← VBar NEO/EVO VLink

Setup for Micro Helis translated

VBar › VBar NEO/EVO VLink · Started by Danny on 21 May 2026 19:0421.05.2026 19:04
Danny 21 May 2026 19:0421.05.2026 19:04
Hello everyone,

I have some questions about the setup for micro helicopters,

https://www.vstabi.info/de/tte_pro_tips

I've already read through it, but some questions remain unanswered.

What settings do I use for the Logo200 helicopter? Free helicopters only have classes starting at 450.

I discovered how to switch the rear end to motor position by accident; you have to hold the button down for a long time.
Then where can I find what is mentioned in the text:

Recommendation:

To largely avoid problems, we recommend using the presets we have developed through flight testing.

And where is the setting for:

Therefore, this V8 version has special settings, e.g. for XLPower or logo control.
Then there's TTE and preload.

Many questions have no answer, or I don't yet know where to find them.

It's really cool that the EVO can do all this and that there's a certain kind of open source in the form of a stabilizer for everything.

I would appreciate some information, or even better, an explanatory video with the old acquaintances.

What I've noticed is that RF offers an incredibly stable rear motor, presumably because it's controlled like a copter. External influences are irrelevant here.


BG
Danny



Edited twice. Last edited on 22.05.2026 at 20:05 by Danny.
machine-translated from German · Show original
RV 21 May 2026 22:5621.05.2026 22:56
Well, the Logo 200 is pre-tuned. I don't know if it would work on other microphones. Starting at 450 Hz, lowering the gain, and adding tail control would also be possible.

We don't know what you have at this point – and what the controller in your device can handle. Therefore, the helicopter manufacturer would be well advised to create a preset in cooperation with us.

The S2 setup is currently a bit more docile (it's mine) and would probably be a better starting point for unfamiliar helicopters. However, this only applies if the ESC supports the protocol configured in the S2 and the controller head has the same damping characteristics as my S2 here. Otherwise, you'll need to load the firmware and reduce the gain settings.

The L200/XL controller protocols are DSHOT variants – they are optimized specifically for the controllers used in these systems. I would recommend testing with other controllers using DSHOT1000 first.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 21.05.2026 22:57 von RV.
machine-translated from German · Show original
Danny 22 May 2026 20:0522.05.2026 20:05
Good evening, dear Reiner,

The controller is from the Logo 200, the helicopter is an OMP M2 exp. with the tail from the M2 Evo as well as the HRB. With the settings of the Logo 200 and the Mini Neo, the swashplate was already good, only the tail was bad. Now I want to try the whole thing with the EVO.

Where can I load your presets? Where are the mentioned settings for the logo slider, TTE, and preload? I can't find them in the menu.

Thank you.
BG
Danny



Edited once. Last edited on 22.05.2026 at 20:06 by Danny.
machine-translated from German · Show original
RV 22 May 2026 22:4722.05.2026 22:47
Do you have:

- a VBar EVO or micro EVO WITH the current V8 on the helicopter?
- a VBar Control touch or EVO with the latest V8 app?

Then it will be displayed under "new model," where there's a selection: Mikado new, Logo200. However, the preset won't work if the controller hasn't just been updated since the stream. The update only works if it already has telemetry.

If the controller has Tele but has NOT been updated => have it updated

I don't know how well the modified tail section on the helicopter will actually work.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Danny 23 May 2026 14:1323.05.2026 14:13
Vstabi Evo with 8.2
Vstabi Control EVO + up to date

I bought the controller from a dealer 5 months ago; it doesn't have telemetry.

I did manage to get the rear end working, controlling it like 333Hz 1500, but because of the old software on the ESC, DShot is probably not recognized.

I'll see tomorrow if it flies.

I'll try it out, thanks in advance.
BG
Danny
machine-translated from German · Show original
Danny 26 May 2026 19:3326.05.2026 19:33
Hello everyone,

What can I say? Maga flies with the EVO. What I don't understand is that I only have sensitivity set to 28 on the rear; anything above that causes vibrations.
But the rear end remains stable in every figure.

BG
Danny
machine-translated from German · Show original
RV 26 May 2026 20:2326.05.2026 20:23
Yes, see the V8 release notes for details. That's approximately 75 in the "old" gain setting.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless