← VBar Control Touch / EVO

Telemetry for Hobbywing esc for V6 mini V bar.

VBar Control › VBar Control Touch / EVO · Started by ChrisB on 30 October 2026 15:0830.10.2026 15:08
ChrisB 30 October 2026 15:0830.10.2026 15:08
Was running an Evo on V8 with Hobbywing esc using telemetry no issue.
I have purchased a Mini V Bar and set it all up Ok but plugging the 2 pin telemetry cable into a side port on fbl unit gives no telemetry on Touch , should it be there please?
ChrisB 30 October 2026 15:1030.10.2026 15:10
Duplicate.



Edited 1 time(s). Last edit at 10/30/2026 03:10PM by ChrisB.
RV 30 October 2026 21:3030.10.2026 21:30
The telemetry was way back in the past developed for old VBars. But when starting NEO (and now EVO) we designed bidirectional functions and a different handshake.

So - some ESC firmwares may have still implemented both versions - but newer ones don't.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
ChrisB 31 October 2026 08:2231.10.2026 08:22
Thanks Rainer
ChrisB 31 October 2026 18:0131.10.2026 18:01
Will be keen to see how my Logo 550 SE feels on V6 compared to Evo and V8, for me I expect not much difference , your previous software and hardware was class leading anyway.
Eddi E. aus G. 2 November 2026 09:3302.11.2026 09:33
Hi Chris,

one thing you might want to check: if that legacy VBar was used with Spektrum before, make sure it's not any more.
Might have to check by reverting to 5.3 (Recovery, get license key, load 5.3, check/change to something different than Spektrum, using computer software), then go back to 6.0, load your previously saved setup again or do a new one again.
The Macrocell implementation (Expert AUX in olde VBar speak) was very rudimentary, on legacy devices, so there's afaik no I/O Configuration menu like on NEO/EVO.

Could be that I'm on a wrong track, so it could be time wasted :-)
And please also try both Telemetry ports (RX-1/2).

Last thing, or maybe first, the signal Pin on RX C is also a receiver input, shared with one of the lateral ports (used with other bus or single line receivers), you could also try that, because they double as the telemetry ports (also connect ground, for reference ... and don't mess it up ^^).

Very lastly, could be that the signal gain from the ESC is not sufficient for the legacy VBar, here a Mikado telemetry item in between (as a signal booster) could help. But that could prove to be difficult, particularly on a very small heli.

Best,

Eddi

Born to fly ...
forced to work.



Edited 1 time(s). Last edit at 11/02/2026 09:34AM by Eddi E. aus G..
ChrisB 2 November 2026 10:1602.11.2026 10:16
Great info and really appreciated Eddi, will try.
Eddi E. aus G. 2 November 2026 11:0502.11.2026 11:05
Hi Chris,

oh, and the one-more-thing:

_If_ any other signal wire is connected to RX C, this may or will interfere with the satellite-now-telemetry-ports, _because_ they double.
So _maybe_ it's just that, and you can skip all the other ideas.

Cheers

Eddi

Born to fly ...
forced to work.
ChrisB 3 November 2026 15:0303.11.2026 15:03
Thank you.
ChrisB 4 November 2026 17:4804.11.2026 17:48
Nothing seems to have worked so will go with standard timer.
Thanks for all advice though. :-)
VStabi VStabi Pioneer of Flybarless