Hello, I'm new to the forum and I have a question for you.
I use my VbCt to control helicopters in Mode 3, and I control a fixed-wing aircraft with VPlane in Mode 1. When I started RC flying 25 years ago, I didn't give any thought to such basic settings.
When I was programming my first helicopter (Moskito Basic), the idea naturally arose to assign everything related to the swashplate to a single control stick. Unfortunately, control mode 1 for fixed-wing flight became so ingrained in my mind that I gave up after several attempts to relearn it.
Never mind... with my Futaba FF-9, I had to manually switch the stick mode from Mode 1 to Mode 3 and vice versa when changing models. The VbCt has a great app for this; it automatically switches the mode to match the model. That works very well so far.
Now I have a problem: after switching from my fixed-wing aircraft to the helicopter mode, and with a successful mode change, the helicopter's rotor starts to wander. Control input doesn't stop this wandering; after releasing the stick, the rotor (Logo 550SE) wanders back to the right.
Does anyone have any idea what the cause might be? If I manually switch the mode before connecting to the model, the switch works flawlessly.
Edited once. Last edited on July 5, 2026 at 12:29 PM by Thomas L.
I use my VbCt to control helicopters in Mode 3, and I control a fixed-wing aircraft with VPlane in Mode 1. When I started RC flying 25 years ago, I didn't give any thought to such basic settings.
When I was programming my first helicopter (Moskito Basic), the idea naturally arose to assign everything related to the swashplate to a single control stick. Unfortunately, control mode 1 for fixed-wing flight became so ingrained in my mind that I gave up after several attempts to relearn it.
Never mind... with my Futaba FF-9, I had to manually switch the stick mode from Mode 1 to Mode 3 and vice versa when changing models. The VbCt has a great app for this; it automatically switches the mode to match the model. That works very well so far.
Now I have a problem: after switching from my fixed-wing aircraft to the helicopter mode, and with a successful mode change, the helicopter's rotor starts to wander. Control input doesn't stop this wandering; after releasing the stick, the rotor (Logo 550SE) wanders back to the right.
Does anyone have any idea what the cause might be? If I manually switch the mode before connecting to the model, the switch works flawlessly.
Edited once. Last edited on July 5, 2026 at 12:29 PM by Thomas L.
Hallo ich bin neu hier im Forum und habe auch gleich mal eine Frage an euch.
Ich nutze meine VbCt zum steuern von Heli's im Mode 3,eine Fläche steuere ich mit VPlane im Mode 1.Als ich vor 25 Jahren mit dem RC-Fliegen anfing,habe ich mir über solch grundlegenden Einstellungen keine Gedanken gemacht.
Als ich dann bei der Programmierung meines 1. Heli's(Moskito Basic)war,kam natürlich die Überlegung alles bezüglich der Taumelscheibe auf einen Steuerknüppel zu legen.Leider hat sich der Steuermodus 1 beim Flächenflug so in meinem Kopf festgesetzt,daß ich es nach einigen Versuchen des Umlernen's aufgegeben habe.
Egal.......an meiner Futaba FF-9 musste ich halt beim Modellwechsel über einen Affengriff den Stickmode manuell von Mode 1 auf Mode 3 und umgekehrt ausführen.Die VbCt hat dafür ja eine tolle App,diese stellt automatisch passend zum Modell den Modus um.Das funktioniert erst einmal sehr gut.
Jetzt habe ich aber das Problem,daß nach dem Wechsel von meinem Flächenflieger zum Heli mit erfolgreichem Moduswechsel der HeRo anfängt zu wandern.Eine Steuereingabe beendet dieses wandern nicht,nach dem loslassen des Knüppels wandert der HeRo wieder nach rechts(Logo 550SE).
Hat eventuell jemand eine Idee was die Ursache sein könnte?Wenn ich den Modus vor dem Verbinden mit dem Modell manuell umschalte, funktioniert der Wechsel fehlerfrei..........
1 mal bearbeitet. Zuletzt am 05.07.2026 12:29 von Thomas L..
Ich nutze meine VbCt zum steuern von Heli's im Mode 3,eine Fläche steuere ich mit VPlane im Mode 1.Als ich vor 25 Jahren mit dem RC-Fliegen anfing,habe ich mir über solch grundlegenden Einstellungen keine Gedanken gemacht.
Als ich dann bei der Programmierung meines 1. Heli's(Moskito Basic)war,kam natürlich die Überlegung alles bezüglich der Taumelscheibe auf einen Steuerknüppel zu legen.Leider hat sich der Steuermodus 1 beim Flächenflug so in meinem Kopf festgesetzt,daß ich es nach einigen Versuchen des Umlernen's aufgegeben habe.
Egal.......an meiner Futaba FF-9 musste ich halt beim Modellwechsel über einen Affengriff den Stickmode manuell von Mode 1 auf Mode 3 und umgekehrt ausführen.Die VbCt hat dafür ja eine tolle App,diese stellt automatisch passend zum Modell den Modus um.Das funktioniert erst einmal sehr gut.
Jetzt habe ich aber das Problem,daß nach dem Wechsel von meinem Flächenflieger zum Heli mit erfolgreichem Moduswechsel der HeRo anfängt zu wandern.Eine Steuereingabe beendet dieses wandern nicht,nach dem loslassen des Knüppels wandert der HeRo wieder nach rechts(Logo 550SE).
Hat eventuell jemand eine Idee was die Ursache sein könnte?Wenn ich den Modus vor dem Verbinden mit dem Modell manuell umschalte, funktioniert der Wechsel fehlerfrei..........
1 mal bearbeitet. Zuletzt am 05.07.2026 12:29 von Thomas L..
machine-translated from German · Show original