← VBar Control Touch / EVO

Jetcat app settings translated

VBar Control › VBar Control Touch / EVO · Started by WFEGb on 5 November 2026 16:5305.11.2026 16:53
WFEGb 5 November 2026 16:5305.11.2026 16:53
Hello,

"Never change a running system..." would certainly have been better heeded, but...

After a few changes in the cockpit, the PHT2 always started up immediately for cooling because the ambient temperature was over 300°C. Simply recalibrating the temperature didn't change anything. Perhaps the sensor is faulty? I'd try resetting the turbine first.

The question then arises: Are the values from the Jetcat app directly synchronized with the turbine's ECU, thus eliminating the need to teach in RC pulses, pump start-up voltage, and temperature, or do these steps still need to be performed?

Best regards
Werner
machine-translated from German · Show original
RV 5 November 2026 21:0605.11.2026 21:06
The path-learning process has been something only for old-fashioned canal-thinkers for over 10 years.

Whether it's a controller or a turbine - if it has telemetry with us, that's agreed upon by both sides.

Regarding the app: We display what's stored in the ECU and immediately forward any changes to it. Therefore, nothing is saved on our end. So, note the settings before resetting and then reconnect them afterwards.

But – the EGT is a Seebeck element. Perhaps there's something wrong with the electrical connection via the chassis to the turbine electronics? What exactly was changed/removed/rebuilt?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
WFEGb 6 November 2026 01:4506.11.2026 01:45
Hello Rainer,

Receiver and turbine batteries replaced, new jumper socket for battery Neo, external blue sensor removed, balancer and charging socket as well as LED I/O interface (inside the housing) relocated, ERNI cable replaced, telemetry cable for ECU Neo extended, Unilight module glued to a different location.

I haven't reconnected the onboard RC charger yet.

"Actually" a lot of fiddling but nothing essential... I thought...

Best regards
Werner



Edited once. Last edited on 06/11/2026 at 01:47 by WFEGb.
machine-translated from German · Show original
RV 6 November 2026 07:0806.11.2026 07:08
Okay - I would unplug the EGT sensor and see what it displays. Then plug it back in. Maybe it's just a loose connection or something.

If necessary, you can also test the sensor by briefly "coughing" on it with a lighter.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
WFEGb 7 November 2026 02:2107.11.2026 02:21
Hello Rainer,

Thank you so much for your tireless and quick replies! (This also applies to Eddi in the other thread.)

I still have a bit of uncertainty. After several attempts at temperature adjustment and resets, I finally managed to get a "proper" reset using your lighter coughing suggestion. The room temperature is finally showing 21°C again, after initial attempts displaying values like 360°, -42°, and 98°. I'm curious to see if it will still be showing this temperature when I check it tomorrow, and perhaps there will be another opportunity to test it during the run this year...

Have a nice weekend and best regards
Werner
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless