Kurvenkratzer
16 November 2019 19:4616.11.2019 19:46
I came across my helicopter today.
The only strange thing I could read in the log was...
YGE Setpoint noise
The controller is a YGE 205hvt with keto bec and the VBar neo VLink with VBar gov.
Perhaps someone here can help me....
Heute ist mir mein Heli untergekommen.
Das einzigste merkwürdige was ich aus dem Log herauslesen konnte war
YGE Setpoint noise
Als Regler ist ein YGE 205hvt verbaut mit keto bec und dem v stabi neo v link mit v stabi gov.
Vieelich kann mir hier jemand weiterhelfen....
RV
16 November 2019 22:3116.11.2019 22:31
Dann häng mal bitte das Fluglog und das UI Log hier an zum ansehen.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Kurvenkratzer
17 November 2019 09:3917.11.2019 09:39
I've copied these two logs from my cloud.
I hope this is correct, I've never used this before...
11/16/2019 1:44:40 p.m.; VBar Start -- KSE 700
16.11.2019 13:44:41 Good; Reset Reason: Power On
16.11.2019 13:44:41 Info; Bank 1 loaded
16.11.2019 13:44:41 Info; Bank 2 loaded
16.11.2019 13:44:41 Good; Engine switch neutral restart
16.11.2019 13:44:44 Info; Calibration complete
11/16/2019 1:44:48 PM Good; YGE ESC detected
16.11.2019 13:47:51 Info; Bank 2 loaded
16.11.2019 13:47:52 Info; Bank 3 loaded
16.11.2019 13:47:54 Info; Bank 1 loaded
16.11.2019 13:48:10 Info; Speed controller switched ON
16.11.2019 13:48:10 Good; Motor switch Motor On
16.11.2019 13:48:12 Info; Bank 2 loaded
11/16/2019 1:48:13 PM Warn;Low RPM: 643 RPM
11/16/2019 1:48:17 PM Info;Increased vibration level
11/16/2019 1:48:26 PM Info;YGE Setpoint Noise
11/16/2019 1:48:27 PM Info;Increased vibration level
16.11.2019 13:48:38 Error; Dangerous vibrations
16.11.2019 13:48:46 Error; Roll sensor is outside the measuring range
11/16/2019 1:48:46 PM Info; Bailout start
16.11.2019 13:48:47 Info; Off - Regulator - Umin: 46.2V Imax: 100.3A Temp: 33
16.11.2019 13:48:47 Warning; The cyclic ring is active
16.11.2019 13:48:47 Info; No signal from the speed sensor
16.11.2019 13:48:47 Warning; The cyclic ring is active
16.11.2019 13:48:47 Info; Speed controller switched to OFF
16.11.2019 13:48:47 Good; Motor switch Motor Off
16.11.2019 13:48:47 Warning; The cyclic ring is active
16.11.2019 13:48:48 Good; Engine switch neutral restart
16.11.2019 13:48:48 Warning; The cyclic ring is active
16.11.2019 13:48:48 Warning; The cyclic ring is active
11/16/2019 1:48:48 PM Info;Increased vibration level
16.11.2019 13:48:49 Warning; The cyclic ring is active
16.11.2019 13:48:49 Warning; The cyclic ring is active
16.11.2019 13:48:49 Warning; The cyclic ring is active
16.11.2019 13:48:49 Warning; The cyclic ring is active
16.11.2019 13:48:49 Warning; The cyclic ring is active
16.11.2019 13:48:50 Warning; The cyclic ring is active
16.11.2019 13:48:50 Warning; The cyclic ring is active
16.11.2019 13:48:50 Warning; The cyclic ring is active
16.11.2019 13:48:50 Info; Bailout End
16.11.2019 13:48:50 Info; Pilot bailout, oversteered
16.11.2019 13:50:22 Info; Bank 1 loaded
16.11.2019 13:50:22 Info; Speed controller switched ON
16.11.2019 13:50:23 Good; Motor switch Motor On
11/16/2019 1:50:25 PM Warn;Low RPM: 18 RPM
16.11.2019 13:50:25 Info; Off - Regulator - Umin: 48.5V Imax: 75.0A Temp: 25
16.11.2019 13:50:25 Info; Speed controller switched to OFF
16.11.2019 13:50:25 Good; Motor switch Motor Off
16.11.2019 13:50:26 Good; Engine switch neutral restart
16.11.2019 13:50:32 Good; Motor switch Motor Off
16.11.2019 13:50:33 Good; Engine switch neutral restart
16.11.2019 13:50:34 Info; Speed controller switched ON
16.11.2019 13:50:34 Good; Motor switch Motor On
16.11.2019 13:50:35 Info; Speed controller switched to OFF
16.11.2019 13:50:35 Info; Off - Regulator - Umin: 49.2V Imax: 0.0A Temp: 26
16.11.2019 13:50:35 Good; Motor switch Motor Off
16.11.2019 13:50:35 Good; Engine switch neutral restart
16.11.2019 13:50:58 Warning; The cyclic ring is active
16.11.2019 13:50:58 Warning; The cyclic ring is active
16.11.2019 13:50:59 Warning; The cyclic ring is active
16.11.2019 13:51:00 Warning; The cyclic ring is active
16.11.2019 13:51:00 Warning; The cyclic ring is active
16.11.2019 13:51:08 Warning; The cyclic ring is active
16.11.2019 13:51:09 Warning; The cyclic ring is active
11/16/2019 1:54:15 p.m.;VBar Logfile End -- 11/16/2019 -- 1:54:14 p.m
Ich hab hier mal die 2 Logs aus meine Claud Heraus kopiert.
Ich hoffe das ist so richtig, hab das zuvor nie benuzt ...
16.11.2019 13:44:40;VStabi Start -- KSE 700
16.11.2019 13:44:41 Gut;Reset Grund: Power On
16.11.2019 13:44:41 Info;Bank 1 geladen
16.11.2019 13:44:41 Info;Bank 2 geladen
16.11.2019 13:44:41 Gut;Motorschalter Leerlauf Durchstarten
16.11.2019 13:44:44 Info;Kalibrierung beendet
16.11.2019 13:44:48 Gut;YGE ESC erkannt
16.11.2019 13:47:51 Info;Bank 2 geladen
16.11.2019 13:47:52 Info;Bank 3 geladen
16.11.2019 13:47:54 Info;Bank 1 geladen
16.11.2019 13:48:10 Info;Drehzahlregler auf AN geschaltet
16.11.2019 13:48:10 Gut;Motorschalter Motor An
16.11.2019 13:48:12 Info;Bank 2 geladen
16.11.2019 13:48:13 Warn;Low RPM: 643 RPM
16.11.2019 13:48:17 Info;Erhoehtes Vibrationsniveau
16.11.2019 13:48:26 Info;YGE Setpoint Noise
16.11.2019 13:48:27 Info;Erhoehtes Vibrationsniveau
16.11.2019 13:48:38 Fehler;Gefaehrliche Vibrationen
16.11.2019 13:48:46 Fehler;Roll Sensor ist ausserhalb des Messbereichs
16.11.2019 13:48:46 Info;Bailout Start
16.11.2019 13:48:47 Info;Aus - Regler - Umin:46.2V Imax:100.3A Temp:33
16.11.2019 13:48:47 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:47 Info;Kein Signal vom Drehzahlsensor
16.11.2019 13:48:47 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:47 Info;Drehzahlregler auf AUS geschaltet
16.11.2019 13:48:47 Gut;Motorschalter Motor Aus
16.11.2019 13:48:47 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:48 Gut;Motorschalter Leerlauf Durchstarten
16.11.2019 13:48:48 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:48 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:48 Info;Erhoehtes Vibrationsniveau
16.11.2019 13:48:49 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:49 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:49 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:49 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:49 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:50 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:50 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:50 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:48:50 Info;Bailout Ende
16.11.2019 13:48:50 Info;Bailout vom Pilot Uebersteuert
16.11.2019 13:50:22 Info;Bank 1 geladen
16.11.2019 13:50:22 Info;Drehzahlregler auf AN geschaltet
16.11.2019 13:50:23 Gut;Motorschalter Motor An
16.11.2019 13:50:25 Warn;Low RPM: 18 RPM
16.11.2019 13:50:25 Info;Aus - Regler - Umin:48.5V Imax:75.0A Temp:25
16.11.2019 13:50:25 Info;Drehzahlregler auf AUS geschaltet
16.11.2019 13:50:25 Gut;Motorschalter Motor Aus
16.11.2019 13:50:26 Gut;Motorschalter Leerlauf Durchstarten
16.11.2019 13:50:32 Gut;Motorschalter Motor Aus
16.11.2019 13:50:33 Gut;Motorschalter Leerlauf Durchstarten
16.11.2019 13:50:34 Info;Drehzahlregler auf AN geschaltet
16.11.2019 13:50:34 Gut;Motorschalter Motor An
16.11.2019 13:50:35 Info;Drehzahlregler auf AUS geschaltet
16.11.2019 13:50:35 Info;Aus - Regler - Umin:49.2V Imax:0.0A Temp:26
16.11.2019 13:50:35 Gut;Motorschalter Motor Aus
16.11.2019 13:50:35 Gut;Motorschalter Leerlauf Durchstarten
16.11.2019 13:50:58 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:50:58 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:50:59 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:51:00 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:51:00 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:51:08 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:51:09 Warn;Der Zyklische Ring ist aktiv
16.11.2019 13:54:15;VBar Logfile End -- 16.11.2019 -- 13:54:14
Kurvenkratzer
17 November 2019 09:4117.11.2019 09:41
Und hier der Passende UI Log
16.11.2019 13:48:10;Date;I(A);U(V);(Q)mAh;Headspeed(rpm);PWM(%);Temp(C)
16.11.2019 13:48:10;0.4;50.1;19.0;18;0;19
16.11.2019 13:48:11;0.6;50.1;19.0;18;2;19
16.11.2019 13:48:11;1.3;50.1;29.0;105;5;19
16.11.2019 13:48:12;2.1;50.1;20.0;189;11;19
16.11.2019 13:48:12;3.0;50.0;20.0;323;13;19
16.11.2019 13:48:13;4.7;50.0;20.0;499;19;19
16.11.2019 13:48:13;4.6;50.0;21.0;643;23;19
16.11.2019 13:48:14;5.8;50.0;22.0;776;28;19
16.11.2019 13:48:14;7.3;49.9;23.0;885;31;19
16.11.2019 13:48:15;7.8;49.9;24.0;917;35;20
16.11.2019 13:48:15;9.0;49.8;25.0;1087;39;20
16.11.2019 13:48:16;9.9;49.8;26.0;1119;42;20
16.11.2019 13:48:16;12.1;49.7;28.0;1275;46;20
16.11.2019 13:48:17;13.6;49.6;30.0;1340;50;20
16.11.2019 13:48:17;18.1;49.5;31.0;1471;52;20
16.11.2019 13:48:18;17.5;49.5;34.0;1596;56;20
16.11.2019 13:48:18;18.6;49.4;37.0;1706;60;21
16.11.2019 13:48:19;16.5;49.5;49.0;1766;62;21
16.11.2019 13:48:19;15.9;49.5;41.0;1787;63;21
16.11.2019 13:48:20;41.5;48.8;45.0;1824;70;21
16.11.2019 13:48:20;51.2;48.4;53.0;1797;71;21
16.11.2019 13:48:21;9.4;49.5;55.0;1816;61;22
16.11.2019 13:48:21;16.1;49.3;57.0;1783;64;22
16.11.2019 13:48:22;66.4;48.1;61.0;1773;72;22
16.11.2019 13:48:22;73.9;47.8;69.0;1767;73;22
16.11.2019 13:48:23;23.4;49.0;72.0;1790;66;22
16.11.2019 13:48:23;56.4;48.2;78.0;1767;66;22
16.11.2019 13:48:24;64.6;48.0;72.0;1815;72;23
16.11.2019 13:48:24;41.0;48.4;87.0;1764;66;23
16.11.2019 13:48:25;72.9;47.6;95.0;1785;73;23
16.11.2019 13:48:25;43.7;48.3;101.0;1775;67;23
16.11.2019 13:48:26;75.6;47.5;109.0;1800;73;24
16.11.2019 13:48:26;39.6;48.3;113.0;1794;68;24
16.11.2019 13:48:27;37.4;48.5;120.0;1673;64;24
16.11.2019 13:48:27;37.2;48.2;126.0;1818;70;25
16.11.2019 13:48:28;35.9;48.2;133.0;1776;69;25
16.11.2019 13:48:28;9.0;48.8;144.0;1833;63;25
16.11.2019 13:48:29;73.8;47.3;151.0;1790;74;26
16.11.2019 13:48:29;31.9;48.2;156.0;1817;68;26
16.11.2019 13:48:30;57.5;47.5;165.0;1806;71;26
16.11.2019 13:48:30;62.0;47.4;165.0;1784;73;26
16.11.2019 13:48:31;42.7;47.8;183.0;1789;71;27
16.11.2019 13:48:31;35.6;48.0;189.0;1856;70;27
16.11.2019 13:48:32;32.4;48.0;193.0;1833;70;28
16.11.2019 13:48:32;5.7;48.8;196.0;1983;58;28
16.11.2019 13:48:33;58.4;47.5;199.0;1788;72;28
16.11.2019 13:48:33;11.6;48.5;207.0;1820;63;28
16.11.2019 13:48:34;30.3;48.1;215.0;1803;64;28
16.11.2019 13:48:34;75.9;47.1;218.0;1765;73;28
16.11.2019 13:48:35;59.0;47.4;224.0;1767;71;29
16.11.2019 13:48:35;66.2;47.2;239.0;1774;72;29
16.11.2019 13:48:36;10.7;48.6;232.0;1768;63;29
16.11.2019 13:48:36;58.6;47.4;236.0;1797;72;29
16.11.2019 13:48:37;15.3;48.5;241.0;1773;64;29
16.11.2019 13:48:37;11.7;48.6;243.0;1762;63;29
16.11.2019 13:48:38;16.1;48.5;244.0;1771;64;29
16.11.2019 13:48:38;35.8;48.0;251.0;1768;66;29
16.11.2019 13:48:39;27.3;48.1;251.0;1779;64;29
16.11.2019 13:48:39;16.2;48.3;262.0;1781;68;30
16.11.2019 13:48:40;87.4;46.7;269.0;1759;75;30
16.11.2019 13:48:40;45.1;47.5;279.0;1793;72;30
16.11.2019 13:48:41;100.3;46.4;290.0;1756;76;30
16.11.2019 13:48:41;8.4;48.3;298.0;1833;62;31
16.11.2019 13:48:42;58.2;47.1;305.0;1803;73;31
16.11.2019 13:48:42;48.5;47.2;314.0;1773;72;31
16.11.2019 13:48:43;98.5;46.2;323.0;1818;76;31
16.11.2019 13:48:43;62.0;46.9;330.0;1770;70;32
16.11.2019 13:48:44;88.8;46.3;340.0;1775;74;32
16.11.2019 13:48:44;81.8;46.4;347.0;1759;74;32
16.11.2019 13:48:45;28.0;47.9;352.0;1689;5;32
16.11.2019 13:48:45;6.4;48.2;353.0;1308;51;33
16.11.2019 13:48:46;7.8;48.2;355.0;1155;44;33
16.11.2019 13:48:46;7.3;48.7;359.0;453;16;33
16.11.2019 13:50:22;0.4;49.2;374.0;0;0;25
16.11.2019 13:50:23;0.3;49.2;374.0;13;1;25
16.11.2019 13:50:23;1.9;49.2;374.0;19;5;25
16.11.2019 13:50:24;2.8;49.2;374.0;21;0;25
16.11.2019 13:50:24;10.6;49.0;375.0;38;8;25
16.11.2019 13:50:25;75.0;48.5;381.0;0;0;25
16.11.2019 13:50:34;0.4;49.2;382.0;18;0;26
RV
18 November 2019 00:0018.11.2019 00:00
Jo - da kann ich erstmal auch net viel dazu sagen.
Wie war denn genau die Situation? - Denn der Setpoint Noise war ja ca. 20s vor dem Einschlag.
Bitte berichte mal genau.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Kurvenkratzer
18 November 2019 08:5818.11.2019 08:58
I'll try to reconstruct it.
While I was flying, the VBar started making noises, then I did a few tic-tocs and then the power was gone. And then the helicopter came down.
Yes, apart from the fact that the damage is already done, I don't want this to happen again.
What can I do to prevent this from happening again?
Ich versuch es mal zu rekonstruieren.
Als ich geflogen bin, hat die v bar Töne von sich gegebem dann hab ich grad paar tic tocs geflogen und dann war der saft auch weg. Und dann kam der Heli runter.
Ja ab gesehen davon das der schaden jetzt da ist. Will ich ja nicht das dies wieder passiert.
Was kann ich da den machen das dies nicht wi3der passiert ?
Kurvenkratzer
18 November 2019 09:0418.11.2019 09:04
Looking back, I suspect the sounds were meant to represent the error message (of course I don't know for sure).
All plugs etc. were connected - I checked.
The controller also started working again without any problems - I checked that too.
I disconnected the speed sensor and the engine continued to run.
I don't know of any mechanical or electrical fault that could have caused it.
I've never encountered this issue before, and I've been flying in several helicopters with Stabi gov for 4 years.
And I've never seen such a beep and error message before.
Nun um Nachinein, vermute ich mal das die Töne wohl die Fehlermeldung darstellten sollten (das weis ich natürlich nicht)
Stecker etc waren alle dran - Hab ich kontrolliert
Regler lief auch wieder problemlos an - hab ich auch kontrolliert
Drehzahl sensor hab ich abgezogen und der Motor lief weiter.
Also ich wüsste nicht das da mechanisch - elektrisch den fehler verursacht haben konnte.
Hatte diesen fall auch noch nie und flieg schon seit 4 jahren in einigen helis v stabi gov.
Und so ein Signalton und Fehlermeldung hatte ich auch noch nie gesehen
RV
18 November 2019 20:4818.11.2019 20:48
Das waren die Töne:
16.11.2019 13:48:26 Info;YGE Setpoint Noise
Da war m.M. nach der Strom weg:
16.11.2019 13:48:45;28.0;47.9;352.0;1689;5;32
Also 20s später.
Ich denke Du solltest ggf. mal YGE fragen was die Meldung zu bedeuten hat.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
RV
18 November 2019 22:2818.11.2019 22:28
Also ... der Setpoint Noise bedeutet ein gestörtes Gassignal am Eingang des Reglers.
Hast Du denn einen Verkabelungsplan des Ganzen?
Insbesondere wie sind die BEC's verhäkelt?
Warum wurde das KETO statt oder mit YGE verwendet?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Kurvenkratzer
19 November 2019 06:2619.11.2019 06:26
The 205 HVT does not have its own bec.
Hence the keto
I'll upload a schematic drawing here.
Edited once. Last edited on 19/11/2019 at 15:49 by Kurvenkratzer.
Der 205 HVT Hat kein eigenes bec.
Daher auch das Keto
Ich werd hier dann mal eine schematische Zeichnung hochladen.
1 mal bearbeitet. Zuletzt am 19.11.2019 15:49 von Kurvenkratzer.
Kurvenkratzer
19 November 2019 20:0619.11.2019 20:06
I've tried to draw the connection diagram here; I hope I haven't forgotten anything. The cable dimensions are approximate.
Since I am traveling for work, I cannot give you an exact figure.
Habs hier mal versucht das Anschlusschema aufzuzeichen , ich hoffe ich hab nix vergessen , die maße der Kabel sind ungefähre maße .
Da ich Beruflich unterwegs bin kann ich diese nicht exakt angeben.
JMalberg
21 November 2019 22:4821.11.2019 22:48
At what voltage does the Keto run?
How does the SBEC voltage behave in the Keto?
How is the signal line from the YGE to the Vstabi routed?
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Auf wieviel Volt läuft das Keto?
Wie verhält sich die SBEC-Spannung des Keto?
Wie ist die Signalleitung des YGE zum Vstabi verlegt?
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
Kurvenkratzer
22 November 2019 06:4322.11.2019 06:43
The Keto motor runs at 7.4V; I haven't monitored the voltage closely yet, as it's only been used for one flight. The cables were routed under the chassis to the rear and then upwards to the stabilizer. Completely standard...
Das Keto läuft auf 7.4v, Spannung hab ich noch nicht weiter beobachtet wurde erst 1 Flug benutzt. Die Kabel wurden unter dem chasie nach hinten und dann nach oben zum stabi verlegt. Ganz nornal....
Kurvenkratzer
23 November 2019 14:0223.11.2019 14:02
I've measured again... the cable from the BEC was
Soldered to + and - approximately 8 cm away from the regulator.
And the bec + - cable itself is approximately 18cm long from the soldering point to the Bec.
Ich hab nun nochmal nachgemesen... das Kabel vom Bec wurde
ca 8 cm vom Regler weg an + und - angelötet.
Und das bec + - Kabel selbst ist ca 18cm lang vom anläten bis Bec.
JMalberg
23 November 2019 16:2123.11.2019 16:21
My experience is that the Keto is somewhat "unsteady" at high voltages and doesn't hold the voltage as well as at lower voltages. Since then, I've been running it at 6V. But I can't say that this causes "YGE set point noise" or motor stalling.
The signal line might be affected if it runs directly alongside pulsating currents like the motor wires... possibly, maybe, could be. :-)
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Edited once. Last edited on 23/11/2019 at 16:23 by JMalberg.
Meine Erfahrung ist, dass das Keto in den hohen Spannungslagen etwas "unruhig" ist und die Spannung weniger gut hält als in den unteren Spannungslagen. Seitdem betreibe ich es bei 6V. Aber ich kann nicht sagen, dass damit "YGE Set Point Noise" oder ein Motorabsteller verursacht wird.
Die Signalleitung könnte unter Umständen vielleicht beeinträchtigt werden, wenn sie direkt an pulsierenden Strömen wie die Motorleitungen entlang läuft... eventuell, vielleicht, könnte sein. :-)
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
1 mal bearbeitet. Zuletzt am 23.11.2019 16:23 von JMalberg.
Kurvenkratzer
23 November 2019 19:4223.11.2019 19:42
I had already used Ketos in other helicopters but never had any problems.
The signal line from the YGE is actually only located next to the voltage line from the Keto and runs alongside it up to the stabilizer.
Ich hatte Ketos bereits bei anderen Helis in benutzung gehabt aber noch nie Probleme gehabt.
Die signalleitung liegt vom yge liegt eigentlich nur neben der Spannungsleitung vom Keto und läuft neben ihr zum stabi hoch.
Kurvenkratzer
18 December 2019 08:4218.12.2019 08:42
So, after a great deal of patience and quite a bit of time on the phone
Have I now "bought" a YGE 205 HVT with BEC?
I sent in the VBar and it has been checked so far.
The error definitely did not come from the stabilizer but was caused by the controller (in conjunction with the Keto bec).
However, Mr. Jung was less than accommodating, considering he himself had said that this could be the cause!
Despite repeated requests to include a section in his instructions stating that failures could occur when using an external BEC other than the r² prototyping BEC, he simply refused.
What's the point of a controller without a BEC if you shouldn't install any other BEC besides a €150 one because there's a possibility the controller might fail?
I had to pay an additional 100 euros, which I had negotiated down from 150 euros.
...to get the one with bec in exchange.
Leaving aside the additional damage of approximately 600 euros that I incurred...
Many thanks again to Mikado, great work!
Eddie E. Please correct me and the other readers if I know what the problem might have been (in the interaction between the controller and the external BEC).
A little more understanding and goodwill from Yge would have been desirable here. Oh well.
For me, the quick takeaway is no more external BECs and no more YGE ESCs, solely because of the goodwill issue...
Also nach sehr sehr viel geduld und einiges an zeit am Telefon
Habe ich nun einen YGE 205 HVT mit Bec "Gekauft"
Das V-stabi hab ich eingeschickt und wurde soweit überprüft.
Der Fehler kamm definitv nicht vom Stabi sondern wurde vom Regler Verursacht ( in verbindung mit dem Keto bec ).
Allerdings kam mir der Herr Jung weniger Kullant entgegen dafür das er selbst gesagt hat das es davon kommen kann !
Auf wiederholte anfrage doch bitte einen Textabschnitt in seine Anleitung zu bringen, das es in verbindung mit einem externen Bec auser das r² prototyping Bec zu ausfällen kommen könnte. Lehnte er einfach ab.
Was will man mit einem Regler Ohne BEC in dem man außer ein 150 Euro Bec kein anderes verbauen sollte weil eine Möglichkeit des austeigen des Reglers kommen "kann".
Ich musste jetzt noch 100 Euro draufzahlen die ich von 150 Euro Runtergehandelt hab.
...um den mit bec im tausch zu bekommen .
Der schaden von ca 600 euro den ich zusätzlich hatte mal abesehen...
Vielen Dank nochmal an Mikado super Arbeit von euch !
Eddie E. Bitte berichtigt mich bzw die Mitleser woran es evtl gelegen haben könnte ( im Zusammenspiel Regler und externes BEC )
Etwas mehr einsicht und Kulanz von Yge wäre hier wünschenswert gewesen. Aber gut.
Für mich lautet die Quickessenz kein externes Bec mehr und kein Regler von YGE alleine wegen der Kulanzgeschichte...