← VPlane / VBasic VLink

Airplane with two electric motors translated

VBar › VPlane / VBasic VLink · Started by 590423 on 29 April 2025 10:5229.04.2025 10:52
590423 29 April 2025 10:5229.04.2025 10:52
Hello,
Is it possible to build a twin-engine RC airplane with vbar neo?
Can two controllers be connected to one channel?
Thank you in advance for your feedback.
greeting
machine-translated from German · Show original
Eddi E. aus G. 29 April 2025 12:2629.04.2025 12:26
Hi,

Sure. Two via Y-cable to one channel (servo connection, channels are like 90s...).
Or both to one, and each outputting the same signal.
One could even crochet curves in between if the drives would otherwise not pull evenly.
Or integrate another sensor that can be used to similarly influence (virtually trim) the ratio.

Also 3-motor, 4-motor, n-motor (with 2 or three VBars, as far as the connections allow ^^).

Grüßle

EDdi

Born to fly ...
forced to work.
machine-translated from German · Show original
Fingolf 29 April 2025 16:3629.04.2025 16:36
Exactly - I also fly something like the Twinstar from time to time.
machine-translated from German · Show original
590423 29 April 2025 16:4029.04.2025 16:40
Thank you for the feedback.
greeting
Philippe
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless