ikarus991
7 March 2026 22:0607.03.2026 22:06
Hello, during my last flight with Logo700, the announcement "Backup active" was made during a maneuver.
That made me a little uneasy, but I continued flying and no further messages came through.
How should I evaluate this message?
- Is there anywhere I can read up on VBackup? (Its function and what the messages mean...)
The log contains
17:45:04 VBackup:Backup active!
17:45:04 Power restored, cap 7.2V
Do I need to do anything?
Regards, Wolfgang
wolfgang
Hallo, bei meinem letzten Flug mit Logo700 kam bei einem Manöver die Ansage Backupaktiv.
Das hat mich dann ein wenig verunsichert bin aber weitergeflogen und es kam keine Meldung mehr.
- Wie habe ich die Meldung zu bewerten?
- Kann ich irgendwo was zum VBackup nachlesen? (Funktion und was die Meldungen bedeuten ....)
Im Log steht
17:45:04 VBackup:Backup aktiv!
17:45:04 Versorgung wieder hergestellt, cap 7,2V
Muss ich was tun??
Gruß Wolfgang
Wolfgang
RV
8 March 2026 21:3908.03.2026 21:39
Yes - then the voltage and its slope during the drop were such that the VBackup kicked in. This can be caused, for example, by the servos and the BEC.
If this happens more often, but the helicopter itself is OK, you can lower the threshold a bit in the VBackup app ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Jou - dann ist die Spannung und deren Flankensteilheit im Absinken so gewesen dass das VBackup angesprungen ist. Das kann z.B. durch die Servos und das BEC dann bedingt sein.
Sollte das öfter kommen und der heli an sich aber i.o. sein kann man in der VBackup App die Schwelle etwas zurücknehmen ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ikarus991
8 March 2026 23:2908.03.2026 23:29
Hello Rainer,
Thanks for the info,
I will observe and familiarize myself with the app.
Do I need to install anything for that?
Regards, Wolfgang
wolfgang
Hallo Rainer,
DANKE für die Info,
werde ich beobachten und mich mit der App beschäftigen.
Muss ich da was für installieren?
Gruß Wolfgang
Wolfgang
Eddi E. aus G.
9 March 2026 09:1709.03.2026 09:17
Hi Wolfgang,
No, not really. The VBackup app has everything you need.
If you could recreate this on the ground with leaves (a few sharp pitch movements), you could use the oscilloscope app from the Pro/Value and an EVO to visualize what's happening, in order to better evaluate whether everything is (still) safe or – oops – the voltage is dropping dangerously low.
If in doubt, a good old electrolytic capacitor in parallel can help, simply for the peaks, to smooth out the signal where the backup (actually intended as an emergency power generator) is somewhat slower.
Another thought: some BECs are more resilient if you don't set the voltage to the maximum: 8.4 V -> dips, 7.4 V ... everything's fine.
They can only deliver their maximum power (P=U*I) if they are at the limit with the given servos; you can perhaps compensate for something via the voltage.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Wolfgang,
nö an sich nicht. die VBackup App hat alles was man braucht.
Wenn man das am Boden mit Blättern schon nachstellen könnte (ein paar zackige Pitchzüge), könnte man mit der Oszi-App aus dem Pro/Value und mit einer EVO auch sichtbar machen, was da passiert, um besser evaluieren zu können, ob alles (noch) safe ist oder –oops– die Spannung gefährlich tief einbricht.
Im Zweifel hilft noch ein guter alter Elko parallel, einfach für die Spitzen, zur Glättung, wo das Backup (eigentlich als Notstrom-Aggregat) etwas träger ist.
'n anderer Gedanke noch: manche BECs sind resilienter, wenn man die Spannung nicht auf's Maximum stellt: 8,4 V -> Einbrüche, 7,4 V ... alles schick.
Die können halt P=U*I auch nur ihre Maximalleistung bringen, wenn sie da auf Kante sind mit den gegebenen Servos, kann man eben über die Spannung vielleicht noch was ausgleichen.
Grüßle
Eddi
Born to fly ...
forced to work.
ikarus991
9 March 2026 12:5709.03.2026 12:57
Hi Eddi,
mine and with EVO the VBAR Control EVO or VBAR Evo (receiver)
Sorry, sometimes I don't understand the terminology....
I do have a VBAR Controll EVO with Pro, but a Vbar Neo is working on the Logo700.
Can I test it with the oscilloscope app using the components you already have, as you described?
Thanks, Wolfgang
wolfgang
Hallo Eddi,
meins ud mit EVO die VBAR Controll EVO oder VBAR Evo (Empfänger)
Sorry ich blick manchmal nicht durch die Bezeichnungn druch....
Ne VBAR Controll EVO mit Pro hab ich ja, aber auf dem Logo700 werkelt ne Vbar Neo.
Kann ich das wie du beschrieben hast mit der Oszi-App mit den vorhanden Komponenten Testen?
Danke Gruß Wolfgang
Wolfgang
Eddi E. aus G.
10 March 2026 09:2710.03.2026 09:27
Good morning,
When I mean the transmitter, I usually write VBar Control to avoid any confusion.
But the oscilloscope function was only introduced with the (VBar) EVO; this is not yet possible with the (VBar :-) ) NEO.
VBar Control Touch or EVO/+ with Pro/Value Pack.
Somehow, we settled the matter with the terminology at the latest when we adopted the English term VBar (for VBar, Virtual FlyBar, Virtual Stabilizing Bar) for the transmitter in general, hence VBar Control.
VControl would have been better, but there were trademark concerns...
In the wild, everything is a VBar..., and upon further inquiry, what kind, yes, a blue one :-)
Grüßle
Eddi
Born to fly ...
forced to work.
Edited 3 time(s). Last edit at 03/10/2026 09:29AM by Eddi E. aus G..
Moin,
wenn ich den Sender meine, schreibe ich i.d.R. VBar Control, damit es eindeutig bleibt.
Aber die Oszi-Funktion hat erst die (VStabi) EVO mitgebracht, das geht mit einer (VStabi :-) ) NEO noch nicht.
VBar Control Touch oder EVO/+ mit Pro/Value Pack.
Irgendwie haben wir uns mit den Bezeichnungen spätestens in dem Moment die Karten gelegt, als wir den englischen Begriff VBar (für VStabi, Virtual FlyBar, Virtuelle Stabistange) für den Sender allgemein übernommen haben, VBar Control eben.
VControl wäre besser gewesen, da gab es aber namensrechtliche Bedenken ...
Auf freier Wildbahn ist alles eine VBar ..., und auf genauere Nachfrage was für eine, ja, so eine blaue :-)
Grüßle
Eddi
Born to fly ...
forced to work.
Edited 3 time(s). Last edit at 03/10/2026 09:29AM by Eddi E. aus G..
ikarus991
10 March 2026 23:4710.03.2026 23:47
Okay, let's get bogged down...
wolfgang
ok, versanden ....
Wolfgang