← VBar Control Touch / EVO

Switch no 2 disassembled itself

VBar Control › VBar Control Touch / EVO · Started by Jonny on 31 December 2025 18:2131.12.2025 18:21
Jonny 31 December 2025 18:2131.12.2025 18:21
Hi.

My switch number 2 disassembled itself today, so i must replace it. (See attached image)

is this item no. 04978 from the mikado shop?

Also i see that our reseller also have a switch with the same item number from mikado, but according to the image on the web page this have a circuit board for braking out the wires.

Can i also use this part, or will it not fit?
rcpro switch

RV 31 December 2025 20:0231.12.2025 20:02
You can - we changed from board to boardless a few years ago - but the function is the same.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless