← VBar Control Touch / EVO

RC voltage reading too high + no BEC current log translated

VBar Control › VBar Control Touch / EVO · Started by Falo on 11 October 2026 22:4011.10.2026 22:40
Falo 11 October 2026 22:4011.10.2026 22:40
Hello,

After setting up the Pro apps, I encountered two problems on one setup (Goblin 380 (EVO, YGE-65 LVT - latest firmware)):

1. The output RC voltage (~8.46V) is about 0.1 volts higher than the actual BEC voltage (~8.36V, set to 8.4V). The old VBar Control had a way to correct this. I can't find this option on the Touch. How can I fix this, or why is there such a large discrepancy?

2. In my own Data Log Pro, I want to display the BEC current. Even during setup (where live data is already displayed), it always shows 0.0A, despite significant movement of both sticks. The graph then shows 0.1A for the entire recording period. Everything is fine with my other two helicopters (YGE Saphir 155+NEO & Aureus 135+EVO).

Here are some pictures of both...

Greetings

Olaf

machine-translated from German · Show original
RV 11 October 2026 23:0511.10.2026 23:05
Well, the voltage reading might have some tolerance. If it's 0.1V out of 8.4V, that's a tolerance of just over 1% – which is very good considering it's not a calibrated precision instrument.

With older stabilizers, we had a parameter in the stabilizer that could be corrected because the readings from the 2s servos differed too much, as the measuring device was originally designed for 6V.

For NEO/EVO with VBC touch/EVO, this is accurate enough for our purposes with the aforementioned tolerance.


Because of BEC power - the "small" 65 can't do that, as far as I know, it simply doesn't transmit anything to us.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 12 October 2026 09:0912.10.2026 09:09
Good morning,

Just out of curiosity, what happens when you measure at the BEC with nothing else connected, only the flight battery?

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Falo 12 October 2026 14:5612.10.2026 14:56
So it's 8.38V!

machine-translated from German · Show original
Eddi E. aus G. 13 October 2026 09:1013.10.2026 09:10
8.45/8.38*100=100.835
8.38/8.45*100=99.172

Hi, depending on how you calculate it, but always less than 1% ... good enough.

Rainer had also raised the heretical question: Is the multimeter calibrated?

:-)

I just compared the lab power supply and multimeter here, 8.42 V to 8.39 V... both were probably calibrated when they were new (and probably weren't identical to the second decimal place even back then...), but that was a long time ago... also, good enough.

Before we start on that, Hobbywing could gladly 'find' a few hundred mAh per flight :-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Falo 13 October 2026 11:0913.10.2026 11:09
It's all ok, :-)

I didn't want to make a fuss about it.
I probably should have left out the picture of the multimeter. 8-)
The YGE app shows yet another, even smaller value. And it works (better) on my other two helicopters (also with YGE).
Having so many (telemetry) values is both a blessing and a curse.

And in the old VBar there was the option of a correction factor, which I actually searched for in vain in the Touch version.
It's a shame it's no longer available. But maybe you'll put it back in sometime.
machine-translated from German · Show original
Eddi E. aus G. 13 October 2026 11:3313.10.2026 11:33
No, everything's fine, we all learn from things like this. And... nice multimeter :-) all good!

With the older VBars, the measurement variation was significantly larger (actually good enough, but ...), so it made sense, especially if you wanted to fly with a receiver battery and warning system 'as was common practice in the past'.

Here, exactly enough :-) and with a BEC that only helps to a limited extent anyway, I don't see the very short sharp spikes in the relatively slow and smoothed display anyway, and the BEC doesn't decrease as the battery gets emptier, but rather it just does, ... doesn't do (anymore).

And if that fails, hopefully I have a buffer or backup battery or power backup (which reports itself), and if I really need it, I've set a trigger to a lower voltage.

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Falo 13 October 2026 12:3013.10.2026 12:30
:-) Yes, and that's exactly the reason for this whole story.

I had a low voltage warning on my 700 (from the YGE) and then I checked the log: > Message from VBackup (186 mAh consumed). That seemed a bit high to me.
Therefore, I simply wanted to log the BEC voltage curve (for all helicopters at once)...


But I do have one more question about VBackup, even though it doesn't quite fit here.
Under "Advanced Settings > Standby Voltage > Alarm Threshold" you can't actually adjust anything, can you?
The help text suggests otherwise, but I think the appropriate values are automatically selected. In my case, the fields/buttons are definitely non-functional.
machine-translated from German · Show original
RV 13 October 2026 17:5013.10.2026 17:50
The buttons are one-shot – they send the signal, but you can't see what's currently set.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
flydown 13 October 2026 21:1313.10.2026 21:13
Eddi E. from G. wrote:
-------------------------------------------------------

Before we start there, Hobbywing is welcome to have a
> Find a few hundred mAh per flight :-)
>
> Greetings
>
> Eddie


That was good.
I have something new on this topic, but it's nothing helpful. Should I? There then.

Greetings, Uwe
machine-translated from German · Show original
Eddi E. aus G. 14 October 2026 09:2714.10.2026 09:27
Hi Uwe,

Feel free :-) Good entertainment shouldn't be neglected either ^^

Of course, always, as long as it remains objective ;-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless