← VPlane / VBasic VLink

JETCat Aux Channel translated

VBar › VPlane / VBasic VLink · Started by HeliFrank on 9 April 2025 22:4909.04.2025 22:49
HeliFrank 9 April 2025 22:4909.04.2025 22:49
Hi,

I've set everything up and it's working with the telemetry and the JetCat (thanks to your video ;-) ) (P130-RX-BL and JetCat Smoke Bus pump)

Now I'd like to connect a smoke pump as well. I think I've configured everything correctly, but in the GSU's RC check menu, I can see that the AuxPuls changes when I flip the 3-position switch, but the AuxImp(%) initially shows 0, and after flipping the switch once, it always shows 48.9%.

The Aux-Channel function is set to ON, TrbCtrl is set to OFF.

Any ideas what I can do?

Thank you!

Regards, Frank
machine-translated from German · Show original
RV 10 April 2025 17:4010.04.2025 17:40
Which ECU version is it?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
HeliFrank 10 April 2025 22:5710.04.2025 22:57
Hi,

It is an ECU V12.0
Regards, Frank
machine-translated from German · Show original
HeliFrank 11 April 2025 23:0511.04.2025 23:05
Hi,
Any ideas what else I could try?
Learning the system only works completely, and I had tried that before I saw your video, and it didn't work any better...
Thank you!
Regards, Frank
machine-translated from German · Show original
RV 12 April 2025 10:1612.04.2025 10:16
No, not at the moment.

I've contacted JetCat, but it will probably take some time. I do have a V12 here, but only the helicopter version.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Chriss 22 April 2025 18:4722.04.2025 18:47
Hello,

I'll join in too...

So, does that mean the smoker pump function is currently not possible with an Evo?

Kind regards
machine-translated from German · Show original
HeliFrank 29 April 2025 08:5729.04.2025 08:57
Hi,
Is there anything I can do?
Speak to JetCat yourself?
I don't currently understand exactly what the problem is.
Thank you!

With kind regards,
Frank Strupp
machine-translated from German · Show original
Eddi E. aus G. 29 April 2025 09:0129.04.2025 09:01
Hi Frank,

Why not contact them directly? You could refer to this and Rainer, and ask if they've already had a chance to look at it.

Perhaps they were on Easter break, or maybe the person who knows best...

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
RV 1 May 2025 20:0301.05.2025 20:03
So - I got my V12 PHT3 V2 test setup and checked it.

- When using MC, the AUX input must receive a maximum score of +/- 80 points from us for it to be interpreted as +/- 100 by JetCat.
- The AUX input itself works perfectly for switching RPMs.

Create a 3-level cell with the smoke switch and -80 / +80 max values.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 01.05.2025 20:06 von RV.

machine-translated from German · Show original
RV 4 May 2025 09:0104.05.2025 09:01
Here is some feedback from Roman Kulossek (JetCat):

Quote: I just tried it with a V12/P130-RX and successfully/without any problems got it working.

Therefore, please pay attention to the paths and also, if applicable, the ECU software version.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
HeliFrank 4 May 2025 19:0304.05.2025 19:03
Hi,
Great, it works for me now too: -80 / +80 max. as values :-)
Thank you!
Regards, Frank
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless