← VBar Control Touch / EVO

Rotary encoder as motor safety translated

VBar Control › VBar Control Touch / EVO · Started by flydown on 18 June 2026 11:1518.06.2026 11:15
flydown 18 June 2026 11:1518.06.2026 11:15
Hello,

Perhaps the topic has already been discussed; if so, I would like to...
I would be happy to receive a link there.

Specifically, I would like the upper right rotary encoder.
It's set up as a motor safety "switch". Simply out of habit and because it makes more sense to me.
The transmitter is more likely to be opened intentionally than a switch.
But the switch configuration doesn't allow for that for me.
Or am I missing something?
How could that be done?

Thanks and greetings from a VBC newbie
Uwe
machine-translated from German · Show original
Eddi E. aus G. 18 June 2026 11:2818.06.2026 11:28
Hello Uwe,

Unfortunately, it's not that simple. The motor logic and, if needed/activated, the safety switches are hard-coded, including the fail-safe handling.

One could construct something from a roundabout way using macrocells, a channel function with fail-safe position on the ESC, a multiplexer as input with a potentiometer as a transmitter, a fixed-value cell for the off position and center position (motor OFF percentage value), and the on position (FC ESC) (the actual throttle logic with motor switch, idle, and possibly a safety switch).

Extensive testing would be necessary, including with the BMFA fail-safe app; the engine must switch off for safety reasons when fail-safe is activated.
And it poses risks if the motor switch is in the "On" position and you turn the potentiometer, as the controller would already have initialized (because it saw the motor was off), then the entire throttle logic depends on the potentiometer and possibly also on the additional safety switch.

You can make it complicated ^^ or just concentrate when the system is 'hot' :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
flydown 18 June 2026 11:3518.06.2026 11:35
Thanks,
Okay, then unfortunately it's not possible.

Greetings, Uwe
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless