← VPlane / VBasic VLink

Biplane with Evo Extender translated

VBar › VPlane / VBasic VLink · Started by Dirtygeri on 3 June 2026 10:3703.06.2026 10:37
Dirtygeri 3 June 2026 10:3703.06.2026 10:37
Hello Rainer!

I have a biplane and I've recreated your old "BiPlane-Crow" video. It works perfectly (of course) when I only connect one Vbar Evo. Unfortunately, I now need the AUX3 cell (aileron, right, up) as an Evo extender line because I need more channels (2 elevators + V-backup + lights)...

How can I bypass this or "redirect" AUX3, since I need the surface mixer expert menu? I've connected everything exactly as you showed in your video...

Thanks in advance! Best regards, Geri
machine-translated from German · Show original
Dirtygeri 3 June 2026 11:2203.06.2026 11:22
Addendum: How do you recommend connecting the second elevator servo? Simply to the extender with channel and FC elevator input, or is there a proven trick to ensure the butterfly mixing also works?
Thanks, Geri
machine-translated from German · Show original
RV 3 June 2026 12:2503.06.2026 12:25
Hi Geri,

So - I can help you with MC in principle - but I'm not an expert on fixed-wing aircraft - so when it comes to "how and why you control 1100 flaps" I'm out.

But - regarding point 1:

- Connect the corresponding servo to a free output on the extender.
- in the MC, a channel cell with input Chx is then added to this output (you'll have to test which one that would be, I mean Ch6).


Regarding point 2:
- if no more wing mixers are available:
- Set paths and center in Wingmix to full / 0
- Both servo outputs (master and slave) are equipped with a channel cell, input Ch2 I believe.
- Set the center and end positions until the tracking is synchronized.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Dirtygeri 3 June 2026 13:4003.06.2026 13:40
It fits perfectly - thank you so much, Rainer!
Best regards, Geri
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless