← VBar NEO/EVO VLink

Power backup and pass-through of YGE telemetry/RPM translated

VBar › VBar NEO/EVO VLink · Started by Milindur on 26 August 2026 22:4526.08.2026 22:45
Milindur 26 August 2026 22:4526.08.2026 22:45
Good morning,

I'm currently building an XLPower Specter 700 V2 Ultimate. The VBar EVO will be mounted on the rear platform, and the YGE Aureus 135 on the front ESC platform. The Power Backup would also be a convenient option for the front, under the ESC. I've noticed that the Power Backup allows for telemetry pass-through and also includes a servo signal wire in addition to the power supply. I'm considering connecting the YGE telemetry via an adapter cable to the Power Backup daisy chain port and sending the RPM signal through the Power Backup's servo signal. It seems the Power Backup doesn't process the servo signal; it simply passes it through end-to-end.

1. Would that work?
2. Could there be any problems with this procedure that I'm overlooking, for example, in case of an error, if ESC fails and the backup is needed?

Is it okay to mix the ESC telemetry with the power backup telemetry? The VBar governor uses the RPM signal for its control. So, if the ESC telemetry is slower because it shares a line with the power backup, that wouldn't have any effect, right?

Thank you and best regards
Christian

Best regards
Christian
machine-translated from German · Show original
RV 26 August 2026 23:4326.08.2026 23:43
That should work, you can do it that way. RPM has never been tested this way – but it doesn't really matter, the connection is there.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless