Hi,
Yesterday I was at a flying event and shortly before the end I showed a colleague the log view after the last flight on my Evo. Since I'm used to the Evo shutting down "by itself", I then packed it in my suitcase and stowed everything away.
This afternoon I heard a beeping sound coming from my hangar, and it was coming from my transmitter case. The Evo was still displaying the log, and the battery warning was at 3%. I'm a bit disappointed that the transmitter didn't shut down after a few hours in the LogView.
Furthermore, every time I want to "Completely Shut Down," I have to dismiss the log before I can press the "Completely Shut Down" button. That doesn't seem quite right, does it?
(I hold down the "on/off" button on the back => the "red button" appears and is located above the log of the last flight" => I hold down the "red button" => the "completely shut down" window appears behind the Logview window and I cannot access it without first manually closing the Logview window.
I think it would make much more sense if the window appeared before it, after all, that's how it is with the "red button".
Is it just me, or am I seeing/doing something wrong?
Edited twice. Last edited on 12/07/2026 at 17:00 by Smartflyer.
Yesterday I was at a flying event and shortly before the end I showed a colleague the log view after the last flight on my Evo. Since I'm used to the Evo shutting down "by itself", I then packed it in my suitcase and stowed everything away.
This afternoon I heard a beeping sound coming from my hangar, and it was coming from my transmitter case. The Evo was still displaying the log, and the battery warning was at 3%. I'm a bit disappointed that the transmitter didn't shut down after a few hours in the LogView.
Furthermore, every time I want to "Completely Shut Down," I have to dismiss the log before I can press the "Completely Shut Down" button. That doesn't seem quite right, does it?
(I hold down the "on/off" button on the back => the "red button" appears and is located above the log of the last flight" => I hold down the "red button" => the "completely shut down" window appears behind the Logview window and I cannot access it without first manually closing the Logview window.
I think it would make much more sense if the window appeared before it, after all, that's how it is with the "red button".
Is it just me, or am I seeing/doing something wrong?
Edited twice. Last edited on 12/07/2026 at 17:00 by Smartflyer.
Hi,
ich war gestern auf einem Flugtag und habe kurz vor Schluss einem Kollegen noch den Logview nach dem letzten Flug auf meiner Evo gezeigt. Da ich es gewohnt bin das die Evo "von alleine" abschaltet habe ich sie dann in den Koffer gepackt und alles verstaut.
Heute Mittag hörte ich dann ein "Piepsen" aus meinem Hangar und es kam aus meinem Senderkoffer. Die Evo zeigte immer noch den Log und die Akkuwarnung ertönte mit 3%. Ich bin da irgendwie ein bisschen enttäuscht das der Sender sich im LogVIeW nach einigen Stunden nicht ausschaltet.
Darüber hinaus muss ich beim "Komplett Ausschalten" jedes mal erst den Log weggdrücken damit ich auf den "Komplett Ausschalten" Button drücken kann. Das ist doch irgendwie auch nicht ganz richtig ?
(Ich halte hinten den "ein/aus" Knopf gedrückt=> der "rote Button" erscheint und liegt über dem Log vom letzten Flug"=> ich halte den "roten Button gedrückt"=> das "komplett Ausschalten" Fenster erscheint hinter dem Logview Fenster und ich komme nicht da dran ohne erst das Logview Fenster manuell zu schliessen.
Ich fänd es viel sinvoller wenn das Fenster dann auch davor erscheint, schliesslich ist es bei dem "roten Button" ja auch so.
Geht es nur mir so oder sehe/mache ich da was falsch ?
2 mal bearbeitet. Zuletzt am 12.07.2026 17:00 von Smartflyer.
ich war gestern auf einem Flugtag und habe kurz vor Schluss einem Kollegen noch den Logview nach dem letzten Flug auf meiner Evo gezeigt. Da ich es gewohnt bin das die Evo "von alleine" abschaltet habe ich sie dann in den Koffer gepackt und alles verstaut.
Heute Mittag hörte ich dann ein "Piepsen" aus meinem Hangar und es kam aus meinem Senderkoffer. Die Evo zeigte immer noch den Log und die Akkuwarnung ertönte mit 3%. Ich bin da irgendwie ein bisschen enttäuscht das der Sender sich im LogVIeW nach einigen Stunden nicht ausschaltet.
Darüber hinaus muss ich beim "Komplett Ausschalten" jedes mal erst den Log weggdrücken damit ich auf den "Komplett Ausschalten" Button drücken kann. Das ist doch irgendwie auch nicht ganz richtig ?
(Ich halte hinten den "ein/aus" Knopf gedrückt=> der "rote Button" erscheint und liegt über dem Log vom letzten Flug"=> ich halte den "roten Button gedrückt"=> das "komplett Ausschalten" Fenster erscheint hinter dem Logview Fenster und ich komme nicht da dran ohne erst das Logview Fenster manuell zu schliessen.
Ich fänd es viel sinvoller wenn das Fenster dann auch davor erscheint, schliesslich ist es bei dem "roten Button" ja auch so.
Geht es nur mir so oder sehe/mache ich da was falsch ?
2 mal bearbeitet. Zuletzt am 12.07.2026 17:00 von Smartflyer.
machine-translated from German · Show original