k.h.o.heli
17 September 2026 15:0417.09.2026 15:04
Hello everyone,
During my last flight, I received an audible warning from the transmitter, according to the log data:
YGE controller current limit reached. A 205 HVT is in use at 12S (il Goblin 700 KSE).
I hadn't received that information before. The helicopter was flying very erratically and the RPM was changing.
Perhaps someone can help me?
Thank you
Regards, Kurt
Hallo Zusammen,
beim letzten Flug bekam ich eine akustische Warnung vom Sender, lt. Logdaten:
YGE-Regler Stromlimit erreicht. Im Einsatz ist ein 205 HVT bei 12S (il Goblin 700 KSE).
Diesen Hinweis hatte ich noch nicht. Der Heli flog sehr unruhig und die Drehzahl änderte sich.
Vielleicht kann mir jemand helfen?
Vielen Dank
Gruß Kurt
RV
17 September 2026 22:0617.09.2026 22:06
Well, since we're just the messengers, and the message itself is coming from the controller, you should probably check the settings in the "Limitations" window of the YGE app. There should be a value there that can be explained somehow.
By the way... flying blind here since there's no VBC or stabilization serial number => no log to view. Please make sure that's in the cloud and post the serial number here ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Nunja - da wir nur die Überbringer der Botschaft sind, diese aber vom Regler kommt müsste man vielleicht mal die Einstellungen im "Begrenzungen" Fenster der YGE App nachsehen. Da sollte dann ein Wert stehen der sich irgendwie erklären lässt.
BTW ... Blindflug hier da keine VBC und Stabi SN => kein Log zum einsehen. Sieh mal bitte zu dass das in der Cloud ist und schreib die SN hier ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
k.h.o.heli
18 September 2026 13:1918.09.2026 13:19
Hello Rainer,
Here are the details: VBar Control touch / Evo 11004236
VBar Evo (VLink) 27003756
Log data: Start 15.09. 13:53
Regards, Kurt
Hallo Rainer,
hier die Angaben: VBar Control touch / Evo 11004236
VStabi Evo (VLink) 27003756
Logdaten: Start 15.09. 13.53 Uhr
Gruß Kurt
RV
18 September 2026 14:2818.09.2026 14:28
Please provide further information; this question has not been answered.
Quote: Well, since we're just the messengers, and the message itself comes from the controller, you should probably check the settings in the "Limits" window of the YGE app. There should be a value there that can be explained somehow.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 18.09.2026 14:29 von RV.
Bitte nachliefern, das wurde nicht beantwortet:
Quote:Nunja - da wir nur die Überbringer der Botschaft sind, diese aber vom Regler kommt müsste man vielleicht mal die Einstellungen im "Begrenzungen" Fenster der YGE App nachsehen. Da sollte dann ein Wert stehen der sich irgendwie erklären lässt.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 18.09.2026 14:29 von RV.
k.h.o.heli
19 September 2026 11:2919.09.2026 11:29
Hello Rainer,
Here are screenshots from the YGE app.
Thank you very much for your help!
Regards, Kurt
Hallo Rainer,
hier Screenshots von der YGE-App.
Vielen Dank für Deine Hilfe!
Gruß Kurt
RV
19 September 2026 15:2419.09.2026 15:24
So, if you look at the graph in the cloud, it looks pretty weird.
Things get chaotic with PWM and current - but never exceed the set value.
However... since the controller also monitors the phase currents internally, this entry could also be due to that.
I would check the wiring between the controller and the motor, and also check the motor for insulation faults between two phases. Something about the above looks very suspicious.
If that's OK - if necessary, contact YGE, perhaps the colleague there has an idea what's going on.
If necessary, one could also perform a cautious test flight to see if it recurs.
Regards (EN) / Greetings (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Please use a PC and a proper keyboard for posts and replies, and answer all questions completely. Take your time and answer follow-up questions thoroughly and completely.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For individual communication, please use email exclusively ! - Private messages, messenger, chat, etc. will not be processed.
For single user communication please send an email only ! PM, Messenger, Chat etc. won't be read.
Also - wenn man sich den Graph in der Cloud anschaut sieht das recht weired aus.
Da gehts dann drunter und drüber mit PWM und Strom - aber nie über den eingestellten Wert.
Aber ... da der Regler auch intern die Phasenströme monitort könnte dieser Eintrag auch daher kommen.
Ich würde mal die Verkabelung Regler-Motor prüfen und den Motor auf Isolationsfehler zwischen 2 Phasen checken. Irgendwie sieht das o.g. sehr verdächtig aus.
Wenn das OK ist - ggf. mit YGE Kontakt aufnehmen, vielleicht hat der Kollege dort eine Idee was da los ist.
Ggf. könnte man auch einen vorsichtigen Testschweber machen um zu sehen ob sich das wiederholt.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
k.h.o.heli
20 September 2026 14:0420.09.2026 14:04
Hello Rainer,
Thanks for the quick info, I'll check the wiring first.
Regards, Kurt
Hallo Rainer,
Danke für die schnelle Info, werde die Verkabelung erst mal überprüfen.
Gruß Kurt
k.h.o.heli
15 October 2026 10:1515.10.2026 10:15
Hello Rainer,
The cables from the controller to the FBL were chafed in some places, I will get a new complete cable set.
Thank you so much for your help!
Regards, Kurt
Hallo Rainer,
die Kabel vom Regler zum FBL waren an einigen Stellen angescheuert, werde mir einen neuen kompletten Kabelsatz besorgen.
Vielen Dank für die Hilfe!
Gruß Kurt
RV
15 October 2026 19:5115.10.2026 19:51
:-) :-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
:-) :-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.