← VBar NEO/EVO VLink

No telemetry data on the Mini Vstabi translated

VBar › VBar NEO/EVO VLink · Started by Locke680 on 30 December 2019 08:2230.12.2019 08:22
Locke680 30 December 2019 08:2230.12.2019 08:22
Good morning,

I have a Mini Vstabi with satellite receiver in conjunction with the Vbar Control. It uses a YGE 65LVT ESC, which is connected to the RX1 port of the Vstabi via the YGE adapter cable.
I installed the YGE application on the Vbar Control.
I should now be seeing battery consumption and RPM displayed on the screen, but unfortunately it isn't.
Does anyone else have an idea?

Greetings
machine-translated from German · Show original
RV 30 December 2019 11:2130.12.2019 11:21
Das kann aufgrund etwas anderer Spannungspegelerwartung an einer Mini je nach Toleranzlage passieren.
Mit einer anderen "Altstabi" könnte das dann schon gut sein - je nach Toleranzen hier.

Bitte verwende sowieso am Besten eine NEO - dann kannst Du den Regler nicht nur auswerten sondern auch mit der VBC einstellen, das können die Alten Stabis eh nicht.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless