johnco61
26 July 2026 19:0626.07.2026 19:06
Hope I'm posting in the right area?
Hi
I've just picked up a Airbus H135 with a Silverline system and a spectrum satellite. Can I just fit a vbar satellite and bind to my radio or do I need to swap it out for a neo?
Are the settings for that helicopter stored on the Silverline in the same way as the neo, and can I transfer them to a neo, if I choose to go down that road? Is setting up a scale helicopter any different from setting up my Goblin using a neo?
I will more than likely have a few more questions when setting this up, so if anyone has experience with scale helicopters I would appreciate any advice you could give
Regards John
RV
26 July 2026 22:0526.07.2026 22:05
I would highly recommend using a VBar EVO with V8.
There are milestones in between, even a NEO is performing lower than the EVO here.
Old VBars...nope. Way too old hardware and control loop.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
I would highestly recommend using a VBar EVO with V8.
There are milestones in between, even a NEO is performing lower than the EVO here.
Old VBars ... nope. Way too old Hardware and Control Loop.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
johnco61
27 July 2026 11:0527.07.2026 11:05
Thanks very much for that Rainer,
I was thinking to fit a receiver to the Silverline, bind then save to the radio. If I then install an evo would I be able to load the old settings to the evo.
I'm a bit worried about starting from scratch, as the helicopter apparently flys very well with the setup at the moment, do you think it will transfer over?
Regards John
Eddi E. aus G.
27 July 2026 12:1227.07.2026 12:12
Hi John,
while it's of course possible to use the model with a receiver satellite (with the possibilities of VBar Silverline), you'd always have to do a new setup.
Right now, it's version 5.3 at best, but for VBar Control, you need to update to version 6.0, which requires that.
What you can do is, meticulously copy or screenshot all the screens and panels from the PC software with the VBar connected, and then, after an update, create that new setup and dial in again the parameters you find in both.
That'd even be possible with VBar NEO or EVO, at least as far as it concerns the basic model setup, not necessarily the flight parameters.
For example, there are parameters which VBar (any) doesn't know if set in a foreign transmitter, like collective and/or throttle curves, dual rate, expo, and if set so also tail gain, which (with VBar Control) are also all stored inside the VBar (where they belong ^^).
So even if you do the process as described above, take dual rate (agility and yaw rate) into account, too, as well as curves or other throttle/governor settings, and (if set up adjustable) the tail gain from the foreign transmitter.
Don't fear a new setup, as a general rule, they are often done quicker (and are safer) than all the other steps.
But bottom line, or top line, for the best result, I'd really also recommend a current VBar EVO VLink :-) and not just because we also like selling VBars—there's really a huge difference between the two, hardware and software-wise.
Best,
Eddi
Born to fly ...
forced to work.
Edited 1 time(s). Last edit at 07/27/2026 12:13PM by Eddi E. aus G..
johnco61
27 July 2026 12:5927.07.2026 12:59
Thanks Eddi, I think I'll fit a new evo, I do have a spare neo so will maybe start with that. I have setup meany helicopters with neo's, as you say it take minutes, just with an expensive scale it's a bit scary, but I'm sure I'll be fine.
Is a large scale ok with just one receiver, or can you add another? I see people using jeti or spektrum have at least two.
Once again thanks for the response.
Regards John
Eddi E. aus G.
27 July 2026 13:2427.07.2026 13:24
Hi John,
how large is large?
In any case, with VBar NEO, you can add another (VBar NEO) one, as an extender, adding two more antennas and a bunch of servo ports.
With VBar EVO, you can either do that (VBar EVO Extender, then), or our Remote Antenna, which has no extra servo ports but adds a full receiver, to, with two antennas.
Spektrum Satellites, usually one Sat is one antenna, or Receiver plus Sat or Sat+Sat equal two.
On Satellites with two wires, one was 'just' part of the Dipol, not actually a second active antenna.
But I'm not familiar with current Spektrum tech, could be different with newer items.
VBar NEO or EVO (or even the receiver satellite) already have two active antennas, and for NEO or EVO, add one or two Extenders, add two or four active antennas.
Best,
Eddi
Born to fly ...
forced to work.
johnco61
27 July 2026 18:0427.07.2026 18:04
That's a great help Eddi, thanks. I didn’t realise you could do that, although the remote antenna seems to be out of stock everywhere at the moment. I can set it up and add one later, there's no rush.
Thanks again Eddi
Regards John