Tgilf
13 September 2026 21:0313.09.2026 21:03
Hello everyone!
I've assigned the volume control to potentiometer 2 on the Vbar Control Touch. I find that very practical.
Now the EVO had to give way to the NEO because I will be installing it in the 700.
Once the NEO is connected, turning potentiometer 2 no longer does anything.
What am I doing wrong?
Thank you and best regards
Tom
Hallo zusammen!
Ich habe in der Vbar Control Touch auf den Poti 2 die Lautstärke gelegt. Finde das sehr praktisch.
Jetzt musste das EVO dem NEO weichen weil ich es im 700er einbauen werden.
Sobald das NEO verbunden ist tut sich beim drehen am Poti 2 nichts mehr.
Was mache ich falsch?
Danke und viele Grüße
Tom
RV
13 September 2026 21:5413.09.2026 21:54
How did you assign the potentiometer?
Probably via the Parameters Modify app. And this assignment there is tied to the model (SN of the stabilizer). If you change the stabilizer, you'll just have to redo it ;-)
BUT:
Check the volume menu (system) under the advanced settings. You've been able to assign a general volume control there for a few months now ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Wie hast Du den Poti denn zugewiesen?
Vermutlich über die Parameter Modifizieren App. Und dies Zuweisung dort ist an s Modell (SN der Stabi) gebunden. Bei Stabiwechsel eben neu machen ;-)
ABER:
Schau mal im Lautstärke Menü (System) in dem erweiterten Punkt. Dort kann man seit ein paar Monaten einen generellen Poti zuweisen ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Tgilf
14 September 2026 05:5514.09.2026 05:55
Good morning
I did it via settings and volume. You can assign the potentiometer there. But the volume field is now grayed out and shows 0%?
Guten Morgen.
Ich hatte es über Einstellungen und Lautstärke gemacht. Dort kann man ja den Poti zuweisen. Das Feld mit der Lautstärke dort ist aber wie „ausgegraut“ jetzt und zeigt 0% an?
RV
14 September 2026 06:4614.09.2026 06:46
Then click on the button to the right of it...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Dann klick mal auf den Button rechts daneben ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Tgilf
14 September 2026 08:4014.09.2026 08:40
Thanks. Yes, you can assign the potentiometer there. That's what I've been doing so far. But when I turn potentiometer 2, I get the sound, but not the volume change indicator that used to appear in the top left corner. On my banks, I also always have the system and telemetry volume indicators. These changed analogously when you turned the potentiometer.
Something's wrong ????
Danke. Ja da kann man den poti zuweisen. Das hab ich auch so gemacht bisher. Aber wenn ich dann den poti 2 drehe kommt zwar das Geräusch aber nicht die Anzeige für die Lautstärke Veränderung die bisher immer kam oben links. Ich hab auf meinen Bänken auch immer die Anzeige für System- und Telemetrielautstärke. Die änderten sich analog wenn man den Poti gedreht hat.
Irgendwas ist falsch ????
RV
14 September 2026 21:1614.09.2026 21:16
That brings us to what I already wrote:
Quote: Probably via the Parameter Modify app. And this assignment there is tied to the model (SN of the stabilizer). Just redo it when changing stabilizers ;-)
Take a look at what's in the app on the connected model (the old stabilizer). Then program it the same way on the new stabilizer.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 14.09.2026 21:17 von RV.
Da wären wir bei dem hier was ich schon geschrieben hatte:
Quote:Vermutlich über die Parameter Modifizieren App. Und dies Zuweisung dort ist an s Modell (SN der Stabi) gebunden. Bei Stabiwechsel eben neu machen ;-)
Schau doch mal bei verbundenem Modell in diese App rein was da drin ist (alte Stabi). Und dann progge das eben so gleich bei der neuen Stabi.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 14.09.2026 21:17 von RV.