← VPlane / VBasic VLink

Surface programming translated

VBar › VPlane / VBasic VLink · Started by k.h.o.heli on 21 March 2026 14:0921.03.2026 14:09
k.h.o.heli 21 March 2026 14:0921.03.2026 14:09
Hello everyone,

In the "Area Mixer Setup" menu, I entered all the required values for CH01 Altitude; the deflections and directions are correct. However, when I exit the menu, the HR deflection changes.
How can that be?

Regards, Kurt
machine-translated from German · Show original
ulrich 21 March 2026 18:4821.03.2026 18:48
That's probably the trim setting. Try deleting the trim values.

So long... Uli
http://www.vstabi.de
machine-translated from German · Show original
k.h.o.heli 23 March 2026 18:5623.03.2026 18:56
Hi Uli,

I've already tried a few things, what's the correct way to proceed?
Background: the VBar NEO was in use in the helicopter; now I would like to...
I can use NEO in the surface model - new update and of course new
Setup: What do I need to consider?

Regards, Kurt
machine-translated from German · Show original
RV 23 March 2026 22:1323.03.2026 22:13
In the setup menu, the full deflection is set. In flight mode, the value is linked to the maneuverability. Just like in a helicopter ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
k.h.o.heli 26 March 2026 10:3326.03.2026 10:33
Thank you for the quick information.

Regards, Kurt
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless