← VBar NEO/EVO VLink

VBar Evo with RAW 700 problem - please help translated

VBar › VBar NEO/EVO VLink · Started by Tgilf on 18 October 2026 12:2018.10.2026 12:20
Tgilf 18 October 2026 12:2018.10.2026 12:20
Hello everyone!
I'd like some advice from the experts. I've built my RAW 700 with the following components:
Scorpion HK-4526-520KV
Scorpion Tribunus III 14-150A regulator
Vstabi EVO 8.2
Vstabi Governor

First flight: hovering and testing without problems, slight pitching (1500 rpm). On the second takeoff, the rpm was increased to see if the pitching would disappear (1700 rpm). This resulted in a sudden drop in rpm and then the behavior that can be heard in the linked video (without the blades).

https://youtu.be/mO8Thua8D00

Does anyone have any ideas? Is it a mechanical problem? Or a setting issue?

I would be very grateful for any help. Thank you and best regards.

Tom
machine-translated from German · Show original
RV 18 October 2026 13:5218.10.2026 13:52
Is the setup and log from the aforementioned flight, the test run, and possibly a slightly longer test run in the cloud?

Serial number VBCt/E and stabilizer?
What does the log say?
What does the UI curve say?
What is the government's configuration?

Note: Do NOT compare to the uncontaminated state - this can be misleading!

BUT: If it sounded like that and the RPM was gone... it could also be something mechanical that's slipping (control unloaded then) - like being on the ground without leaves.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




2 mal bearbeitet. Zuletzt am 18.10.2026 13:53 von RV.
machine-translated from German · Show original
Tgilf 18 October 2026 14:2518.10.2026 14:25
Thanks for the reply.
The flight is in the cloud, serial number VBCt: 11008304 and EVO 27012108
The flight was at 10:31

Regarding your question about the configuration, I have attached photos.

I would be really happy if we could find a solution here.



Edited once. Last edited on 18/10/2026 at 14:32 by Tgilf.

machine-translated from German · Show original
Tgilf 18 October 2026 14:2618.10.2026 14:26
another picture

machine-translated from German · Show original
RV 18 October 2026 17:1318.10.2026 17:13
At the end of the flight log (UI, graphical), it can be seen that the speed control has some kind of problem.

In my opinion, it's indicating a higher RPM than is actually being displayed. However, there's a loose connection somewhere.

In your UI log, when a TELE ESC is present, the ESC RPM TELE value is logged, NOT the RPM input.

It would be interesting to have both values. At the moment, I suspect that the RPM input to the stabilizer might not be correct, for example, due to a loose connection causing more pulses than intended.

Do the following:

- 2 test runs on the ground, but longer than in the other runs, I also want to see something.
- 30 seconds as the helicopter is now
- Deploy telemetry
- 30 seconds without TELE (because then RPM is written to the UI log)

If a Pro App were available on the VBC, both could be written to the user-defined log and compared directly ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 18 October 2026 17:2818.10.2026 17:28
Thank you. The test on the ground with leaves?
machine-translated from German · Show original
RV 18 October 2026 17:4318.10.2026 17:43
You can do it without. The important thing is not to change the pitch stick between runs.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 18 October 2026 17:5818.10.2026 17:58
Thank you. Unfortunately, I can only do that tomorrow.

But perhaps your considerations have already provided the solution?
The RMP cable was more than loose on the controller… could that be it?

Best regards
machine-translated from German · Show original
RV 18 October 2026 18:0018.10.2026 18:00
Ahhh... that's what I suspect! Maybe it's a loose connection...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 19 October 2026 18:5219.10.2026 18:52
I still let it run on the floor for the 30 seconds you requested.

It seemed normal to me again, without any fluctuations. Then, during the second run, I disconnected the telemetry. I can't see the RPM in the log :-(
Maybe I do need the Pro app after all :-) ?

Do you think that was it?
machine-translated from German · Show original
RV 19 October 2026 19:5619.10.2026 19:56
Ah - my mistake! - Sorry - it's simply not possible without your own log.

But... take a look at the model status during a test run. Right at the bottom is the RPM reading from the RPM sensor ;-) - If it doesn't fluctuate or drop out, that's it!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 19 October 2026 20:3519.10.2026 20:35
I will. Either way: Thank you so much for your consistently constructive help and quick replies. That's truly exceptional!!
machine-translated from German · Show original
Tgilf 31 October 2026 11:4231.10.2026 11:42
Hello Rainer.
I solved the cable problem thanks to your help.

Now I have another question:

Why am I experiencing such significant drops in RPM? I'm using the Vstabi Governor.
See log from the last flight.

I would really appreciate your help.

Thanks.
Tom

machine-translated from German · Show original
RV 31 October 2026 21:4831.10.2026 21:48
Upload the setup to the VBC and let me know when it's on the cloud.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 1 November 2026 09:1701.11.2026 09:17
It's in the cloud. Thanks.

RV wrote:
-------------------------------------------------------
> Upload the setup to the VBC and then say
I'll let you know when it's on the cloud.
machine-translated from German · Show original
RV 1 November 2026 09:3501.11.2026 09:35
It looks to me like you have far too little pitch adjustment on the controller. It's too flat; the motor stutters when you pitch up, and you get overspeed when you de-pitch.

It's set to 6 - try setting it higher, more like 20.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 1 November 2026 12:4001.11.2026 12:40
Hello Rainer.
Thanks. I increased it to 20. It feels a bit better, but the RPM and, strangely, the throttle opening also decrease simultaneously under load (see log).

01.11.2026 09:46:56

Especially on bank 3 (2000rpm) it dropped to a scary 1560.

Is it possible that the throttle/controller opening is incorrect despite the Scorpion telemetry? It shows a throttle of 100, but according to the log, the controller opening is only around 80.

I then tried to calibrate the controller and set the endpoints. As a result, all telemetry has now disappeared and Scorpion no longer appears in the menu.

I hope it's a settings issue and not a mechanical one.
Thank you so much

Tom
machine-translated from German · Show original
RV 1 November 2026 16:5601.11.2026 16:56
Quote: I then tried to calibrate the controller by setting the endpoints.

Why? - Nobody needs this anarchic methodology anymore since we have our telemetry. We've specified the procedures for everyone, and anyone who wants to use our telemetry has to do it that way.

Normally, the controller has an auto-detect function, meaning it should recognize our Telecaster if we ping it after turning it on. If it no longer does this, check with Sco PC Soft whether Mikado is selected.

Perhaps the Scorpion controller is in the wrong mode?

How exactly was VGov mode set, and when and where?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 2 November 2026 20:3702.11.2026 20:37
Probably out of desperation :-)
I switched it back from "Airplane" to Vbar in the Sproto software. And as you can see in the screenshots, the controller is now recognized again.
Should I try again? Increase the pitch enhancement even further?

How do you explain the opposing fluctuations in the log for controller opening and RPM?

Thanks

machine-translated from German · Show original
RV 2 November 2026 21:0502.11.2026 21:05
Quote: How do you explain the opposing fluctuations in the log for controller opening and RPM?

That we're always "too late." That's why we increased the feedforward control. Perhaps the controller wasn't in VGov mode and was operating in "normal" mode. What does the Scorpion app show?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 2 November 2026 21:2102.11.2026 21:21
Thank you. The app displays "Vstabi speed controller".
Could it be due to the switching limits of the controller? I had entered 0 for both volts and amps.
I've now changed it to 150A and 36V…
machine-translated from German · Show original
RV 2 November 2026 21:2402.11.2026 21:24
Quote: Could it be due to the switching limits of the controller? I had entered 0 for both volts and amps.

No idea - you'd have to ask Scorpion.

Just try it out as suggested.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 5 November 2026 13:0505.11.2026 13:05
Quick feedback:
I defined the following cutoff limits for the controller: 200A, 36V, and 4000mAh. So, quite generously sized. Once reconfigured, it works now – see the last log.

Thanks!
machine-translated from German · Show original
RV 5 November 2026 20:5305.11.2026 20:53
Great!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless