzen, _und_ das bringt noch den Vorteil der aktuelleren und belastbareren Mechanikteile sowie eines moderneren Looks, bspw. ohne Heckabstrebungen, kompakter.
Kontinuität in angemessenem Maße, wenn auch ein Bruch stattfindet in der Gesamtauswahl.
Grüßle
Eddi
Born to fly ...
forced to work.