← VBar Control Touch / EVO

Set an alarm for a switch in/out of a position during startup, Macrocell?

VBar Control › VBar Control Touch / EVO · Started by sherer46 on 2 December 2025 07:5802.12.2025 07:58
sherer46 2 December 2025 07:5802.12.2025 07:58
I'm using an XDfly backup capacitor pack, I have it activated via switch 3/option 1, plugged into the Aux 1 port on an EVO. I would like to know if there is a macrocell I can set up that when the Vcontrol Evo is turned on, I'm notified that the switch is an inactive or active position. I used to have it set up on my motor safety switch, but I would prefer to have it where it is. Sometimes I like to disconnect the flight battery and still have the ability to adjust some parameters on the model without the risk of a spool-up.
Thanks
Eddi E. aus G. 2 December 2025 09:2702.12.2025 09:27
Hi,

as of yet, I think not.

The only automatic warnings for now are for the motor switch, and if you were using the Modify parameters App (here the transmitter bring sup a screen if the rotary inputs are not approx. at center, which could be a disadvantage if you had a relative function (trim for example) on such an input, and if it was at full deflection already.

Kind regards

Eddi

Born to fly ...
forced to work.



Edited 1 time(s). Last edit at 12/02/2025 10:35AM by Eddi E. aus G..
RV 2 December 2025 10:1902.12.2025 10:19
Did you read the news?

There is a new MC ....

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 2 December 2025 10:3502.12.2025 10:35
Hi,

I read the news, but the news don't say what it does, and I didn't find the time to try it out yet :-)

So OP, disregard my first post, update your transmitter, try the Macrocell 'Latch', please :-)

—Eddi

Born to fly ...
forced to work.



Edited 1 time(s). Last edit at 12/02/2025 10:36AM by Eddi E. aus G..
ulrich 2 December 2025 12:3202.12.2025 12:32
We totally missed to demonstrate this in our stream ;-) , but the Help for this Celltype may explain what is does for now. Nore to come...

so long ... Uli
http://www.vstabi.de
VStabi VStabi Pioneer of Flybarless