← VBar Control Touch / EVO

Acceptance of the parameter changes translated

VBar Control › VBar Control Touch / EVO · Started by flydown on 6 July 2026 21:0306.07.2026 21:03
flydown 6 July 2026 21:0306.07.2026 21:03
Hello,

Maybe a stupid question, but I'm still new to the Vbar world.
So, if I change a parameter, e.g. the sensitivity with this slider,
Will the value be changed "live" or will the new value only be applied after the slider is deactivated?
For example, I tap in the sensitivity field, the slider appears, I change the value, then I tap somewhere else.
When will the new value be adopted?

Greetings, Uwe



Edited once. Last edited on 06/07/2026 at 21:04 by flydown.
machine-translated from German · Show original
JMalberg 6 July 2026 21:5006.07.2026 21:50
Immediately, directly.

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
machine-translated from German · Show original
Eddi E. aus G. 7 July 2026 09:0107.07.2026 09:01
Hi Uwe,

A truly live, analog 'slider'. A load (wait) – change value, save (wait) – new load (wait) – change menu, load (wait) – next... doesn't exist here. That would drive you crazy :-)

Even if you were to turn off the model while the measuring tape is still in place, the value at its current position would be saved.

You can see it quite clearly when you change something where a servo moves along with it :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
flydown 7 July 2026 09:3407.07.2026 09:34
Great, thank you.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless