← VBar NEO/EVO VLink

Kontronik Kosmik and Vstabi Blueline translated

VBar › VBar NEO/EVO VLink · Started by Firefly on 20 August 2026 09:2020.08.2026 09:20
Firefly 20 August 2026 09:2020.08.2026 09:20
Hello everyone,

I have the following problem with my Vstabi Blueline V6 with Vsat.
Specifically, when I connect the Kosmik 250HV with its integrated telemetry output, the Vbar Control connects, but the connection immediately drops again. This happens repeatedly, and the discharge protocol essentially locks the Vbar's screen.

Is this a problem with the older Blueline models?
I had the Neo on before and that wasn't a problem.
machine-translated from German · Show original
RV 20 August 2026 18:1620.08.2026 18:16
Older stabilizers are no longer supported by current controllers (implementation has been gradual since the introduction of NEO, depending on the ESC firmware). It uses a different protocol/handshake and has been removed.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 20.08.2026 18:16 von RV.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless