← VBar Control Touch / EVO

Mikado Power Backup with additional capacitor

VBar Control › VBar Control Touch / EVO · Started by Radek on 24 January 2026 14:2924.01.2026 14:29
Radek 24 January 2026 14:2924.01.2026 14:29
Hi guys
In which scenario is recommended to use an additional capacitor in combination with the Mikado Power Backup or you should always use one?



Edited 1 time(s). Last edit at 01/24/2026 05:15PM by Radek.
RV 25 January 2026 18:4525.01.2026 18:45
There is only one scenario ... having servos with really bad reverse current you can add a 4700uf directly in addition.

But - consider you are curing an effect, not the reason here - so better don't use such servos.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Radek 26 January 2026 11:4226.01.2026 11:42
Hi Rainer and thank you for your answer.
That’s exactly what i think. Because power backup already is and acts as capacitor correct?
Just this FB post is quite interesting. I understand that some esc makers want you to install capacitors to the system and even supply one. But since using power backup already isn’t bit unnecessary? Besides it will occupy additional port on a receiver. What do you think? Thank you Radek

Eddi E. aus G. 26 January 2026 13:2226.01.2026 13:22
Hi,

Power Backup is designed with the purpose to provide emergency power in case the main r/c power supply fails, and to support a weak main power supply with its buffer's juice.
To a certain extent, it also buffers reverse voltages.

But a simple capacitor connected directly to the power rail does that, real time.

So like Alex said in his post, AND is key if you want both.

Oh, and Power Backup doesn't actually occupy a port, you can always connect something else to it's own pass-through servo connector.

Best,

Eddi

Born to fly ...
forced to work.



Edited 1 time(s). Last edit at 01/26/2026 01:23PM by Eddi E. aus G..
VStabi VStabi Pioneer of Flybarless